Buy Systec laboratory sterilization equipment in Nigeria.
Browse Systec laboratory steam autoclaves listed by Franance. Match the model and loading format to the laboratory’s intended sterilization cycles, utilities and available space, then request a quotation with the required accessories.
The Systec clinical-laboratory records cover DX-40 and DE-65 laboratory autoclaves. Review their respective product details and identify the model and loading arrangement that fits the laboratory’s approved process.
This Systec family includes the DX-40 Laboratory Autoclave and DE-65 Laboratory Autoclave. Review the model records for their stated form and identify which equipment and load configuration your laboratory specifies.
Provide the model reference, load dimensions and type, required cycle parameters, baskets or accessories, utility and space details, quantity and location. Request a quotation that states the selected autoclave configuration.
Franance lists the Systec DX-40 and DE-65 laboratory autoclaves in this category. Compare the individual model records and state the loading arrangement and sterilization process required by your laboratory.
Include the exact model, intended load and container dimensions, cycle requirements, loading accessories, utilities and available space, quantity and destination. Ask Franance to confirm the selected configuration in the quotation.
Provide the exact model, intended load and cycle requirements, chamber or loading accessories, utilities, site dimensions, quantity and destination. Ask Franance to confirm the quoted equipment configuration and site information needed.
Systec autoclaves listed in this category include the DX-40 and vertical VX-75 research laboratory models. Compare the product records by loading format and specify the laboratory load and cycle requirements.
Systec models in this category are the DX-40 Laboratory Autoclave and VX-75 Vertical Laboratory Autoclave. Compare the specific product details and loading format against the laboratory’s research sterilization requirements.
Specify the DX-40 or VX-75, load and cycle requirements, loading accessories, utilities, available floor or bench space, quantity and destination. Ask Franance to list the requested configuration and required site information in its quotation.
Name the required model, sample or instrument load, cycle and documentation needs, baskets or other accessories, utility requirements, quantity and site. Request an itemised quotation and confirm the equipment configuration before ordering.
The Systec product listed in this department is the vertical VX-75 laboratory autoclave. Use its product record to identify the model, then review the intended load, laboratory cycle and installation requirements.
The Systec product assigned to this family is the VX-75 vertical steam autoclave. Review its model details and specify the load, cycle and laboratory installation conditions needed for the request.
Send the VX-75 model reference, intended load, cycle and documentation requirements, accessories, utilities, room dimensions, quantity and delivery location. Request confirmation of the quoted equipment and configuration.
The Systec VX-75 Vertical Laboratory Autoclave is the listed model in this range. Review the product record and match its loading format and documented configuration to the laboratory’s specified process.
State the VX-75 reference, load type and dimensions, cycle requirements, accessories, steam, water and electrical provisions, room clearance, quantity and location. Request an itemised quotation with the confirmed model configuration.
Send the VX-75 reference, load type, cycle requirements, loading accessories, available utilities, room dimensions, quantity and destination. Ask Franance to confirm the proposed configuration and site details in the quotation.
Buy Systec laboratory autoclaves in Nigeria from Franance.
Buy Systec laboratory autoclaves in Nigeria through Franance. The current catalogue includes the horizontal benchtop DX-40, the DE-65 E-CONOMIC tabletop autoclave and the vertical floor-standing VX-75. Browse the Systec-filtered listings above, compare the model family and usable chamber dimensions with your laboratory's loads, then request a quotation. Franance will follow up by phone or email about the model, utilities, process records, accessories, delivery and any project services you want considered. This guide explains how to build an enquiry around laboratory workflow rather than capacity alone.
Where can I buy Systec laboratory autoclaves in Nigeria?
Request a quotation from Franance for the Systec model listed in the relevant brand-filtered range. Current Franance references are Systec DX-40 and DE-65 horizontal laboratory autoclaves, plus the VX-75 vertical laboratory autoclave. The DX and DE models are assigned to the laboratory autoclave category; the DX-40 and DE-65 also appear in the research autoclave range, while VX-75 appears in the vertical steam autoclave range.
The products are presented for quote enquiries, not online checkout. Send the exact model, quantity, load types, required cycles, delivery destination and intended installation site. Include your laboratory specification, tender schedule or process requirements if one is available. Franance can then contact you to clarify the request and prepare an offer for the equipment and scope discussed. The current page shows only selected catalogue references; Systec manufactures a broader range, but unlisted models should be sent as enquiries and confirmed before they are represented as available.
Which Systec autoclave types are listed in Nigeria?
The catalogue includes horizontal benchtop and vertical floor-standing laboratory autoclaves. DX-40 is from the Systec DX horizontal tabletop family. DE-65 is from the DE E-CONOMIC horizontal tabletop family. VX-75 is from the vertical floor-standing VX family. This distinction is useful when planning installation and handling: vessel orientation, loading access, usable dimensions and required site space differ by equipment type.
Start by matching the sterilizer to the contents and workflow rather than choosing by nominal litres alone. Identify whether you process solid instruments, waste, media, bottles, liquids or another load, and describe the container dimensions and batch volume. Then compare usable vessel dimensions and rack or basket requirements. If a room has height, width, doorway, drain or service constraints, provide the relevant site details. A category label is a way to browse products; it does not confirm that the model suits your validated process.
Use the Systec-only filtered links above to see the models currently assigned to each range. If your laboratory needs another DX, DE, VX or different series reference, tell Franance the model and specification you are considering. We will discuss it as a separate enquiry instead of implying it appears in the listed inventory.
How do I choose between the Systec DX, DE and VX autoclave families?
Choose the family based on its intended workflow, chamber geometry, controls, options and available installation space. Systec calls the DX Series its X-PERT horizontal tabletop family, the DE Series its E-CONOMIC horizontal tabletop family, and the VX Series its X-PERT vertical floor-standing family. The manufacturer describes different standard features and options across those families, so a model in one line should not be treated as equivalent to another simply because their capacity figures seem close.
For a comparison, list the load type and size, batches per day, program requirements, drying or cooling needs, record retention, accessories, operator workflow and room constraints. Identify whether liquids need controlled exhaust or natural cooling, and whether a printer, software or data export is needed. Ask which options are part of the model currently being quoted. A family brochure can explain available configurations, but the written quote should identify the selected options and exact model.
Laboratory management and biosafety or quality personnel should review the proposed process and any validation requirements. Systec product literature describes possible programs and optional documentation features; their presence in the family range does not establish they are installed on a particular ordered unit. Franance can review your stated requirements with you, while the facility remains responsible for approving the process and operating instructions.
What should I know before buying a Systec DX-40 in Nigeria?
The listed Systec DX-40 is a horizontal benchtop laboratory autoclave. The current product record identifies 40 litres nominal capacity, 45 litres total usable space and usable chamber dimensions of 320 mm diameter by 500 mm depth. These values should be considered alongside the load envelope and accessories; a nominal-volume figure alone does not establish how many of your containers or baskets fit.
Before requesting a quotation, measure the actual vessel, tray, rack and package dimensions. Describe the load type, number of items per cycle, required programs and the acceptable turnaround. State if the setup needs controlled cooling, drying, a printer or other documentation accessories. Confirm bench or floor stand, clearance, service access, drainage and the position of the loading surface. Your facility's electrical supply must be checked against the chosen unit variant and current Systec data sheet; the product family may have model-specific power requirements.
Use the DX-40 category listing for other matching laboratory autoclave references and the model query to isolate this unit. Ask Franance to make the offered model, accessories, installation assumptions and delivery terms explicit. If the required load exceeds the usable dimensions or documented cycle scope, the model should not be selected on brand preference alone. The laboratory should approve the chamber and process against its operating procedure before purchase.
Is the Systec DE-65 suitable for my laboratory?
Systec DE-65 is listed as a horizontal tabletop laboratory autoclave in the manufacturer's DE E-CONOMIC series. The manufacturer lists 70 litres total usable space and 65 litres nominal capacity, with usable chamber dimensions of 400 mm diameter by 500 mm depth. It identifies up to 12 sterilization programs in the DE family and describes configurations for solids, waste and liquids, with different cooling and exhaust behaviour depending on the program. Confirm the current operating documentation for the specific unit and chosen cycle.
The DE-65 electrical requirement is a critical project check: Systec states DE-65 to DE-200 units use 380–400 V, 50/60 Hz, 16 A in the published DE-series description, while country-specific deviations may occur. Do not assume a standard single-phase laboratory outlet will be sufficient. Ask your electrical engineer to verify the exact offered voltage and phase against the site's available supply. Include breaker, cable, earthing and installation planning where required by the project team.
Provide the batch contents, bottle dimensions, liquid volume, required program, cycle record, cooling expectation and loading accessories in your enquiry. Compare the chamber with the largest load and total batch plan. If the laboratory needs a printer, software or cycle-data retention, specify it. Franance can discuss the listed reference and requirements; final electrical fit, process suitability and validation must be approved by your responsible technical team.
When should I consider the Systec VX-75 vertical autoclave?
The Franance VX-75 listing is a vertical floor-standing Systec laboratory autoclave. Systec lists 85 litres total usable space and 75 litres nominal capacity for the VX-75, with usable chamber dimensions of 400 mm diameter by 600 mm depth. Vertical loading may suit some container and room arrangements, but the vessel format does not by itself determine whether a load can be processed safely or efficiently.
Measure the height and diameter of the largest containers, racks and baskets, and allow for safe loading and unloading. Provide the intended floor position, operator access, door and route dimensions, clearance, drainage, water or steam requirements and the electrical supply. Identify required cycle programs, drying or cooling, batch records and any accessories. If the autoclave is planned for a shared laboratory or central sterilization area, explain the users, throughput and scheduling constraints.
Compare usable chamber dimensions with actual load plans rather than treating 75 litres as available in any arbitrary arrangement. Review the current Systec technical data and accessories list for the exact configuration. Ask Franance to itemise the offered unit and requested components. The lab manager, facilities engineer and biosafety or quality leads should agree on process, siting and utilities before the system is ordered or installed.
What loads and cycle details should I specify for a Systec autoclave?
Tell Franance what the autoclave must process. Solid reusable instruments, laboratory waste, media, liquids and mixed loads may require different programs, packaging, exhaust and cooling behaviour. Specify the container material, dimensions, cap or closure type, liquid volume, number per batch and whether a load includes bags, vessels or temperature-sensitive components. If the laboratory has a validated method, provide the process parameters and documentation requirements that the selected model must support.
Systec describes different program groups and optional process features across its model families. Do not infer a validated cycle from a program name or product family statement. Ask for the current operator manual, model-specific program list, available cycle recording and the documentation needed for installation qualification, operational qualification or routine quality review. State whether staff need batch identifiers, pressure and temperature records, printouts, software access or export to a local quality system.
The person responsible for sterilization should approve the intended load and cycle, including container suitability and load arrangement. A successful quotation is not process validation. Keep the selected cycle, accessories, service prerequisites and monitoring plan in the facility's procedures. When a load is unusually large or unusual in composition, describe it clearly before the model is selected so it can be assessed against the manufacturer's instructions.
What utilities and installation information does Franance need?
Laboratory autoclaves require site planning. Provide the room plan, equipment location, door and corridor access, bench or floor arrangement, service clearances, drainage and nearby utilities. Confirm the exact offered model's power supply with your electrical engineer; published Systec data shows requirements can differ by family and capacity. State the voltage, phase and frequency available at the site and whether electrical work is included in the project or handled by another contractor.
Describe water, steam, cooling, exhaust, ventilation and drain provisions relevant to your chosen model and cycles. Include the location and installation condition of any source equipment, network or computer if documentation software is specified, and the preferred operator and service-access side. If the site has water-quality, pressure, floor loading or environmental constraints, share them for technical review. Do not assume utilities from a similar autoclave installation will match the new equipment.
Ask the written quotation to distinguish equipment supply, delivery to the site, offloading, positioning, connection, start-up, commissioning, training and validation activities. These can involve different parties and are included only when clearly stated. Provide the state, city and facility name for logistics discussion. Before confirming the order, compare the site's prepared utilities and access route with the exact manufacturer's installation requirements.
What affects the price and delivery of a Systec laboratory autoclave in Nigeria?
The price depends on the exact family and model, options, chamber configuration, controls, documentation accessories, racks or baskets, quantity and requested project services. Shipping and delivery depend on equipment dimensions, destination and access, while installation and commissioning depend on the site and agreed scope. A model-only price will not necessarily include the accessories, utilities or training your laboratory wants.
Franance prepares a quotation after reviewing the requested model and requirements. Include the delivery destination, desired timing, quantity, installation location and requested technical services. Ask that the proposal state model, electrical variant, chamber details, accessories, delivery assumptions, exclusions, quotation validity, payment terms and warranty conditions. If the purchase is subject to a grant, tender or internal capital approval, include the required forms and submission deadlines.
The catalogue does not establish Nigerian stock, a fixed local price, distributor status, delivery date, warranty or service coverage for a specific Systec model. Confirm these items in writing for the proposed supply. Before order confirmation, ask your engineer and laboratory lead to approve the configuration and confirm that the facility can meet the model's utility and installation requirements.
How do I request a Systec autoclave quotation from Franance?
Select the DX-40, DE-65 or VX-75 range above and identify the reference you want quoted. Send the load schedule, vessel dimensions, required cycle types, batches per day, process record needs, preferred accessories and quantity. State the laboratory location, utilities, electrical supply, room access and whether the unit is for a new facility or a replacement. Attach drawings or tender specifications that establish requirements.
Separate must-have requirements from options. If installation, connection, commissioning, training, validation documentation or maintenance is needed, ask for each explicitly and identify the expected provider or responsibility. Provide the contact for the laboratory and facilities teams. Do not send patient-identifiable material; this request needs equipment and site data only.
Franance will contact you by phone or email to discuss the equipment and prepare a quotation for the agreed scope. Review the final offer against current Systec data, laboratory procedure, site utilities and procurement terms. Confirm the exact model, options, quantity, delivery destination and technical responsibilities before placing an order. This makes it easier for procurement and laboratory staff to evaluate the same configuration and avoid unplanned installation or documentation gaps.
Common questions
Can I buy Systec autoclaves online from Franance?
No. Franance handles quote orders and follows up by phone or email to confirm your requirements, quotation and supply terms.
What is the difference between Systec DX, DE and VX?
DX is the X-PERT horizontal tabletop family, DE is E-CONOMIC horizontal tabletop, and VX is the X-PERT vertical floor-standing family. Verify each exact model and configuration.
Does DE-65 work on a standard single-phase outlet?
Systec lists 380–400 V, 50/60 Hz, 16 A for DE-65 to DE-200 in its current series information. Confirm the exact offered variant and site supply with your electrical engineer.
Does nominal chamber capacity equal usable batch volume?
No. Compare total usable space and chamber dimensions with real containers, racks and load arrangements, and confirm the process with the manufacturer documentation.
Are installation and validation included in a quote?
Only when included in the written scope. State the installation, start-up, training and validation activities you want considered.
Can Franance deliver a Systec autoclave to my city?
Provide the state, city, site access and requested timing so delivery terms can be discussed and confirmed for your order.
Request a Systec laboratory autoclave quotation from Franance.
Send your model, load and cycle requirements, chamber dimensions, electrical and utility details, accessories, quantity, delivery destination and requested services. Franance will contact you by phone or email to discuss the quotation and terms.
