Buy Manual Hospital Bed in Nigeria.

Which manual hospital beds can I request in Nigeria?

Franance’s manual hospital bed category lists two GPC Medical models. The GHF20.02 filtered listing is a plain fixed-height bed. GPC describes a rectangular or square mild-steel tube frame, rigid mesh mattress platform, laminated bed-end panels, an IV-rod provision and knock-down construction. Its published overall dimensions are 2000 × 900 × 500 mm. The manufacturer also lists a related GHF20.021 version with 10 cm castors, two with brakes; the catalogue entry is GHF20.02, so confirm whether the castor variant is included rather than assuming it.

The GHF27.04 filtered listing is a four-section Fowler bed. GPC specifies two independent cranks for backrest and leg-section adjustment, a perforated mild-steel platform, ABS head and foot panels, collapsible aluminium railings and four swivelling castors, two with brakes. Its listed size is 1970 × 910 × 600 mm. A four-section mattress and stainless-steel telescopic IV rod are described as optional, not established as included.

These details are from the manufacturer’s GHF20.02 page and GHF27.04 page. Ask Franance to identify the exact model and each included component in the quotation.

What is a manual hospital bed?

A manual hospital bed is a patient-care bed whose specified adjustments are operated mechanically rather than by an electric drive. The exact functions depend on the model: the GHF20.02 is listed as a plain, fixed-height bed, while GHF27.04 has separately hand-cranked backrest and leg-section adjustment. “Manual” does not tell you whether a bed includes height adjustment, Trendelenburg positioning, side rails, mattress, IV pole or transport features; check the model’s documented configuration.

Start with the care tasks and the room. Identify who will use the bed, what repositioning is required, how staff will perform routine care, whether a patient needs assisted transfers, and what space is available around the bed. A bed’s function should be assessed against institutional protocols and the patient’s individual needs by qualified clinical and facilities staff. This buying guide does not provide clinical advice or claim that one model is suitable for a particular patient.

For procurement, distinguish the bed frame and platform from mattress, rails, IV pole, castors, bumpers and other accessories. The GPC pages specify selected features and optional items, but the Franance category records do not make every accessory inclusion explicit. Put required items and quantities on the request and ask the written offer to name what is included and excluded.

How do the GHF20.02 and GHF27.04 differ?

The GHF20.02 is the simpler fixed-height plain-bed option. GPC lists a rigid mesh mattress platform, laminated end panels, IV-rod fixing provisions, a coated mild-steel structure and knock-down construction. It is not described on the cited page as a crank-adjustable Fowler bed. A buyer who needs backrest or leg-section positioning should not assume the plain model provides it.

GHF27.04 is the adjustable Fowler model. GPC specifies four bed sections and two independent cranks, allowing separate backrest and leg-section adjustment. It also has ABS head and foot panels, collapsible aluminium railings and four swivelling 12.5 cm castors, two with brakes. The page lists the mattress and stainless-steel telescopic IV rod as optional. Confirm the precise rail arrangement, mattress, pole, castor and other accessory choices in the quoted bill of materials.

The published dimensions are also different: GHF20.02 is 2000 × 900 × 500 mm and GHF27.04 is 1970 × 910 × 600 mm. Confirm which dimension is overall length, width and height in the latest drawing, along with mattress-platform measurements and assembled clearance. Do not treat a manufacturer web listing as a substitute for a project drawing or a dimensional site check.

What bed adjustments and safety features should I specify?

Describe the positions and adjustments the care workflow actually requires. State whether fixed height is acceptable or whether staff need manual backrest, leg-section, knee-break, height or other movement. The currently listed GHF27.04 specifies manual backrest and leg-section adjustment using separate cranks; it does not establish electric height adjustment or every positioning function. The GHF20.02 is listed as a plain bed. If other functions are essential, request a different precisely identified model and confirm its specifications rather than treating a related product family as equivalent.

Ask for documentation on the bed’s safe working load, intended environment, user instructions, adjustment limits, moving and braking, rail compatibility, pinch or entrapment risks and inspection points for the exact offered configuration. The current cited product pages do not provide a complete verified safety specification for the two Franance records. Do not invent a safe working load or infer a safety approval from a general manufacturer statement. Obtain current technical documents and have the hospital’s clinical engineering, nursing and facilities teams review them against the intended use and applicable requirements.

Include how the bed will be moved, positioned and cleaned. Confirm locking behavior and castor type, clearances around the bed, access for care, compatibility of mattress and rails, surface-cleaning instructions, maintenance and replacement-part availability. Keep patient assessment and decisions about rail use with qualified care staff using the institution’s policy and risk assessment.

How should I choose dimensions, mattress and accessories?

Measure the actual room and access route, including door openings, corridors, lifts, turning space and the intended bed position. Compare those measurements with the fully assembled bed and any projections from rails, handles, crank mechanisms, castors and accessories. Ask GPC or the supplier for a dimensioned drawing of the exact offered model, and confirm whether listed measurements refer to the overall frame or another reference point.

Specify the mattress separately unless the quotation explicitly identifies it as included. Confirm mattress length, width, thickness, construction, cover, cleaning compatibility and fit with the bed platform and selected rails. For GHF27.04, GPC identifies a four-section mattress as optional; that option is not confirmation that the mattress meets a particular clinical or pressure-care requirement. Have the clinical team define the mattress specification and check fit against the selected bed.

List every required accessory by name, quantity and preferred reference: IV rod, rails, mattress, castors or brakes, bumpers, patient-care attachments and any spare components. The GHF20.02 page mentions IV-rod fixing provisions, and the GHF27.04 page mentions provision at four locations; a provision or fixing point does not prove that the IV rod itself is supplied. Ask the supplier to show each included component on the quotation and state its material and configuration where relevant.

What should a Nigerian hospital check before ordering?

Hospitals should review the bed against the intended ward or service, patient population, staff workflow, facility policies and maintenance capability. Confirm whether the requested functions can be operated safely by the intended staff, whether the accessories fit the care model, and what procedures govern transfers, brakes, rails and routine inspection. Clinical teams own patient suitability; biomedical engineering or the responsible technical group should review the product documentation and maintenance needs.

Check the room, route and receiving plan before committing to a model. Record the installation floor, doorway and lift dimensions, turning constraints, destination department, receiving hours, offloading needs, protective packaging and responsible contact. If the bed is delivered knocked down, clarify who assembles it, what tools are required, whether installation is quoted, and what acceptance check the hospital will perform. GPC describes both selected bed models as knock-down construction; the actual delivery and assembly scope still needs written confirmation.

For multiple beds, state the quantity by model and location, the required rollout sequence and any common accessories. Ask whether the quotation applies one configuration to all units or differentiates by ward. Include the actual state and city in Nigeria so delivery charges, route access and timing can be confirmed for that destination. No particular inventory, delivery schedule or local assembly service is promised by this category page.

What documents and support should I request?

Request the current manufacturer datasheet, instructions for use, dimensioned drawing, bill of materials, assembly instructions, cleaning guidance, maintenance schedule and any applicable declarations or test documents for the exact model and variant. Ask what documentation is available for the unit being quoted and avoid accepting a family brochure if it does not identify the precise configuration.

Clarify warranty period and scope, exclusions, parts coverage, labour, response arrangements, preventive maintenance and the route for technical support. Request these commercial terms in writing. Neither the manufacturer’s general page nor a Franance product card establishes a Nigeria-specific warranty, authorised service network or local spare-parts stock. The final supplier offer should state what is actually available and who is responsible.

Before accepting the quotation, compare the model reference and every option against the approved equipment specification. Resolve differences in dimensions, rails, mattress, IV pole, castors, finish and assembly. Record any substitutions and require written approval from the hospital’s designated clinical and technical reviewers. Do not approve a substitute on the basis that it is also called a manual hospital bed.

What should a manual hospital bed quotation include?

Send Franance the model or functional requirement, quantity, facility type, ward or room, delivery address in Nigeria, access measurements, requested mattress and accessories, assembly needs and desired delivery schedule. If you are comparing GHF20.02 and GHF27.04, state whether manual section adjustment, collapsible rails, castors or other features are required. Attach a schedule or drawing where the bed must fit a particular room or furniture plan.

Ask the written offer to identify manufacturer and exact model, bed dimensions, platform construction, adjustment functions, rail and castor specification, mattress inclusion, IV rod and other accessories, assembly or installation scope, documents, warranty, condition, availability, freight, delivery, price validity and exclusions. Ask the supplier to resolve the GHF20.02 / GHF20.021 castor distinction and the optional mattress and IV rod for GHF27.04. A starting price, if shown for another configuration, is not the final project price.

Franance handles these as quote orders. A request records what you want priced; it does not make a confirmed online purchase, guarantee availability or accept a substitution. Review the final quote with procurement, clinical engineering and the intended care department before confirming the order.

How do I request a manual hospital bed quote from Franance?

Browse the manual hospital bed category, select the GHF20.02 or GHF27.04 record, and submit a manual hospital bed quotation request. Include the quantities, required functions, accessories, destination and site-access details. For several facilities, list each location and its required configuration separately.

Franance will follow up by phone or email to clarify the request and prepare a quotation. The site does not take payment for the bed online. Ask for the complete model and commercial terms in writing, then confirm that the proposed configuration matches the hospital’s approved requirement before accepting the offer.

What is verified about the listed manual hospital beds?

The live Franance category currently assigns two GPC Medical products. GPC’s GHF20.02 page describes the plain bed, rigid mesh platform, laminated bed ends, fixing provision for an IV rod, knock-down structure, and 2000 × 900 × 500 mm size. It separately names GHF20.021 as a castor version with two brakes. GPC’s GHF27.04 page describes a four-section bed with two independent cranks, ABS panels, collapsible aluminium railings and four 12.5 cm swivel castors, two with brakes; it lists 1970 × 910 × 600 mm and calls mattress and IV rod optional.

The cited pages do not confirm the exact Nigeria offer, current price, stock, delivery date, final materials, safe working load, local service, warranty or which optional items Franance will quote. Confirm current technical and commercial details with the supplier. Do not infer patient suitability, regulatory approval or compliance from these category assignments or the manufacturer’s general product wording.