Buy Memmert laboratory incubators and temperature-control equipment
in Nigeria.

Where can I request a Memmert incubator in Nigeria?

Request a Memmert IN55 quotation from Franance using the brand-filtered laboratory-incubator listing. Identify the model, quantity, required temperature setpoints and tolerance, typical sample load, shelf needs, electrical configuration and city and state of the facility. Include any installation, documentation, training or service scope you want considered. Franance will contact you by phone or email to discuss the enquiry and proposed quotation. The listing is a quote-order route; it does not offer online checkout or guarantee current stock, price, lead time, warranty or local service.

What is the Memmert IN55 laboratory incubator?

Memmert identifies the IN55 as a natural-air-circulation incubator with a 53-litre chamber. The manufacturer lists a setting temperature range of +20 °C to +80 °C and a working range from at least 5 °C above ambient to +80 °C. The unit uses a SingleDISPLAY ControlCOCKPIT, includes a stainless-steel grid according to the current product information and provides an inner glass door behind an insulated outer door. Memmert describes the incubator I family for research, medicine, pharmaceutics, food analytics and food chemistry. Match the intended method to the exact product configuration rather than assuming that broad application labels guarantee protocol suitability.

Is the IN55 a natural-convection or forced-air incubator?

The listed IN55 is a natural-convection model. Memmert’s product family also contains forced-air models such as IF-series devices, but those have a different model designation and must not be assumed to be the product in this Franance listing. Natural convection may be appropriate for some applications where gentle heating and the specified circulation characteristics fit the protocol. If a method requires forced circulation, a particular recovery rate, defined air movement or a specified temperature uniformity under a particular load, check the manufacturer’s data for the exact model and ask for a configuration that meets the requirement.

The IN55 product information describes an adjustable air flap for preheated fresh-air admixture and a vent connection, but these functions do not convert it into a forced-air model. Describe the sample types, containers, number and placement of shelves, load mass, door-opening frequency and required uniformity. Ask the laboratory’s quality lead to assess the current model documentation and any qualification evidence required by the facility.

What laboratory work is the Memmert IN55 intended for?

Memmert positions the Incubator I range for general temperature-controlled applications in research, medicine, pharmaceuticals, food analytics and food chemistry. The IN55’s published temperature range extends to +80 °C, while the operating working range begins at least 5 °C above ambient. It can therefore be considered where a method requires incubated samples at temperatures within those limits and the natural-circulation performance suits the protocol. It is not possible to decide suitability from the product category alone: review the test method, loaded chamber performance, sample containers and required acceptance criteria.

Do not present the IN55 as a refrigerated device or as a controlled-CO₂ cell-culture incubator. Memmert lists separate cooled incubator and CO₂ incubator product families, each with distinct control and environmental functions. If a protocol requires temperatures below ambient, controlled carbon dioxide, humidity or other environmental conditions, assess the corresponding product category and exact specification. A standard incubator cannot be assumed to provide those features because a laboratory uses the word “incubator.”

What temperature range and control features should I confirm?

Memmert lists a +20 °C to +80 °C setting range and a working range from at least 5 °C above ambient to +80 °C for the IN55. Its current page also lists a setting accuracy of 0.1 °C, a Pt100 temperature sensor, a digital timer, calibration points and an electronic overtemperature monitor together with a mechanical temperature limiter. These are manufacturer-published characteristics, not a calibration result or a guarantee of performance in your facility. Ask for the current data sheet and confirm which details apply to the offered unit and regional version.

Before requesting a quote, write down the protocol’s operating setpoints, allowable variation, recovery requirements after loading and door opening, monitoring schedule and alarm expectations. Define the load and method used for any acceptance or qualification checks. If you need a particular documentation or software workflow, ask about the exact interface and accessories: the product page describes AtmoCONTROL software and Ethernet-related data management, but the supplied package and license scope must be confirmed. Do not assume a software accessory is included because it is mentioned in general product information.

How much capacity does the IN55 provide?

The IN55 has a nominal 53-litre chamber. Memmert lists internal dimensions of approximately 400 × 400 × 330 mm, a maximum of four internal shelves, a maximum chamber loading of 80 kg and up to 20 kg per internal shelf. The current page identifies one stainless-steel grid as standard equipment. These figures help with early planning but do not establish that every sample arrangement will achieve the required temperature profile. The load’s shape, density, packaging and spacing affect how it occupies the usable chamber.

Prepare a loading diagram for routine work. List container dimensions, number of shelves, sample spacing, total mass, clearance needed for air movement and frequency of loading and unloading. Compare these needs with the usable interior and load limits. If your work requires many small vials, large vessels, racks or a different shelf count, ask for a complete accessory schedule and confirm the maximum configuration. Keep a suitable margin in capacity rather than planning every run at the absolute limit.

What electrical and room requirements should a Nigerian laboratory check?

Memmert lists electrical options including 230 V, 50/60 Hz at approximately 1,000 W and 115 V, 50/60 Hz at approximately 900 W. Confirm which voltage version is offered, along with frequency, plug, protective earthing and any site electrical requirements. A Nigerian destination does not by itself confirm the model’s voltage, plug or electrical compatibility. Have facilities or biomedical engineering check the planned circuit and any voltage-stabilization or backup requirements before purchase.

The manufacturer also specifies ambient limits and installation clearances. Its current product page lists operation in an ambient temperature range of +5 °C to +40 °C and humidity up to 80% non-condensing, with minimum clearances around the appliance. Check ventilation, heat rejection, bench or floor support, door swing, access for maintenance and the room’s ability to maintain those environmental conditions. Confirm the packaged dimensions and safe movement route to the laboratory. Include building access and floor location in the quotation enquiry if delivery or installation is requested.

How should I compare the IN55 with other Memmert incubators?

Compare intended conditions first. The IN55 is a 53-litre natural-convection model. Memmert’s portfolio also includes different chamber sizes, forced-air models, CO₂ incubators, Peltier-cooled models and compressor-cooled systems. Those categories address different requirements and cannot be compared only by volume or brand. If you need a larger chamber, forced circulation, lower-than-ambient operation or controlled CO₂, describe that need and review the matching product family rather than assuming the IN55 can be configured to provide it.

Within the Incubator I range, compare chamber size, natural or forced convection, SingleDISPLAY or TwinDISPLAY controls, programming options, interior configuration, operating limits and installed electrical data. Confirm whether accessories such as additional shelves, perforated shelves, data interfaces, software or service packages are included in each quotation. A comparison should use like-for-like documentation, the same load assumptions and the same installation and commercial scope.

What should a Franance quotation for a Memmert IN55 include?

Ask the written quotation to identify the exact IN55 model, voltage version, included grid or other internals, additional shelves or accessories, software or communication options, price, currency, applicable taxes and quotation validity. Request clarity on payment terms, estimated lead time, delivery destination and who is responsible for unloading, installation and acceptance checks. If calibration, qualification, training or maintenance is required, have the scope, provider, cost and responsibilities stated separately. These items depend on the proposed transaction and are not guaranteed by the catalogue card.

Send Franance your intended application, temperature needs, load details, electrical information, quantity and location. Ask for the model documents that apply to the offered configuration and for any assumptions about room conditions or clearances. Franance takes quote orders and follows up by phone or email; there is no instant purchase price or online checkout. Review the written offer with laboratory management, procurement, facilities and quality staff before accepting it.

Can Franance deliver, install or service a Memmert incubator anywhere in Nigeria?

Provide the exact facility destination and ask what delivery scope can be quoted. The manufacturer sources reviewed here do not establish nationwide delivery availability, a local distributor relationship, installation coverage or service response in any Nigerian state. If you need site placement, commissioning, temperature mapping, calibration, maintenance or repair, ask who would perform the work, what geographic coverage applies, what is included and which charges and response times would be contractual. Confirm warranty terms and the responsible party in the written quote; no warranty or service entitlement is implied by the brand or listing.

What documentation should I review before ordering?

Request the latest IN55 product sheet, user manual, installation requirements, electrical specification, calibration information, accessory list and any conformity documents required by your institution. Confirm that the model and electrical version in the documents match the quotation. Have the laboratory quality function define whether installation qualification, operational qualification, performance qualification, temperature mapping or other evidence is necessary for the application. The manufacturer’s general data do not substitute for facility-specific qualification or method validation.

Check that service, calibration and maintenance responsibilities are clear before commissioning. Keep manuals, calibration certificates, acceptance records and service reports with the laboratory’s equipment file. Verify any data logging, network and computer requirements with IT and quality teams if the incubator will be connected to a workflow or monitoring system.

What mistakes should a buyer avoid?

Avoid treating every Memmert incubator as interchangeable. The IN55 is natural convection and has a specified temperature range; a cooled, CO₂-controlled or forced-air requirement may need another model. Do not confuse settable range with working range, overlook the ambient offset, ignore chamber clearances or assume that all displayed accessories are included. Avoid selecting by 53-litre volume alone if the actual sample load needs more shelf area or a different circulation pattern.

Do not assume a voltage version, Nigerian stock, delivery time, warranty, local service or software package. Confirm each item in writing. Give Franance enough detail to request a model-specific quotation and let the laboratory quality and facilities teams evaluate the offer against the intended method and site.

Request a Memmert IN55 quotation in Nigeria

Use the Memmert-filtered laboratory-incubator listing to request an IN55 quote order. State your application, setpoint and tolerance, expected load, shelves, electrical requirement, quantity, city and state, and any requested calibration, installation or service work. Franance will contact you by phone or email to clarify the request. Confirm the exact model, version, accessories, delivery, price and service terms in the written proposal before ordering.