Buy GPC Medical K-Nail Instrument Set KNI1501 in Nigeria
GPC Medical’s KNI1501 set lists a substantial instrument inventory, including a K-Nail reamer series from 7 to 13 mm and an aluminium graphic case. The component table also identifies a gauge, guide wire, extractor and driver. Use those references to verify the supplied set against the intended procurement schedule before arranging Nigerian delivery through Franance.
What is listed inside the KNI1501 set?
The manufacturer’s specification names KNI62 diamond-pointed awl, KNI76 two-hook extractor, KNI78 extra hook, KNI74 driver, KNI71 nail set, KNI75 slotted punch, KNI66 gauge, KNI77 guide wire and KNI73 K-Nail reamer. Ask for the full table in the quotation.
Which wire and reamer sizes are included?
GPC lists three 14-inch guide wires: 7/64 inch (2.7 mm), 5/32 inch (4.0 mm) and 3/16 inch (4.8 mm). The reamer series KNI73.07–KNI73.13 is shown at 7, 8, 9, 10, 11, 12 and 13 mm, quantity seven. Check each size and count against the delivered inventory.
Is the case part of the set contents?
Yes. The page lists AGC1501 Aluminium Graphic Case, quantity one. Ask the supplier to confirm the case reference and that the instruments are supplied as the specified KNI1501 set. If labeling or a foam layout matters, request a current case photograph or drawing as supporting documentation.
What should a buyer confirm about the KNI1501 inventory?
Request a component-by-component packing list, especially for the three guide wires and seven reamers, whose measurements appear in the specification. If the required nail-system reference differs from the product title, provide it for manufacturer clarification rather than assuming the set is suitable based on name alone.
How do I request KNI1501 in Nigeria?
Send model KNI1501, quantity, destination and any required component cross-check through the Franance quotation cart. Browse GPC Medical and surgical instruments. Ask for the full inventory, case, documented size ranges and delivery terms in writing.
Common questions
What is listed inside the KNI1501 set?
The [manufacturer’s specification](https://www.gpcmedical.com/1030/KNI1501/instrument-set-for-k-nail.html) names KNI62 diamond-pointed awl, KNI76 two-hook extractor, KNI78 extra hook, KNI74 driver, KNI71 nail set, KNI75 slotted punch, KNI66 gauge, KNI77 guide wire and KNI73 K-Nail reamer. Ask for the full table in the quotation.
Which wire and reamer sizes are included?
GPC lists three 14-inch guide wires: 7/64 inch (2.7 mm), 5/32 inch (4.0 mm) and 3/16 inch (4.8 mm). The reamer series KNI73.07–KNI73.13 is shown at 7, 8, 9, 10, 11, 12 and 13 mm, quantity seven. Check each size and count against the delivered inventory.
Is the case part of the set contents?
Yes. The page lists AGC1501 Aluminium Graphic Case, quantity one. Ask the supplier to confirm the case reference and that the instruments are supplied as the specified KNI1501 set. If labeling or a foam layout matters, request a current case photograph or drawing as supporting documentation.
What should a buyer confirm about the KNI1501 inventory?
Request a component-by-component packing list, especially for the three guide wires and seven reamers, whose measurements appear in the specification. If the required nail-system reference differs from the product title, provide it for manufacturer clarification rather than assuming the set is suitable based on name alone.
How do I request KNI1501 in Nigeria?
Send model KNI1501, quantity, destination and any required component cross-check through the [Franance quotation cart](/quote-order.html). Browse [GPC Medical](/brands/gpc-medical.html) and [surgical instruments](/products/category/anaesthesia-surgical/surgical-instruments.html). Ask for the full inventory, case, documented size ranges and delivery terms in writing.
Request your GPC Medical Instrument Set For K-Nail KNI1501 quotation from Franance.
Request model KNI1501, quantity and Nigerian destination from Franance. Ask the written quotation to identify the exact item, confirmed package and commercial terms.
Choose quantity