Buy Tourniquet Systems in Nigeria.

Which surgical tourniquet system should I buy in Nigeria?

The right system depends on your operating-room workflow and the exact cuffs and procedures the clinical team has approved. If a theatre needs two independent channels, review a dual-channel system such as the listed VBM TT20 or Zimmer Biomet A.T.S. 5000 and confirm the port functions in the current instructions. If the workflow needs one channel, compare the listed Delfi PTSii single configuration and the quoted cuff package. Do not infer that one channel is enough for every case or that a dual-channel instrument is always required; the clinical service defines its use.

Ask the quotation to name the system model and reference, number and type of channels, included hoses, cuff compatibility, cuff references and sizes, trolley or mounting kit, power supply or battery, training, maintenance and warranty terms. Request the documents for the exact model. Confirm whether cuffs are reusable, sterile single-use or limited-reuse products, and how they are ordered. Franance can review your specification and follow up by phone or email with the quotation details that can be confirmed for your Nigerian facility.

What is included in a surgical tourniquet system?

A complete configuration may include the pressure-control instrument, cuff hose or hoses, one or more tourniquet cuffs, a power supply or battery, a stand or mounting hardware, and accessories for the selected workflow. Manufacturer product pages show that packages can vary substantially. Zimmer Biomet lists A.T.S. 5000 configurations with hoses, cuffs, poles or rolling stands; Delfi lists PTSii single and twin configurations with different included equipment; VBM separates its TT20 dual cuff-channel system from the TT15 arrangement with a cuff and irrigation channel.

Do not assume that a catalogue card includes every accessory shown in product photography or that a cuff is supplied with the console. Ask for an itemised bill of materials and check every line against the quotation: device, cables, hose connectors, cuffs, stand, basket, mounting kit, batteries, charger, software or documentation. If the theatre already owns cuffs or hoses, provide the exact product references and ask the manufacturer or supplier to confirm compatibility before reusing them.

Compare the listed tourniquet systems

The models below are present in the Franance catalogue. The table summarises manufacturer-published configuration facts; it is not a clinical recommendation or a promise that a particular package is available.

| Listed model | Configuration points to verify |
| --- | --- |
| VBM Tourniquet Touch TT20 | VBM describes TT20 with two cuff channels and options for a single cuff, two single cuffs or a double cuff. Confirm the offered reference, hoses, cuff package, power accessories and service/inspection requirements. |
| Zimmer Biomet A.T.S. 5000 | Zimmer Biomet describes a dual-port automatic system with personalised protocols, LOP-related features and cuff options. Confirm exact ports, compatible cuff references, included hoses, accessories and software or configuration requirements. |
| Delfi PTSii single system | Delfi lists a single-channel portable instrument configuration and separate cuff-set options. Confirm whether cuffs are included, which connectors and hose are supplied, the required cuff range and the mounting or transport accessories. |

Model names and configurations are not interchangeable. For example, VBM's TT15 is described with a cuff channel and a separate irrigation channel, while TT20 has two cuff channels; an irrigation channel is not a second tourniquet cuff channel. Zimmer Biomet's A.T.S. 3200 is a separate single-port system and should not be substituted for the listed A.T.S. 5000 without review. Delfi PTSii can be supplied in single or twin arrangements, so specify the exact version being quoted.

How do I select cuffs, hoses and connectors?

The cuff is a core part of the system, not a generic accessory. Identify the types and limb-size coverage that your service requires, then confirm each cuff reference, recommended circumference range, width, construction, connector and compatibility in the current manufacturer's materials. A cuff designed for one model or connector should not be treated as compatible with another because its name or size appears similar.

Ask whether the quote includes sterile single-use cuffs, reusable cuffs, sleeves or protective accessories, and whether the proposed instrument accepts the selected cuff type. Some manufacturers describe dedicated cuff portfolios or barcode-recognition features; verify the precise cuff product code and function for the offered instrument. Include any additional cuff sizes or replacement quantities your inventory plan requires. Do not assume that a set of cuffs shown on a product page is part of the quoted package.

Check hose length and routing against the operating-room layout. Confirm whether single or dual hoses, colour-coded hoses, extension hoses, adaptors or a mount are needed. Ensure any connection is approved for that device and cuff. Ask for a compatibility confirmation if you want to retain accessories from existing equipment. The quotation should list adapters and connectors explicitly rather than describing them as generic “hoses.”

What do pressure measurement and safety features mean?

Manufacturers describe different pressure-management functions, system checks and alarms. VBM lists fast-choice controls, timer alerts, self-test and leak-test functions for its Tourniquet Touch line, with a TT20 safety lockout feature described for IVRA use. Zimmer Biomet describes features on its A.T.S. 5000 including user protocols and LOP-related functions. Delfi describes pressure limits and integrated cuff-testing features for PTSii. These descriptions are model-specific and do not establish clinical outcomes or remove the need to follow the current instructions for use.

Have the clinical team determine which functions matter to its approved workflow, and have biomedical or clinical engineering review the service and test requirements. Do not use a marketing summary to select pressure, duration, safety margins or other patient settings. These decisions are outside this buying guide and must be made by qualified staff under the applicable device instructions, institutional policy and clinical judgment. Request the exact current IFU for every proposed model and accessory.

How many channels does the operating theatre need?

Specify whether the service needs a single cuff channel, two independent cuff channels, or a particular cuff-plus-irrigation configuration. The number of ports, their purpose and the available functions vary by model. A dual cuff-channel instrument may support distinct workflows from a single-channel system, while an irrigation port serves a different purpose. Ask the supplier to state what each port does on the exact model and which required accessories attach to it.

If the theatre requires two simultaneous channels or a twin arrangement, ask whether the instrument is one integrated dual-channel system or two separate units that can be mounted together. Confirm whether the channels are independently controlled and what hoses, power supplies, batteries and mounting pieces are included. If a single channel is enough for the intended service, confirm that the selected package includes the cuff and accessories needed for the approved workflow. Record the answer in the procurement specification to avoid a port-count mismatch at delivery.

What power, stand and room setup should I plan?

Check the manufacturer's installation and operating documents for the offered model's power input, battery, charging method, dimensions, weight and mounting options. VBM publishes model-specific information for Tourniquet Touch, including a battery and mains input; do not apply those details to a different model. The correct configuration may use a tabletop setup, trolley, basket, pole mount or portable case depending on the product and clinical workflow.

Give the supplier the actual theatre configuration and transport requirements. Ask whether a stand or mount is included, whether the device can be moved between rooms, where hoses and cables will be stored, and whether the power supply suits the intended site. Confirm any commissioning, inspection, setup or orientation scope in writing. A product brochure does not confirm that a room is ready or that installation is included in a quotation.

What service, inspection and documentation should I request?

Ask the manufacturer or supplier to identify the inspection, calibration, self-test, leak-test and maintenance requirements for the exact device. VBM states that its Tourniquet Touch has regular inspection and calibration-related maintenance steps; use the current instructions and manufacturer confirmation for the exact TT20 revision rather than applying a generic annual schedule to every brand. Confirm who can perform the required work in Nigeria, where it is performed, what it costs, and whether travel, parts or loan equipment are included.

Request the current IFU, product specification, compatible-cuff list, cleaning instructions, electrical-safety information and service checklist. Ask for the applicable warranty and support terms, service contact and any training that is included. Confirm which regulatory and procurement documents are available for the proposed supply route. A regional product page or service contact does not prove Nigerian registration, local warranty or in-country support.

What does a surgical tourniquet system cost in Nigeria?

There is no single reliable price for every surgical tourniquet system. A quote changes with the model, single or dual channel, included cuffs, hose configuration, trolley or mounting kit, power accessories, training and service scope. Request an itemised quotation from Franance for the exact model and accessories your facility needs. Include quantity, delivery city, theatre setup and any required service or training so the response can address those details. If a starting price is shown on a product listing, confirm that it applies to the quoted configuration.

How do I request a quote from Franance?

Send your facility name and delivery location, quantity, preferred manufacturer or model, required channel arrangement, cuff types and sizes, any accessories you need, and the support or training scope. Include the exact references of compatible existing cuffs or hoses if they will be reused. Ask that any proposed alternative be identified by model and reviewed against your technical requirements before approval.

Franance can use your request to prepare and follow up on a quotation by phone or email. Sending an enquiry is not an online purchase and does not confirm stock, local availability, delivery date, clinical suitability or final price. Browse the tourniquet systems above or contact Franance with the specification for your Nigerian operating theatre.

Frequently asked questions

### Is a dual-channel tourniquet system always better?

No. The required channel arrangement depends on the procedures and workflow approved by the clinical service. Compare the exact port functions and configuration rather than choosing a model only because it has more channels.

### Can I use any cuff with any tourniquet instrument?

No. Confirm cuff connector, size range, construction and model compatibility in current manufacturer documentation. Ask for written confirmation before pairing existing cuffs or hoses with a different instrument.

### Does the quote include cuffs and a trolley?

It depends on the exact package. Ask Franance to itemise each cuff reference and quantity, hose, stand or trolley, mounting kit, power accessory and other option in the quotation.

### Can Franance arrange a tourniquet-system quotation for Lagos, Abuja or another city?

Yes. State the facility and actual delivery city or address, quantity, model, cuff requirements and support scope. Franance will follow up to confirm the available quotation and delivery terms for that request.