Buy Fully Electric Hospital Bed in Nigeria.

Which fully electric hospital beds can I request in Nigeria?

The current category assigns two Stryker products. Review the ProCuity LEX / ZX filtered listing and the 7100 SV1 filtered listing. Each query returns its own assigned catalogue record. The fully electric hospital bed category is the parent listing for both.

The available catalogue is narrow: both entries are Stryker models and neither listing establishes the full range of beds available from every manufacturer. It is a starting point for a specific request, not an exhaustive market survey. The ProCuity record groups LEX and ZX, two named versions; the 7100 SV1 is listed under its own model identity. If neither suits your specification, state the requirement and ask Franance whether another sourced configuration can be quoted rather than treating an unlisted model as already available.

“Fully electric” is a category label, not a complete configuration. Ask which movements are motorized, what controls are provided, what the exact bed revision is, and which accessories, support surface and system interfaces are included. Compare the written configuration and manufacturer evidence rather than a product-family image or headline.

Buy Stryker ProCuity LEX or ZX fully electric bed in Nigeria

Stryker describes ProCuity LEX and ZX as smart, connected MedSurg hospital bed systems. Its product page distinguishes the two: LEX is listed with an 11.5-inch low height and electric brakes; ZX is listed with a 14-inch low height, electric brakes and Zoom Motorized Drive. The same page lists LEX dimensions of 90.25 inches retracted and 104.25 inches extended, and ZX dimensions of 93 inches retracted and 107 inches extended; each is 42 inches wide. It gives a patient surface of 84 by 35 inches without the extension and 96 by 35 inches with it. Confirm all dimensions and options against the current model and regional document used for the offered unit.

The Franance catalogue record combines LEX and ZX. A buyer must not treat that record as a single interchangeable model. Tell the supplier whether the request is for LEX, ZX or a side-by-side quote, and ask the written offer to name the exact version and product number. If the decision depends on low height, transport assistance, brake operation, nurse-call interface, bed scale or bed-exit functions, require a line-by-line response for the precise model and market configuration.

Stryker’s product page presents features such as a bed scale, adaptive bed alarm, iBed Watch, auxiliary outlets, battery backup, bed extender, nurse-call interface, wireless capability and three-position siderails. The listed feature set is useful for preparing questions, but the exact record and offered configuration still need confirmation. Do not assume a software, wireless, nurse-call or accessory option is installed just because it appears on a family page. See the ProCuity LEX / ZX category and model listing.

Buy Stryker 7100 SV1 electric hospital bed in Nigeria

Stryker’s TechWeb identifies 7100 SV1 Electric Hospital Bed, REF 7100, and provides an international operations manual and maintenance documentation. The maintenance manual lists safe working load as 230 kg, defined as the total of patient, mattress and accessories, and maximum patient weight as 215 kg. It gives an overall length of 2,200 mm, or 2,510 mm with optional bed extender, and width of 990 mm. These numbers describe different limits and dimensions; do not present the safe working load as a patient-only rating.

For an enquiry, request the exact 7100 SV1 model and revision, plus the current manuals that apply. Confirm whether the bed extender is included or optional and which mattress and accessories the proposed version supports. The category record identifies the bed as electric but does not specify every option in a supplied unit. Its technical page also links mattress resources, which does not mean that any mattress of similar size is approved for use.

Ask which movements and controls are present in the exact offered model. Have Stryker or the quoting supplier identify the controls, any lockout functions, electrical supply, battery arrangement and component part numbers from the applicable documentation. The Stryker 7100 SV1 filtered listing returns the specific catalogue record; use that exact model name in a quote request.

How do I choose between ProCuity and 7100 SV1?

Start by listing the required environment, bed functions and constraints instead of choosing by brand or broad category. For ProCuity, the LEX/ZX distinction is material: Stryker’s published page gives different low-height values and describes Zoom Motorized Drive for ZX. The catalogue does not separate those versions into independent product records, so the quote must resolve which one is offered. For the 7100 SV1, ask for the REF 7100 documentation, current configuration, dimensions, load definitions and bed-extender status.

Build a comparison table with the exact model; bed height range; overall and patient-surface dimensions; patient weight and total safe working load; mattress and rail compatibility; powered movements; brakes; extension; bed scale or alarm requirements; power and backup; nurse-call or network interfaces; and service documentation. Put “confirmed by manufacturer,” “optional,” “excluded” or “needs confirmation” beside every line. Do not copy specifications across models simply because both are Stryker beds.

Check the purpose of the bed against the facility’s own clinical and engineering requirements. Manufacturer claims about fall prevention, workflow or monitoring should not be treated as guaranteed outcomes for an individual facility. Ask what configuration supports the stated feature, what prerequisites apply and what evidence or training is provided. Have clinical engineering, nursing, facilities, procurement and IT review the specifications relevant to their responsibilities.

Which mattress, support surface and accessories should be quoted?

Specify the mattress or support surface by manufacturer and model, not only by nominal dimensions. Ask for written confirmation that it is approved for the exact bed version and rail arrangement. Check whether an extension requires a matching mattress extension and whether the requested surface changes the delivered bed height or other fit. Stryker provides support-surface information for ProCuity and a mattress resource for the 7100 SV1, but these references do not select the right surface for a particular project.

List the requested rails, bed extender, handset or controls, battery, scale, pump holder, nurse-call components and other accessories as separate quote lines. Confirm which are included, optional or excluded, and ask for part numbers, compatible model identifiers and installation instructions. If electrical outlets, wired connections, wireless functions or communication interfaces are required, ask which regional configuration supports them and what facility infrastructure or licenses are needed.

The buyer’s team should review the combination of bed, mattress, rails and accessories against the relevant instructions and facility policy. Dimensions alone do not establish compatibility or safety. Keep the model-specific compatibility statement and current manuals with the procurement file and equipment handover documents.

What room, electrical and network requirements matter in Nigeria?

Before ordering, measure the route from receiving to the final bed space: doors, corridor turns, lift door and car, thresholds, ramps and floor access. Use the assembled overall dimensions for the chosen version, including the bed extender where applicable. Allow room for staff to work, for transfer devices to approach, and for cleaning and maintenance. Ask for packed dimensions, weight, assembly requirements and any specified service clearances.

Request the nameplate and installation information for the actual bed being offered: voltage, frequency, current, plug, protective earth, cord length and battery or backup arrangement. Have the facility electrical team compare those requirements with the intended outlet and backup supply. Product-family pages are not proof that a particular region-specific unit has the correct configuration for a Nigerian site.

If the project needs nurse-call, wireless monitoring or other integrations, provide the exact installed system model and version to the supplier. Ask for the compatible interface, required cabling or components, network prerequisites, licensing, responsibilities for testing and acceptance, and any cybersecurity review materials. A connected-bed feature does not establish compatibility with an unlisted hospital system. Keep those integrations separately scoped from the bed hardware until the project team has written confirmation.

How should a Nigerian facility plan delivery and installation?

Include the destination state and city, facility name, receiving contact, delivery hours, unloading arrangements and route to each ward. Identify lift limits, stairs, restricted areas, security procedures and whether the bed must be taken beyond central receiving. For multiple beds, provide quantities by building or ward and flag any different configurations. Ask for shipping dimensions and packed weight so the facility can plan handling equipment and staff.

Ask the quotation to separate freight and delivery, unpacking, assembly, placement, electrical checks, commissioning or acceptance, user training, packaging removal and follow-up service. Those terms are not automatically included in a product listing. Request written responsibilities for each task and any documentation delivered at handover. For network-connected options, name the hospital IT and nurse-call contacts who will take part in a compatibility review.

Franance has not represented the listed bed as in stock or promised a delivery date, local installation, warranty or service response. Request the actual commercial and service terms for the proposed Nigerian order and confirm the exclusions before approval. If timing is critical, ask for the supplier’s current written estimate rather than inferring timing from manufacturer pages.

What should I include in a fully electric bed quotation request?

Send the exact catalogue model and version, quantity, intended department, delivery destination, required mattress, rail and accessory list, extension requirement, electrical details, any nurse-call or network interfaces, room measurements, access route and requested installation or training scope. For ProCuity, explicitly request LEX, ZX or a comparison; for 7100 SV1, specify REF 7100 and ask for confirmation of the revision and extender option.

Ask Franance to provide an itemized written quotation naming the exact manufacturer model and configuration, included and optional parts, compatible mattress and accessories, current dimensions and load documentation, electrical requirements, delivery and installation scope, warranty terms applicable to the Nigerian purchase and service arrangements or exclusions. Request model-specific manuals, part numbers and compatibility evidence for any required integration. Ask the seller to identify anything awaiting manufacturer confirmation instead of treating it as included.

Use the fully electric hospital bed category listing to review the two assigned records and send requirements through the Franance fully electric hospital-bed quotation form. Franance follows up by phone or email with a quote order. There is no online checkout or payment on the product catalogue.

What is verified about this category and its limits?

The live taxonomy assigns two records to this category, both from Stryker: ProCuity LEX / ZX and 7100 SV1. Stryker’s ProCuity LEX / ZX product page supports the published distinction between versions, dimensions and selected listed features. Stryker’s 7100 SV1 TechWeb page identifies the bed and links the operations manual and maintenance documentation. The maintenance manual is the source for the load and dimension figures stated above.

The catalogue does not settle which ProCuity version or regional configuration will be offered, the exact 7100 SV1 revision, supplied mattress, rails, extender, controls, accessories, site electrical compatibility, integration requirements or commercial terms. Confirm these points with current manufacturer documents and the written offer. This guide does not claim Nigerian stock, price, delivery time, registration, warranty coverage, local service availability or clinical outcomes.