Buy Surgical Knives in Nigeria.

How do I buy surgical knives in Nigeria?

Begin with the exact article reference in the approved purchasing list. “Knife” alone does not distinguish the two product families here, and even the two products within each family have separate codes and descriptions. Keep the full model title, length and other listed attributes alongside the requested quantity.

For a multi-model order, place every article on its own line. If the request names a SIMON Fistula Knife, include BA605R or BA606R as specified. If it names a Diamond Knife, include FD114D or FD115D and retain the retro or wedge wording. The buyer can then compare the quotation with the exact requested model instead of relying on a broad category name. Keep different codes on separate order lines even if the same department requests them together. This preserves quantity, offer and receiving checks for each knife.

Which four article records are included?

The table preserves each manufacturer title and its listed details. The SIMON records provide length; the Diamond Knife records also state a 45-degree angle, sharp tip, round handle and colour. This difference in available fields means the table should be read code by code rather than as a generic family specification.

Official B. Braun/Aesculap product pages: BA606R; BA605R; FD114D; FD115D. Check the exact page when comparing an offer.

How do the SIMON fistula knife lengths compare?

BA605R is listed at 205 mm overall length, while BA606R is 215 mm. The titles otherwise identify both as SIMON Fistula Knives. If a requisition specifies one of these article numbers, retain it with the length; do not treat the two lengths as a size range or substitute one code for the other without review.

The manufacturer pages for these two SIMON models do not list the same additional angle, tip, handle or colour fields as the Diamond Knife records. If a procurement form asks for one of those details, check the exact manufacturer source rather than borrowing the information from the other family. The absence of a field in the comparison is not evidence that two articles match on it.

What distinguishes the two Diamond Knife records?

FD114D and FD115D are both listed as Diamond Knives at 45 degrees and 205 mm, with sharp tips and round handles. The title differentiates FD114D as retro and FD115D as wedge. The colour field is copper-coloured for FD114D and black for FD115D. Keep the code, profile description and colour together when those fields matter to the approved purchase description.

Because the pair shares several listed details, a shortened quote that says only “45-degree Diamond Knife, 205 mm” would not fully identify the requested record. Ask the supplier to state the exact code and product title. If the offer changes from retro to wedge or gives a different colour, flag it as a model distinction for review rather than treating it as a cosmetic wording variation. For example, an FD115D offer against an FD114D request shares the stated 45-degree angle and 205 mm length, but the title changes from retro/copper-coloured to wedge/black. For BA605R and BA606R, the title pattern is shared while overall length differs by 10 mm. These are concrete checks that help a reviewer spot where an offer departs from the requested record.

How should listed and missing fields be handled?

The manufacturer records provide different detail sets for the two families. The SIMON entries identify their title and overall length on the product pages. The Diamond Knife entries additionally identify angle, tip, handle and colour. Preserve only the values stated for the exact product. If an internal purchasing requirement asks for material, package quantity, blade dimensions or another field not present in the reviewed record, mark the point unresolved and request product-specific confirmation.

The manufacturer pages do not specify commercial unit, included accessories, package presentation, current price, Nigerian availability or delivery schedule. A product title does not settle those terms. Ask Franance to identify the exact article and included items on each quote line, alongside the commercial terms.

A buyer can keep a field-by-field source check: for BA605R and BA606R, verify article number, SIMON title and stated overall length; for FD114D and FD115D, also compare angle, retro or wedge wording, sharp tip, round handle and colour. If the purchasing matrix asks for a field not listed on the applicable page, mark it “not stated in reviewed source.” Do not carry a handle, colour or angle detail from a Diamond Knife into a SIMON line.

The colour descriptions belong to the two Diamond Knife records only. Use the source language “copper-colored” for FD114D and “black” for FD115D, and retain both the title descriptor and code. If a requirement does not depend on colour, the purchaser can still use the code and profile fields to make the exact article match clear.

How should a buyer review a substitute?

When a different code is offered, compare the full manufacturer title and fields against the requested product. For SIMON, check the 205 mm or 215 mm length and article number. For the Diamond pair, compare 45-degree angle, length, retro or wedge description, sharp tip, round handle and colour. Keep the offered article on a separate line with its own source link and dimensions.

If a quote proposes a different knife, compare its exact model details with your organisation’s requirement and have the responsible reviewer approve the change. If the source page omits a required field, seek confirmation for that exact model rather than transferring a value from another knife. Record the approval and preserve the original requested reference so the change is traceable.

What should the quotation and record include?

Ask Franance for a written quotation naming the article code, full description, quantity, commercial unit, package details, price and delivery terms for the destination. For the Diamond examples, include any required blade description and colour; for the SIMON pair, retain the exact length and code. Request clarification if the quoted description is abbreviated or does not identify which item is offered.

For internal comparison, keep the manufacturer URL, requested code, offered code, source-listed attributes and open questions with the quote. If multiple models are needed, use a separate quantity for each line. If an alternative is approved, preserve the original line and the reviewer’s decision in the purchase record. This links the manufacturer record to the commercial proposal and the item checked on receipt.

At receiving, compare the delivered label and supplier paperwork with the code and full title on the approved order. If the quotation or confirmation shortens the model name, resolve that difference before the record is closed. Keep the original source URL so another reviewer can recheck the same manufacturer description. This simple trail helps distinguish a real product substitution from a formatting change and keeps the requested and offered products traceable through procurement.

Send the itemised request and Nigerian delivery destination through the Franance quote cart. Confirm current price, availability and delivery terms in the written response for the specific order.

How can the four listed knife articles be separated in a requisition?

Use four distinct lines rather than describing the group as “surgical knives.” BA605R and BA606R are SIMON Fistula Knife records at 205 mm and 215 mm respectively. FD114D and FD115D are both 45-degree Diamond Knife records at 205 mm, but the titles distinguish “retro” from “wedge”; both list a sharp tip and round handle, while the colour descriptions differ. These title details are useful identifiers, not an invitation to infer a blade material or clinical application that the source does not state.

Put the exact code first, then retain the complete manufacturer title and requested quantity. This prevents the common-length Diamond Knife entries from being collapsed into a single generic line and keeps the two SIMON lengths distinct. If the requisition uses a local name or an abbreviated pattern, attach the manufacturer page or a copy of its full title for review before requesting a substitution. Franance can quote against the itemised list and return the exact offered code and written terms for comparison.

Which differences require written clarification before approval?

Clarify any requirement that is absent or ambiguous in the product record. The listed SIMON pages identify each model and length, while the Diamond Knife records add angle, title variant, tip, round handle and colour. The listed facts do not establish packaging, included accessories, sterilisation state, commercial unit or current availability. If any of those matters is part of the procurement specification, ask Franance to confirm it against the exact article in the quotation.

For FD114D and FD115D, do not treat “retro” and “wedge” as interchangeable wording, or assume that the colour alone defines the variant. For BA605R and BA606R, do not replace the two stated lengths with a rounded or approximate value. Preserve the source title in the approval record and mark unprovided details as pending. A reviewer can then compare the offer against the original requirement and decide whether a changed description needs approval before the order is placed.

How should variants be checked when titles share a knife family?

A shared family label is only one part of the identity check. BA605R and BA606R both carry the SIMON Fistula Knife name but have different stated lengths; FD114D and FD115D both carry the 45-degree Diamond Knife name but distinguish “retro” and “wedge.” A buyer should therefore compare code and full title before comparing dimensions. If a requisition abbreviates the requested style, confirm the intended variant with its author rather than selecting whichever page appears closest.

Keep the exact wording in the approved line and ask Franance to return the offered code in writing. If the offered title differs, record the changed attribute and pause the comparison until the relevant reviewer confirms it. This is particularly useful when a buyer’s local term does not match the manufacturer title. Source pages establish the named variants and listed features; they do not establish equivalence, accessory inclusion, commercial package or current supply. Those details belong in the exact-item quotation or the organisation’s specification review.