Buy X-ray Grids & Cassettes in Nigeria.

Where can I buy X-ray grids and CR cassettes in Nigeria?

Browse the X-ray grids and cassettes category. The current product filters are GE HealthCare FlashPad Grid Assembly 5731040 and FUJIFILM FCR Imaging Plate Cassette Type CC. Each link narrows the listing by brand, category and model or type reference.

Read the GE 5731040 catalogue listing or FUJIFILM Type CC cassette record and prepare the system details requested below. The listing does not confirm local stock, current price, delivery date, compatibility with an unlisted revision, or whether fitting and testing are included. Ask for these points to be stated in the quotation.

Which grid and cassette products are listed?

The GE item is a FlashPad Grid Assembly, item 5731040, with a 6:1 grid ratio. GE HealthCare Service Shop lists Discovery XR656, Discovery XR656G2, Optima XR220, Optima XR646 and Precision 500D among compatible products. GE also lists equivalent item 5363606 as a FlashPad Grid Holder Assembly 6:1. These are manufacturer-listed references; they do not remove the need to check the installed system configuration, detector and holder, existing part number and revision.

The FUJIFILM item is IP Cassette Type CC. FUJIFILM's FCR PRIMA brochure identifies this cassette and the Imaging Plate ST-VI as FCR PRIMA system supplies. It lists multiple sizes, including 35 × 43 cm, 35 × 35 cm, 10 × 12 in, 8 × 10 in, 24 × 30 cm, 18 × 24 cm and 15 × 30 cm. The product record represents a cassette type across several listed sizes, not a bundled set containing every format.

These two catalogue entries serve separate system roles and are not substitutes for each other. The GE grid is not a cassette or detector; the FUJIFILM cassette is not an anti-scatter grid, CR reader, imaging plate by itself, or DR panel. Confirm which component is missing or being replaced before you order.

Buy GE HealthCare FlashPad 6:1 grid assembly 5731040 in Nigeria

GE lists part 5731040 as a FlashPad Grid Assembly 6:1. Its Service Shop page names certain compatible radiography systems, and shows the equivalent item 5363606 as a FlashPad Grid Holder Assembly 6:1. The 6:1 designation and system names are useful for initial identification, but they do not specify every installation detail for your equipment.

For a compatibility enquiry, share the full radiography-system model and serial number, installed detector model and part number, grid holder or tray reference, the grid currently fitted, any label or revision marking and the service history if available. Ask GE or the authorized technical supplier to confirm the grid assembly, holder, focal distance, working distance, orientation and any other matching interface for that specific installation. Do not infer compatibility from the FlashPad family name alone.

The assembly should be quoted as the identified grid component. Ask whether the offer includes a holder, mounting hardware, inspection, fitting, alignment or post-installation checks; the product page does not make every service part of the item. If the system uses an alternative or updated equivalent part, request a written statement of the applicable replacement and revision before order acceptance.

Buy FUJIFILM FCR Type CC imaging plate cassette in Nigeria

FUJIFILM lists IP Cassette Type CC for the FCR PRIMA system and separately names Imaging Plate ST-VI among the system supplies. Its brochure provides a list of matching cassette and imaging-plate formats. This source-specific relationship is important: the reader, cassette type, plate type and selected size must be considered together.

When requesting Type CC, identify the CR reader model and, if available, serial number; the cassette type; the exact cassette size; the matching imaging-plate reference and size; and the required quantity. Ask FUJIFILM or the supplier to confirm that the specific combination is supported by the reader. A listed cassette size does not establish that the cassette will fit every reader, plate, bucky tray or radiography system. Likewise, a size match alone does not prove that an imaging plate is compatible with a given cassette or reader.

Ask whether the quote is for an empty cassette shell, a cassette with an imaging plate, or a specific bundled supply. Confirm packaging, replacement interval or lifecycle guidance only from manufacturer documentation for the exact item. Do not assume that a cassette includes an imaging plate or that it can be interchanged with another brand or cassette family.

How is an anti-scatter grid different from a cassette?

An anti-scatter grid is a radiographic component placed within a system's imaging arrangement to manage scattered X-rays reaching the image receptor. GE identifies its product as a 6:1 FlashPad grid assembly. Other grid designs may specify details such as size, ratio and source-to-image geometry; Siemens Healthineers, for example, offers grids in different sizes, ratios and source-image distances. Those parameters are model-specific and should be checked against the system documentation by a qualified technical team.

A CR cassette has a different job. In a computed-radiography workflow, an imaging plate records the exposure and is later processed by a CR reader. FUJIFILM's FCR PRIMA system materials list an IP cassette, imaging plate and image reader as different elements of the system. The cassette holds the plate during use; it is not the plate reader, and a grid is not the CR cassette.

Never use one component's size, ratio or model name to identify the other. If you are replacing a grid, provide the system and holder references. If you are replacing a cassette, provide the CR reader and the cassette and imaging-plate references. If you are uncertain which part failed, share a photo of the component label and ask the service engineer to identify it before ordering.

How do I confirm a grid fits my radiography system?

Start with the system manufacturer's parts catalogue or service documentation for the installed system. Provide model, serial number, detector type, holder or tray, original part number, revision, and any modification history. Compare these against the manufacturer-listed compatible system list and ask the supplier to verify the exact configuration. A system family may have multiple generations, detectors and holders, so a family name alone can be incomplete.

Ask for confirmation of grid ratio, grid size, focal distance, working distance, orientation and mechanical interface when applicable. The responsible biomedical engineering or service team should confirm the replacement part and any installation procedure. The guide does not recommend a patient-exposure technique or decide when a grid should be used; those are clinical and equipment-operation decisions governed by the system instructions and qualified staff.

If the part is labeled with a superseded number, equivalent item or replacement revision, request written confirmation that the proposed item is the correct replacement for your installed system. Ask whether any holder, adapter, calibration, alignment check or acceptance inspection is required and include the requested work in the quotation.

Which CR cassette and imaging plate format do I need?

Confirm the CR reader and cassette family before selecting a format. FUJIFILM identifies Type CC as an FCR PRIMA cassette and lists sizes that include 35 × 43 cm, 35 × 35 cm, 10 × 12 in, 8 × 10 in, 24 × 30 cm, 18 × 24 cm and 15 × 30 cm. The source also lists ST-VI imaging plates. Request the exact cassette and matching plate references for the size and reader you use.

Do not assume that two products with the same external dimensions are interchangeable. A cassette has a specific shell, handling and reader interface; an imaging plate has its own type and format. Check the manufacturer documents for the exact reader generation, cassette type, plate type and size. If your service uses different reader models, identify them separately and ask the manufacturer which cassette/plate combinations apply to each.

Consider how the department labels, stores, cleans, tracks and replaces cassettes and imaging plates, following manufacturer guidance. Ask for separate quote lines for cassette, plate, protective case, identification labels and any other requested accessory. If only a cassette shell or only a plate is needed, make that explicit so the quote does not omit the matching component or include an unrequested one.

How are grids and CR cassettes different from DR detector panels?

A DR flat-panel detector captures a digital image electronically. A CR reader instead processes an exposed imaging plate from a CR cassette. A grid is a separate X-ray accessory, whether used with a compatible CR or DR arrangement. These items differ in function, interface and supported workflow, even where their nominal image dimensions overlap.

This catalogue leaf contains the GE grid assembly and FUJIFILM Type CC cassette. It does not list a DR detector panel or a complete CR reader. Browse the separate DR detector panel category or computed radiography system category for those equipment types. Review the manufacturer documentation for your exact system before considering an upgrade or replacement.

Avoid trying to replace a CR cassette with a DR panel based only on size. A DR conversion may involve detector mechanics, generator integration, acquisition software, image transfer, system-specific calibration and site acceptance. The equipment manufacturer or authorized engineering partner must specify the complete compatible solution.

What details should I send for a compatibility review?

For a grid, send the radiography system manufacturer and model, system serial number, detector and holder references, current grid part number and revision, grid ratio or focal detail if labeled, and photos of labels and mounting interfaces. For a cassette, send the CR reader manufacturer, model and generation; cassette type; exact size; matching imaging plate type and size; and whether you need the shell, plate or a set. State quantity and whether the part is a replacement or expansion.

Include the facility city and state, requested delivery address, contact person and access requirements. Explain whether the current system is operational, whether an engineer can confirm measurements, and whether installation, inspection or handover is requested. Do not send patient information or clinical images unless they are specifically needed and approved through the facility's privacy procedures; part labels and equipment identifiers are usually the relevant evidence.

Ask for the supplier's answer in writing and retain the compatible part number, revision and source documentation with the purchase record. Where fit is uncertain, request technical confirmation from GE HealthCare or FUJIFILM through an authorized support channel before placing the order.

What should an X-ray grid or cassette quotation include in Nigeria?

Request the exact manufacturer name, part number, revision, description, quantity and package contents. For GE 5731040, ask whether the item is new, refurbished or used, and confirm the specific system and holder compatibility. For FUJIFILM Type CC, state the cassette size and whether the matching ST-VI plate is included. Ask for applicable product documents, handling instructions, warranty and return terms for the supply route.

If you need service, request a separate line for technical compatibility review, site inspection, fitting, alignment or acceptance checks. State the system location, city and state, equipment status and requested service date. Do not assume installation or service is part of an accessory price. Confirm any lead time, delivery, import or handling charges, currency, quote validity, payment terms and warranty in writing.

Share the hospital or clinic destination and receiving access, including loading location, floor, lift or stairs, receiving hours and a contact. Ask Franance to list what is included, what is excluded and what information is still needed before order confirmation. No stock, price, warranty, distribution authorization or local service promise is implied by the product pages.

How do I place a grid or cassette quote order?

Open the GE HealthCare 5731040 filtered listing or the FUJIFILM Type CC filtered listing, or submit an X-ray accessory quote request. Include the device identity, part references, quantity and delivery destination.

Franance will follow up by phone or email to clarify the selected item, compatibility evidence, supply condition and commercial terms. This is a quote-order process, not online checkout. Before accepting an offer, check that the part number, revision, component role, system compatibility, package contents, installation scope and delivery terms match your specification. Resolve any substitutions with written manufacturer or supplier confirmation.

Manufacturer sources and compatibility limits

Review the GE HealthCare Service Shop listing for FlashPad grid assembly 5731040 for its 6:1 ratio, model associations and equivalent item. FUJIFILM's FCR PRIMA brochure identifies the Type CC cassette, ST-VI imaging plate, listed formats and FCR PRIMA components. Siemens Healthineers' X-ray grid information describes grids as system-matched components with variations in size, ratio and source-image distance. The FDA 510(k) summary for a CR system describes the CR cassette and imaging plate workflow.

Manufacturer specifications and compatible-product lists can change. Check the current documentation and the installed device details before purchasing. This guide is procurement information only; it does not set an imaging protocol, select clinical technique, or confirm the fit of a part to an unverified system.