Buy Armedica AM-BA400 Bar Activated Traction Table
in Nigeria.

Where can I request an AM-BA400 quotation in Nigeria?

Use the Armedica AM-BA400 listing filtered to traction tables, browse the traction-table category, or send Franance an AM-BA400 quotation enquiry. The product record is specifically the bar-activated four-section AM-BA400; do not confuse it with the standard AM-400, AM-BA450 or other Armedica traction-table models.

Include quantity, destination city and state, intended clinical use, operator access, room dimensions, required base and caster arrangement, upholstery and frame colours, accessories and any required services. If you need a traction machine, state its exact model and request separate confirmation that the mounting arrangement is compatible. The AM-BA400 table record does not mean a traction device is included.

Armedica's U.S. product page and product sheet do not prove stock in Nigeria, price, delivery date, electrical suitability, local warranty, service coverage or import status. Ask Franance to confirm current supply and commercial terms in the quotation. A catalogue enquiry is not an online purchase or payment.

What is the Armedica AM-BA400?

Armedica identifies the AM-BA400 as a bar-activated traction table with a four-section top. The manufacturer says the bar control permits height adjustment from around the table. This is a particular configuration within Armedica's traction-table line. It differs from standard models that use a single foot control and from other variants with different section layouts or controls. Verify AM-BA400 in the quotation and on the delivered product label.

Armedica lists top dimensions of 27 inches wide by 76 inches long, an adjustable height of 18–37 inches, an overall length of 99 inches and a 500 lb load capacity. It describes the top as four sections, 34 oz heavy-duty vinyl upholstery with Permablok 3 bacterial protection, 1.5-inch high-density foam and rounded corners. The page specifies head-section angle adjustment from +45 to -90 degrees and lower-extremity adjustment from 0 to 80 degrees. Treat these as manufacturer specifications and confirm the current sheet for the exact offered model.

The manufacturer's listed standard base is white powder coat. The page offers upholstery colours including Imperial Blue, Blue Ridge, Forest, Black, Burgundy, Dove, Cappuccino, Taupe, Greystone and Patina, with custom base colour options including Black, Metallic Silver and Steel Gray. Colour choices are options, not proof of local stock; include the requested finish and ask the supplier to confirm availability, any upcharge and lead time.

What is the bar-activated height control?

Armedica describes the AM-BA400's dual foot-bar control as a way to adjust height from anywhere around the table. That is a height-control feature. It should not be described as electric treatment traction or as a control for a separate traction machine. If the clinical plan requires a traction unit, identify that unit and its control requirements separately, then ask the supplier to confirm the complete table-and-device setup.

The manufacturer page lists the AM-BA400's top sections and angle ranges but the site should still be prepared for the actual footprint and control access. Confirm that operators can reach and use the control from the positions required in the treatment room. Request the current instructions for operation and a drawing that shows the table in its fully extended configuration. The 99-inch overall length is a key room-planning figure; a traction unit or accessories may increase the occupied space.

Have the clinical lead review table positioning and suitability for the intended users and treatments. The product page's mobility claims do not determine whether a particular patient can safely transfer to, lie on or be treated on the table. Staff should follow Armedica's instructions for positioning, section adjustment, load limits, routine inspection and cleaning.

Which AM-BA400 options should I specify?

State whether you need the standard AM-BA400 four-section table or a clearly identified optional configuration. Armedica lists an AM-T1024 option that adds a base with four total-lock swivel casters and an AM-91 option for one-inch extra-soft foam. It lists SPCO for a special vinyl colour supplied by the customer and SPBASE for a selected custom base colour. Request the exact option code and associated price and lead time. Do not assume that any option is included in the base model.

Specify upholstery and base colour. Armedica's page presents a list of standard upholstery choices and white as the standard base colour. It also lists black, metallic silver and steel gray as custom base colours. Ask for the actual code, sample or written description for the selected colour; a web swatch can differ from the delivered finish. If the facility needs a particular disinfectant-compatible surface or documented material standard, specify it and ask the manufacturer to confirm suitability for the site's cleaning protocol. Do not infer compatibility from the phrase “bacterial protection.”

Confirm base and caster choice in relation to flooring and room layout. The AM-T1024 option specifies four total-lock swivel casters; if casters are chosen, ask how the locks operate and whether the intended floor and positioning meet the manufacturer's instructions. If selecting the standard base, ask what is included and how the table is moved, positioned and secured. Room mobility requirements do not replace clinical and facility safety review.

A traction machine, harnesses, controls and accessories should be listed separately unless a written quote explicitly packages them. The product page is for the table. If the facility requires a traction system, name the exact device and required mounting interface, then ask Armedica or its channel to confirm compatibility and the complete system in writing. Do not rely on the category label or photo as evidence that a machine is included.

What do the dimensions and capacity mean for facility planning?

The top is listed as 27 by 76 inches and the overall length as 99 inches. Plan around the larger overall measurement and request a current drawing showing section extension, control access, caster footprint and any traction-board or device projection. Measure treatment-room access doors, corridors, lifts and the intended operating space. The table must be accessible for staff and the user, with enough room to use controls and follow the intended transfer and treatment workflow.

Armedica lists a 500 lb load capacity. This figure is a manufacturer rating and not an individual treatment recommendation. Confirm the meaning of the rating in current documentation and account for accessories and manufacturer rules. A clinician should determine whether the table is suitable for the patient and treatment plan. Do not use the capacity number to infer stability on every floor, during every position or with an unapproved accessory.

The 18–37 inch height range and section angles are useful comparison values but do not by themselves establish safe transfer height, accessibility or clinical fit. The therapist and facility team should consider the person's mobility, transfer method, caregiver support, pressure-care needs and surrounding equipment. Ask for a demonstration or documented orientation if your team needs to learn adjustment and safety procedures.

What should I confirm about power and installation in Nigeria?

The Armedica product page lists height-control features but does not state voltage, frequency, current or plug configuration for the AM-BA400. Ask Franance to obtain the exact electrical specification and approved regional configuration for the unit being offered. Do not assume that a North American page, local plug adapter or general equipment listing proves compatibility with Nigerian mains. Have a qualified facility engineer confirm input requirements, grounding, protection, site wiring and any approved transformer or conversion equipment before installation.

Ask who will position and assemble the table, verify control operation, inspect the frame and foot control, and provide the manual and user orientation. The public manufacturer page does not establish that any such service is included in a Nigerian quotation. Request that the quotation state installation, electrical checks, acceptance testing, training, maintenance and travel costs separately. If the unit is intended for a clinic or hospital, involve procurement, clinical engineering, facilities and the therapy lead before sign-off.

Confirm room access, final footprint, floor requirements, delivery packaging and the receiving route. Ask for packed dimensions and shipment weight, not just the assembled table dimensions. Clarify which party handles freight, insurance, import documentation, customs clearance, unloading and movement into the treatment room. These terms affect actual readiness and should be resolved before dispatch.

What should Franance's quote include?

Provide the exact model AM-BA400, quantity, destination city and state, selected upholstery and base colour, caster or standard-base requirement, foam choice, requested accessories, electrical site requirements and intended installation scope. Include expected treatment-room dimensions and any required companion traction equipment. If the quote is for multiple rooms, list each destination and configuration separately so the equipment and services can be itemized correctly.

Ask the written quote to state whether the offered item is new, its model and manufacturer, dimensions, height range, capacity, included controls and accessories, finish, price and currency, quote validity, availability, estimated lead time and delivery terms. Request separate lines for options such as AM-T1024 casters or AM-91 extra-soft foam. Have the quote state freight, insurance, import responsibilities, customs and delivery to the actual destination. Ask for manufacturer-approved power information and confirm local electrical readiness before approval.

Request written terms for warranty applicability in Nigeria, service contact, spare parts and repair arrangements. The official product page and warranty link do not guarantee that a U.S. warranty applies to a unit shipped to Nigeria. Ask whether delivery includes setup or training and name the person responsible. Franance can follow up by phone or email to clarify the order and issue a quotation; the catalogue does not take online payment.

Frequently asked questions

### Does the AM-BA400 include a traction machine?

The reviewed Armedica page identifies and describes the table. It does not list a traction machine as included. Ask for any required machine as a separate, explicitly named item and confirm compatibility in writing.

### What are the table's key dimensions?

Armedica lists a 27 by 76 inch top, 18–37 inch height range and 99-inch overall length. Ask for a current drawing and verify the full operating footprint, including any device or accessory.

### Is the dual bar control the same as traction control?

No. Armedica describes it as height adjustment. A separate traction machine and its operating controls must be identified and quoted separately if needed.

### Can I connect the table to a Nigerian outlet?

Do not assume so from the product page. Obtain the exact offered unit's electrical requirements and written approval for local power from the supplier; have the facility engineer verify the site before installation.

### How do I order through Franance?

Use the AM-BA400 brand-filtered listing or send Franance the enquiry. Franance follows up by phone or email. The order is quotation-based, not online checkout.

Manufacturer sources and scope

This guide uses Armedica's AM-BA400 product page and traction tables product sheet. The product page is the source for the listed dimensions, options and table features. It does not establish Nigeria supply, electrical compatibility, price, delivery, warranty or local service. Confirm the exact model, configuration, current documentation and all commercial and installation terms with Franance and the facility team before ordering.