Franance helps buyers in Nigeria source surgical raspatories. Compare exact article codes, manufacturer descriptions and the dimensions or pattern your specification requires, then request a written quotation for the precise items.
To buy surgical raspatories in Nigeria, send Franance the exact article code, full manufacturer title, quantity and delivery destination for a written quotation. The selected B. Braun/Aesculap examples include single-ended and double-ended descriptions, named patterns, and micro raspatories with different shapes and widths. Use the complete product title on each purchase line rather than the broad family name alone.
The table below gives ten manufacturer-listed articles. Check the product page for the specific code before comparing a quote, especially where title and structured fields use different wording.
How do I buy surgical raspatories in Nigeria?
Start with the code in the approved schedule and compare the complete manufacturer title against the offer. A generic request for “raspatory” does not distinguish the named BUECHS, OBWEGESER, WILLIGER, MOLT, SYME, FRETWURST ERGOPERIO, YASARGIL Micro or Noir® records. If the internal form uses a short name or translation, keep that wording as a note and retain the manufacturer title beside it.
For multiple models, use one line per code and requested quantity. Include width and end configuration when those fields are stated. If a required measurement is not present for a particular product, mark it unreported and request exact-item clarification rather than copying a value from another pattern.
Which B. Braun/Aesculap examples are included?
The table preserves the ten article titles and listed details, including form, geometry, tip and width values where recorded. The exact articles are DB024R, DO518R, DO530R, DO510R, DB850R, DO543R, DO547R, FD320R, FD305R and FD832B. A broad family name or pattern alone is not a substitute for the code.
Noir® Raspatory, 200 mm (7 7/8"), sharp, width: 2 mm; Length: 200 mm; Width (mm): 2 mm; Tip profile: sharp
How do end configuration and tip descriptions differ?
The records describe both single-ended and double-ended forms. DO518R, DO530R and DO510R are listed as single ended; DB024R, DB850R, DO543R and DO547R are double ended. Their tip descriptions also differ: examples include sharp/sharp and sharp/blunt for double-ended patterns, while the selected single-ended records state sharp. Keep the end count and tip profile together when the approved specification mentions them.
The YASARGIL Micro entries and Noir® listing use their own title and detail fields. Do not infer end count or tip orientation beyond what the exact source reports. If a purchaser needs more detail than the listing provides, request a drawing or written clarification for the specific article.
For the double-ended entries, the source distinguishes the tips explicitly. DB024R and DO547R are sharp/sharp, while DB850R and DO543R are sharp/blunt. DB024R also lists paired jaw widths of 3 mm and 2.60 mm; DB850R lists 4 mm/4 mm; DO547R lists 4 mm/4 mm. Keep first and second values in order when the specification requires both working ends. A single-width field would lose information for DB024R and could make a quote appear to match when the second measurement was never checked.
Which named patterns and measurements distinguish the articles?
The named patterns create useful distinctions among products with the same category label. DO530R is titled OBWEGESER Raspatory (Swallow Tail); DO543R is MOLT; DO547R is SYME; and DO518R is BUECHS. The source titles also use FRETWURST ERGOPERIO for DB024R. Keep those names intact in procurement records rather than shortening them to “standard” or “special” without a source basis.
The listed overall lengths range from 140 mm for WILLIGER DO510R to 200 mm for Noir® FD832B. Other examples include 170 mm DO530R, 180 mm DO543R and 185 mm DB024R or DO547R. Stated width values also differ: DO510R lists 4.20 mm, DO530R 8 mm and DO518R 9 mm; these numbers belong to those specific models. Do not read them as a continuous series or apply them to another pattern.
How do the YASARGIL micro raspatories compare?
FD320R is titled YASARGIL Micro Raspatory with downward curvature and bayonet-shaped form. FD305R is also a YASARGIL Micro Raspatory, but its title says curved rather than curved downwards and does not include bayonet-shaped wording. Both list 185 mm overall length and 2.800 mm width, and both have round handles in the detail fields. The differing shape descriptions matter even though the listed length and width match.
The third micro-style example, Noir® FD832B, is listed at 200 mm with a 2 mm width. The selected detail set does not provide the same handle or geometry fields for it. Keep its code and reported facts separate instead of carrying YASARGIL details across to the Noir® article.
How should a buyer handle an unclear source description?
DB850R deserves careful handling because its manufacturer title contains both “straight” and “curved,” while its separate detail field records “Geometry: straight.” Preserve the title and the structured field as provided; do not edit one to make it agree with the other. Ask the exact manufacturer page or supplier to clarify the wording before relying on a particular interpretation in an approved specification.
More generally, a title and a structured product attribute can present related information differently. Keep both in the record and flag a mismatch for confirmation. The guide does not resolve ambiguity by guessing. If a source omits a required measurement or configuration, leave the value unanswered until the exact item is checked.
What belongs in a quote and comparison record?
Ask Franance for a written quotation that names the code, full description, commercial unit, quantity, package contents, price and delivery terms for the destination. The manufacturer records identify products and selected features; they do not establish a common package quantity, included accessory, current price, Nigerian availability or delivery schedule. Request those details for the exact order.
For comparison, keep requested code, offered code, source URL, geometry, end count, tip, width and length in labelled fields. Preserve any unresolved question, such as DB850R’s title wording, and keep a proposed alternative on a separate line. If a different model is accepted, record who approved the change and retain the original requested article in the file. For double-ended models, record both width values in source order; for a single-ended model, do not add a second-end value unless a source supports it. This makes the table useful for later quotation checks instead of reducing the records to a family name.
Submit the itemised schedule and destination through the Franance quote cart. Current commercial terms should be confirmed for the specific quotation.
How should single-ended and double-ended raspatories appear on a schedule?
Record the form explicitly rather than assuming that every raspatory has two working ends. The listed product pages identify DB024R, DB850R, DO543R and DO547R as double ended, while examples such as DO518R, DO530R and DO510R are single ended. Several double-ended records also specify different tip pairs, including sharp/sharp and sharp/blunt, and different widths at the two ends. One broad item label would conceal those distinctions.
For each requested article, copy the exact code and record its listed form, geometry, length, tip wording and one or two widths as supplied. Preserve paired widths in order; do not turn 3 mm/2.60 mm into “about 3 mm.” If the source title and structured detail appear to disagree, retain both source statements and request clarification for that exact code before the quote is approved.
How can named patterns be compared without inferring a use?
The listed product titles include FRETWURST ERGOPERIO, BUECHS, OBWEGESER (Swallow Tail) and WILLIGER patterns, plus a generic raspatory record. These names help differentiate catalogue entries, but the product pages do not establish that two named patterns are equivalent simply because both are curved or have a similar width. Keep the title with the article code and avoid replacing it with a generic local shorthand in the purchase line.
If a department requests an alternative, compare the requested and offered article side by side using fields actually present in the source page: named pattern, overall length, straight or curved geometry, single or double-ended form, tip wording and width. Mark missing details instead of inferring them. Franance’s written quote should identify the exact offered item and quantity. A buyer can then route any difference to the person responsible for the approved specification and preserve a clear record of what was requested, quoted and accepted.
How should paired widths and tip descriptions be transcribed?
For double-ended raspatories, keep width and tip information in the order shown by the source title. DB024R is listed with a 3 mm/2.60 mm width pair and sharp/sharp tips; DB850R has a 4 mm/4 mm pair and sharp/blunt wording. A single value or a generic “double-ended” label would discard the differences between its working ends. For single-ended records, retain the single-end description and do not manufacture a second width field.
If the purchase template does not provide enough columns, combine the facts in a labelled description such as “first width …; second width …; tip …” rather than compressing them into shorthand. Preserve exact precision and source wording. Ask the quote to repeat the article code and full product description, then compare each field with the requested line. When source wording seems inconsistent, record both statements and ask for exact-code clarification. This offers a practical audit trail while keeping the manufacturer wording attached to the comparison.
Common questions
Where can I buy surgical raspatories in Nigeria?
Send Franance the exact article code, quantity and destination through the quote cart and request a written quotation.
Which listed raspatories are double ended?
The manufacturer pages identify DB024R, DB850R, DO543R and DO547R as double ended. Keep each code and its tip description separate.
How do the two YASARGIL Micro Raspatories differ?
FD320R is titled curved downwards and bayonet-shaped; FD305R is titled curved. Both list 185 mm length, 2.800 mm width and round handle.
Does the DB850R title agree with its geometry field?
The title says “straight, curved,” while the separate geometry field says “straight.” Preserve both and request clarification before relying on the ambiguous wording.
Does the source page establish package contents or local availability?
No. Ask Franance to confirm the commercial unit, package, current price, availability and delivery terms for the exact item.
Request a quotation for surgical raspatories in Nigeria
Send the exact article code, requested quantity and destination through the Franance quote cart. Review the quoted model and written commercial terms before confirming an order.
