Buy MRI Systems in Nigeria.

Where can I buy MRI systems in Nigeria?

Request a quotation from Franance for the MRI system or component your hospital, imaging centre or project requires. The current list includes named products from Fujifilm, GE HealthCare, Philips, Siemens Healthineers, Neusoft, Bayer and Mydax. Use the category pages below to review model records and send Franance the exact references you want assessed.

For a complete scanner project, share more than a magnet strength. State the clinical service scope established by your institution, target workload, required applications, patient access considerations, room and building constraints, available electrical and cooling infrastructure, digital connectivity, procurement documentation and delivery address. The final equipment schedule should identify the scanner model and configuration, coils, table, injector, cooling equipment and any other included or excluded items. Ask for written confirmation of availability, equipment condition, price validity, delivery lead time, warranty and after-sales support before making a purchasing decision.

The current catalogue is a starting point for enquiry, not proof of stock, local registration, distributor appointment, installation readiness or service coverage. Franance can review an exact listed model and clarify the quotation scope. The facility's qualified imaging, medical physics, engineering and procurement teams remain responsible for evaluating the proposed system, site and acceptance requirements.

Which MRI scanners are listed in Nigeria?

Franance's current named scanner listings include Siemens Healthineers MAGNETOM Sola and MAGNETOM Sempra at 1.5T; Philips Ingenia Ambition X at 1.5T; Siemens Healthineers MAGNETOM Lumina and GE HealthCare SIGNA Pioneer at 3T; open Fujifilm APERTO Lucent 0.4T and AIRIS Vento 0.3T systems; and Neusoft NeuMR Rena in the broader MRI systems category. The 1.5T MRI scanner listing and 3T MRI scanner listing group models by the catalogue's stated field strength. The open MRI scanner listing groups the two open-platform systems.

Field strength helps organize a comparison, but it does not by itself determine which system meets an institution's need. Ask the technical team to compare the full system configuration, bore or open design, table and patient access, RF and gradient capability, software, coils, applications, siting, utilities, maintenance and total project scope. Manufacturer descriptions are model-specific: features advertised for one scanner should not be assumed for another model or configuration.

Use these Franance filtered listings to review the named scanner models:

- Siemens Healthineers MAGNETOM Sola, MAGNETOM Sempra and Philips Ingenia Ambition X.
- Siemens Healthineers MAGNETOM Lumina and GE HealthCare SIGNA Pioneer.
- Fujifilm APERTO Lucent and Fujifilm AIRIS Vento.
- Neusoft NeuMR Rena.

Compare the same approved requirement across proposals. Ask each supplier to identify any optional software, coil, patient table, comfort feature, reconstruction tool or service plan included in the price. Request the current model-specific technical documents and a written list of deviations. This is especially useful when procurement documents specify mandatory attributes: an overview page or marketing name cannot replace the technical schedule.

How do 1.5T, 3T and open MRI systems differ?

1.5T and 3T identify the nominal magnetic field strength of the listed scanners. Neither label alone establishes image quality, examination suitability or operating cost. The facility's clinical scope, workload, expertise, patient access, configuration and lifecycle resources should guide the comparison; 3T is not automatically the better choice for every project.

Open MRI describes a different magnet and patient-access design from a conventional cylindrical bore. Fujifilm describes APERTO Lucent as a 0.4T open-sided system with a single-pillar form and lateral table movement. Franance lists AIRIS Vento as 0.3T; confirm its exact version and current documents in a quotation. Compare each design with the institution's positioning needs, room plan and required examinations.

Ask qualified clinical and engineering reviewers to define the applications, bore or open configuration, gradients, RF chain, table, coils, software, utilities, installation and service criteria. Franance can reflect those requirements in the quotation; a category label is not a clinical recommendation.

What 1.5T MRI scanners can I request in Nigeria?

The current 1.5T category contains three records: Siemens Healthineers MAGNETOM Sola, Siemens Healthineers MAGNETOM Sempra and Philips Ingenia Ambition X. Browse the 1.5T MRI scanner category or open each filtered listing above. The manufacturer pages describe different product families and system capabilities, so evaluate each proposed configuration against your own approved schedule rather than combining published features into a single assumed package.

For a 1.5T enquiry, specify exact model, software and application requirements, coil coverage, table, accessories, interfaces and room information. Ask for equipment condition, included delivery and installation, commissioning, training, warranty and service; list exclusions clearly.

What 3T MRI scanners can I request in Nigeria?

The current 3T category lists Siemens Healthineers MAGNETOM Lumina and GE HealthCare SIGNA Pioneer. Review the 3T MRI scanner listing and compare the exact model configurations. Manufacturer descriptions discuss technologies and applications unique to particular systems; those descriptions do not establish that a feature is included in every offered version or that it is available in Nigeria.

Ask the quotation to name the magnet and software version, gradient and RF configuration, coil inventory, table, workflow options and site requirements. Include room location, access, power, cooling and supporting-equipment details approved by the facility's project team. Confirm responsibility for site preparation, installation and handover documentation.

Are there open MRI scanners in the Franance catalogue?

Yes. The current open MRI category has two Fujifilm records: APERTO Lucent 0.4T and AIRIS Vento 0.3T. Review the open MRI scanner listing, then send Franance the exact model and required configuration. Fujifilm's official APERTO Lucent page identifies its 0.4T permanent magnet and open-sided single-pillar design. AIRIS Vento's current configuration and regional availability should be confirmed against current manufacturer documentation and the quotation.

Open architecture may matter to patient access and positioning, but it does not alone answer whether a system will meet the institution's imaging and throughput requirements. Have the clinical and technical teams assess the actual applications, field strength, patient table, coils, room footprint, utilities, service arrangements and lifecycle costs. Request current drawings and site requirements for the exact model under consideration; do not plan an installation from a generic product photograph.

Which MRI coils, tables and injectors are listed?

Supporting equipment has its own category because compatibility and scope need explicit review. The MRI RF coil listing includes GE HealthCare SIGNA PremierAIR Multi-Purpose MRI Coil Medium, GE HealthCare AIR Anterior Array MRI Coil and Philips dStream HeadSpine MRI Coil. The MRI patient table listing includes GE HealthCare SIGNA One MRI Patient Table and GE HealthCare MRI Patient Table 5127223-3.

Coils are model-specific receiving components, not universal MRI accessories. Confirm the exact scanner platform, coil model, anatomical coverage, connectors, software and supported configuration with the scanner manufacturer and facility's technical team. GE describes AIR Coils as flexible coil technology for compatible SIGNA systems; Philips describes dStream HeadNeckSpine as an integrated coil solution. Those manufacturer descriptions should not be interpreted as cross-platform compatibility.

The MRI contrast injector category contains Bayer MEDRAD MRXperion and MEDRAD Spectris Solaris EP. Bayer identifies MRXperion as its MR injection system and lists Spectris Solaris EP among discontinued products. Because product lifecycle and availability can change, Franance should confirm whether an exact Spectris Solaris EP configuration can be quoted and whether the enquiry is for replacement parts, an existing installed system or a current alternative. Do not assume a discontinued model is new, available or supported. For any injector, verify scanner-room MR conditions, system interfaces, syringe and disposable compatibility, required accessories, software, installation and training with current manufacturer documents and qualified staff.

The product records are available through GE SIGNA PremierAIR Multi-Purpose Coil Medium, GE AIR Anterior Array MRI Coil, Philips dStream HeadSpine MRI Coil, GE SIGNA One MRI Patient Table, GE MRI Patient Table 5127223-3, Bayer MEDRAD MRXperion and Bayer MEDRAD Spectris Solaris EP.

Which MRI chillers are listed in Nigeria?

The MRI chiller category lists Mydax 1M30A-OD and 1M30AS-OD outdoor air-cooled chillers. Mydax's official medical page describes the 1M30A-OD for MRI cooling and publishes model-specific flow and cooling information. The manufacturer's document, system configuration and site conditions must be checked for the exact chiller being quoted.

A chiller must not be selected from a broad capacity comparison alone. Ask the MRI system manufacturer or authorized project engineer for the required heat-rejection and coolant conditions, flow, pressure, temperature range, fluid mix, piping interfaces, ambient conditions, electrical supply and redundancy expectations. Then compare the chiller's current data sheet with those requirements. Confirm that the scanner manufacturer accepts the proposed arrangement and that the quotation defines delivery, installation, commissioning, warranty and maintenance responsibilities.

Review both Mydax 1M30A-OD and Mydax 1M30AS-OD. The model names are similar, but the offered unit's exact suffix, serial/configuration, performance and compatibility should be confirmed in writing. Do not treat a product listing as proof that either model is an approved replacement for a specific MRI scanner.

How much does MRI equipment cost in Nigeria?

This category does not publish a verified fixed price for MRI scanners or accessories. Request a dated quotation from Franance for the exact model, configuration, equipment condition, quantity, delivery destination, documentation and technical scope. Scanner projects can include separate costs for the magnet system, coils, table, injector, chiller, room works, freight, installation, commissioning, training, warranty and service. Ask that included items, optional items, exclusions, taxes, delivery assumptions and quote validity be stated separately.

For a useful comparison, submit the same technical schedule to each supplier and ask for a line-item response showing model, configuration and exceptions. A low total that omits site work or required accessories may not represent an equivalent project. Similarly, a global manufacturer's list price does not establish Nigerian landed cost, current availability or service entitlement. Confirm all commercial terms directly in the final written offer.

What should I send Franance for an MRI quotation?

Send the preferred model or approved minimum specification, quantity, facility and state, delivery timeframe, room status, utilities and any existing scanner or component references. Attach the technical schedule or tender response format, and separate scanner, accessory and project-service requirements.

For a scanner, specify the required platform, field strength, software, applications, coil set, table and site scope. For a coil, name the parent scanner and exact part number; for an injector, say whether you need a new system, replacement or service; for a chiller, provide the scanner manufacturer's cooling specification. Ask the written offer to confirm availability, condition, lead time, warranty, delivery, installation, acceptance documents and support.

Franance follows up by phone or email to clarify the request and prepare a quotation. Qualified institutional professionals must assess clinical suitability, compatibility, compliance and site acceptance using current manufacturer documents.

How should a hospital compare MRI scanner quotations?

Give every supplier the same schedule: modality, required field strength and architecture, applications, software, table, coils, accessories and mandatory-versus-preferred criteria. Require any deviation and its supporting documentation to be identified.

Compare exact model, configuration, condition, included and optional components, software version, warranty and support. Ask whether each feature is standard, optional or licensed; brochures may describe a product family rather than the proposed unit. List who supplies the scanner, coils, table, injector, chiller, console, workstations and interfaces. Identify retained accessories by exact model and have compatibility confirmed in writing.

What site information is needed before installing an MRI system?

Use the current site-planning package for the exact model, with the manufacturer's project team and facility engineers. Room dimensions, structure, delivery route, power, cooling, ventilation, utilities and environmental conditions can affect the project; this guide does not establish shielding, quench routes, structural loads or readiness.

Tell Franance whether this is a new room, replacement or expansion. Share available drawings, access and floor details, project stage and technical contacts. Have engineers assess any reused infrastructure against the proposed model's current requirements.

Ask the quotation to assign responsibility for the survey, room preparation, utilities, transport, rigging, installation, testing, interfaces, training and acceptance records. Separate included work from prerequisites and local construction.

What service and lifecycle information should I confirm?

For used, refurbished or replacement equipment, request the asset identity, known age or refurbishment status, installed configuration, software level, available service history, exclusions, warranty and acceptance basis. Have institutional reviewers define acceptable condition; a photo or listing title cannot establish magnet performance or remaining service life.

For accessories, clarify included consumables, service kits, licences and parts. Check injector disposables against current documentation and institutional procedures, and obtain scanner-manufacturer compatibility confirmation for coils, chillers and tables. Record model and serial numbers at handover.

Can Franance supply MRI equipment to states and cities across Nigeria?

Facilities across Nigeria can start with the same MRI category and model filters. Include the destination state, facility address, access details, quantity and project contact so Franance can confirm delivery, installation and service arrangements for that specific request. The catalogue does not promise identical coverage, stock or support in every city.

For multi-site tenders, list each destination, quantity and any different configuration, delivery sequence, installation or training requirement. Ask for those assumptions to be stated per site in the quotation.

What does Franance's quote-order process mean?

Use the product pages to shortlist equipment and submit an enquiry. Franance follows up by phone or email; the request does not take payment, reserve stock or confirm delivery. The purchase proceeds against a written quotation and agreed acceptance terms.

Include the equipment list, destination, quantity, timing, project contact and tender reference if applicable. Attach the specification and say whether the named model is mandatory or an example. When the quotation arrives, check exact configuration, condition, included items, currency, validity, taxes, delivery, installation, warranty and exclusions before approval.