Buy IV Stand in Nigeria.

Where can I buy an IV stand in Nigeria?

You can request IV stands in Nigeria through Franance’s IV stand category. The category currently has two GPC Medical models: GHF50.05, the double-hook stand, and GHF51.01, the four-hook stand. The manufacturer publishes product descriptions for both; the quote should identify the exact model and any requested configuration.

Send Franance the model code, quantity, facility type, ward or room, intended workflow and delivery location. If you are still comparing, state the number of containers or lines the stand must support and the height, base and movement requirements your facility has approved. A quote request lets the team clarify the proposed equipment and commercial terms. A catalogue listing does not confirm local stock, the final price, shipping schedule or a specific service arrangement.

Which IV stands does Franance list?

The current category assigns two distinct models. GPC Medical describes GHF50.05 as a saline or IV stand with a double hook. Its manufacturer page lists height adjustment from 137 to 244 cm, a tubular stand mounted on a rectangular pipe with five 5 cm castors, and a double hook adjusted with a bakelite knob. The page describes a PU base, stainless-steel inner rod and metal outer pipe. It also lists related GHF50.051 and GHF50.052 base configurations; those suffixes are not the same catalogue record as GHF50.05, so ask the quote to state exactly which model and base are offered.

GPC Medical describes GHF51.01 as a four-hook saline or IV stand. Its page lists the same 137–244 cm adjustment range, a tubular stand mounted on rectangular pipes, five 5 cm castors, and four hooks adjusted with a bakelite knob. It describes a five-wheel PU base with a stainless-steel inner rod and metal outer pipe, and lists GHF51.011 and GHF51.012 as separate mild-steel-base and stainless-steel-base configurations. Do not assume either suffix variant is supplied under the GHF51.01 catalogue record unless the written quote identifies it.

These are manufacturer specifications, not confirmation of the model or configuration offered for a particular Nigerian enquiry. Check the current product documentation and quote before approving a purchase.

What is the difference between a double-hook and four-hook IV stand?

The direct difference in Franance’s listings is the number of hooks: GHF50.05 is a double-hook model; GHF51.01 is a four-hook model. GPC’s published model descriptions give both a 137–244 cm height range and five 5 cm castors. Choose between them from the facility’s documented requirement, not from an assumption that more hooks mean a higher safe load or that every hook can carry a separate container at the same time.

Ask the manufacturer or supplier for the rated capacity of the complete stand and the limits for each hook, together with the conditions under which those ratings apply. The reviewed product descriptions do not state a safe working load. Hook count alone does not establish load, spacing, compatibility with a particular container, or suitability for a clinical procedure. Have the department’s clinical and biomedical engineering staff determine the acceptable arrangement and confirm it against the current instructions for the exact stand.

Both listed models use an adjustment knob in the manufacturer description. Confirm the adjustment mechanism, operating steps and locking method with the supplied instructions, and check that staff can position and secure it as required. If a specific pole height or multi-container layout is required, write that into the enquiry so the proposed model can be checked before an order is agreed.

How should I choose the IV stand height and hook configuration?

Start with the intended care area and equipment arrangement. Record the height range the staff need, where the stand will be positioned, how it will be moved, and which approved containers or accessories must be supported. GPC lists 137–244 cm for both models, but the usable working height depends on the exact pole, hook geometry, attached container and surrounding equipment. Confirm that the quoted model’s current range meets the facility’s written requirement; do not infer suitability from the range alone.

Decide whether two or four hooks are actually needed. Specify how many approved containers must be suspended, their intended positions, and any need to keep them separated. Ask for the hook form, spacing and rated load per hook and for the stand overall. If you require a branded hook, container holder, pole clamp or another attachment, identify the exact part and compatibility in the quote rather than assuming that an accessory fits because the stand is described as an IV pole.

The stand is a support structure. It is not an infusion pump, flow controller, administration set or clinical protocol. It does not establish a prescribed fluid, route, rate or treatment. Keep these equipment roles separate when building a procurement schedule; for pump requirements, specify the pump and compatible supplies as their own line items and seek the responsible team’s review.

What should I check about the IV stand base and castors?

Ask the quotation to identify the base and materials for the exact model. The GHF50.05 and GHF51.01 pages each describe a PU base, stainless-steel inner rod and metal outer pipe, while also identifying model suffixes for other base arrangements. The GHF50.05 page names GHF50.051 and GHF50.052; the GHF51.01 page names GHF51.011 and GHF51.012. Do not transfer a material option from one model family to another or assume that a suffix configuration is included in the base model.

GPC lists five castors of 5 cm diameter for each model. The page does not provide the stand’s base footprint, castor brake arrangement, turning clearance, floor suitability or load rating. Request current drawings and ask the supplier to confirm these details for the proposed configuration. Measure doorways, bed and chair clearance, wall outlets, room corners and the route where the stand will be moved or parked. Check whether the base can approach the intended patient area without crossing a prohibited route or obstructing access.

For a multi-ward order, do not assume a five-castor configuration is identical across variants or that each supplied stand will have the same base. Put the exact model code, base material, castor details and quantity on the schedule. Have facility staff assess floor transitions, braking expectations, stability and storage location before selection.

Will a mobile IV stand fit my ward, clinic or treatment room?

Confirm room fit using the supplier’s current dimensional drawing rather than a product photograph. The reviewed GPC pages specify height and castor diameter, but do not state overall footprint or a complete deployed envelope. Ask for the base dimensions, pole maximum height, hook reach and any protrusions in the exact offered configuration. Compare these against the bed, recliner or treatment chair, wall-mounted services, nearby equipment, door swing and the path staff use to move the stand.

Consider both the parked position and the way the stand is moved. A base that fits in an empty room may still interfere with a bed wheel, patient transfer route, cleaning access or doorway when equipment is in use. Record the doorway and corridor clearances and any thresholds or lift constraints relevant to delivery and internal movement. The facility’s layout owner should check those measurements and approve the proposed placement.

For a clinic or day-procedure room, state whether the stand remains in one room or moves between rooms. For an inpatient ward, specify the expected storage location and any constraints around the bed. Do not use this guide to make clinical placement or treatment decisions; those remain with the qualified staff responsible for the facility’s procedures and equipment.

How do I plan cleaning, inspection and maintenance?

Request the manufacturer’s current operating, cleaning and maintenance instructions for the exact model and material variant. The product listings mention PU, steel and stainless steel components, but those material names do not establish compatibility with every detergent, disinfectant, concentration, contact time or cleaning method used by a facility. Have infection-prevention or environmental-services personnel compare the supplied instructions with local policy before the stand is put into service.

Ask which parts can be wiped or disassembled, how the adjustment mechanism and hooks are checked, and what inspection or maintenance tasks the manufacturer requires. Establish who records checks, what parts are replaceable and how castors, base joints, pole locks and hooks are assessed. These are items to verify against the actual instructions, not a substitute for them. Do not add a maintenance interval or cleaning chemical to the specification unless it is supported by the supplied documentation and facility policy.

If the purchase will standardize several wards, request the documentation set for the selected model and base configuration and retain it with the equipment inventory. This helps the receiving team identify the accepted model and gives maintenance staff a reference for later inspection, replacement-part and replenishment enquiries.

What documents and specifications should I request?

WHO says technical specifications should be considered before medical-device purchase or donation and explains that specifications support planning for implementation, functioning and decommissioning. Its user guide notes that technical specifications can inform tendering, procurement and purchasing and maintenance planning. Apply that procurement discipline to the actual IV-stand requirement by writing down measurable, model-specific criteria before comparing quotes.

For an IV stand, ask the supplier to provide current manufacturer literature or drawings that identify the exact model, hook configuration, adjustment range, base material, castors, dimensions, load limits and accessories. Request the applicable instructions for use, assembly, cleaning and maintenance. Ask the quote to list included and optional components separately and to state whether a particular variant or suffix is being offered. If the published page leaves a field unspecified, mark it as unverified until the manufacturer or supplier confirms it in writing.

Review the documents with the department, biomedical engineering or facilities team and the procurement owner. They can compare the stated requirements and the actual offer, identify gaps, and record any approved deviation. WHO’s resources support specification-led purchasing; they do not certify either GPC model or establish that a particular quotation is approved for use in a Nigerian facility.

What affects the price of an IV stand in Nigeria?

The final price depends on the exact model and configuration, quantity, delivery location and commercial terms of the quote. Hook arrangement, a requested base variant, spare parts, included accessories, freight, delivery, assembly and other project requirements may affect the proposed total. The available product records do not show a verified current selling price, and manufacturer listings do not establish the price Franance will quote in Nigeria.

Ask Franance to itemize the exact manufacturer and model, selected base or suffix, quantity, unit price, freight, taxes or other charges, availability, delivery estimate, assembly and any included or excluded accessories. If comparing suppliers, compare the same model and confirmed configuration, shipping destination and service scope; a low headline figure may represent a different product or omit delivery. Do not treat a displayed catalogue item or image as a firm offer.

What should a Nigerian IV stand quotation request include?

Send Franance the exact model, GHF50.05 or GHF51.01, required hook count, any requested variant or base material, quantity and facility’s delivery state and city. Include the ward or room, intended workflow, required height range, load and attachment requirements, approved cleaning approach, expected movement and any room or delivery-route constraints. Where the facility has an equipment schedule, attach the relevant line items and quantities by location.

Ask the written quotation to state the offered manufacturer and exact model code, base configuration, included accessories, current price, availability, freight and delivery terms, estimated lead time, warranty applicability, maintenance documents, assembly responsibilities and any local support that is actually included. Ask for the current technical drawing and instructions when needed to confirm room fit and operational review. Make exclusions and open specifications visible so the buyer can resolve them before approval.

Franance can review the requested model and follow up by phone or email to clarify the quote order. A request is not an online purchase or a confirmation of stock, final price or delivery. Contact Franance for an IV stand quotation with your product list, quantities and destination.

Can IV stands be delivered to Lagos, Abuja or another Nigerian location?

You can include any Nigerian state and city as the destination on the quotation request. Franance must confirm the actual delivery availability, route, charges, timing and handover terms for that specific order; the category or manufacturer listing does not prove nationwide stock or a guaranteed delivery schedule. Provide the facility’s full address and a contact person, plus receiving hours and access details such as stairs, lift availability, loading arrangements, door width and final-room delivery needs.

For multiple facilities, send a separate quantity and delivery address for each location. Ask whether the quoted service covers only site delivery or also unloading, assembly and placement. Confirm who is responsible for inspection and acceptance at handover. These details allow the written offer to address the real destination without implying that a fixed national service level applies to every state or city.

How do I request an IV stand quote from Franance?

Open the IV stand listing, select the model that matches your requirement, and submit a quote order with the quantity and delivery details. If the needed configuration is uncertain, include the question and the specifications that must be verified. Franance’s process is a quotation enquiry: the team follows up by phone or email, and no online payment or purchase is completed from the listing.

To keep the request easy to review, use one line per model and variant. Separate the GHF50.05 double-hook stand from the GHF51.01 four-hook stand and identify any requested suffix configuration explicitly. Attach the room schedule or dimensional drawing when the equipment must fit a particular layout. Ask the supplier to identify any point that remains unconfirmed instead of interpreting a product photo or family description as proof.