Buy Eppendorf Centrifuge 5702 in Nigeria
Buy the Eppendorf Centrifuge 5702 in Nigeria through Franance. Request the non-refrigerated model with the actual rotor, buckets, adapters and electrical version your laboratory requires. Send the approved vessel schedule, quantity and destination so the proposed instrument package can be quoted clearly. This page concerns Centrifuge 5702, not the refrigerated 5702 R or refrigerated and heated 5702 RH. Those related names describe different configurations. The manufacturer's reference image shows a rotor and tubes for illustration; the accepted quotation must identify the components actually included. Use the guide below to organise a purchase, while the laboratory retains responsibility for method suitability and approved operating instructions.
Where can I buy Eppendorf Centrifuge 5702 in Nigeria?
Request Centrifuge 5702 from Franance with the full model name, laboratory location, quantity and accessory requirement. Identify whether you need the instrument alone or a defined rotor package, and include any installation, orientation or verification work for review.
If you are replacing an installed centrifuge, send its identity and explain which existing components you want assessed for continued use. A new purchase should state the approved work requirement and vessel formats rather than copying an instrument description from an unrelated room. Shared branding does not establish rotor or adapter compatibility.
Franance can review one instrument or a multi-item equipment schedule. Keep mandatory criteria visible and indicate whether alternatives may be considered. The resulting proposal should preserve each centrifuge's full configuration so the laboratory and procurement reviewers compare the same scope. An enquiry for a generic Eppendorf centrifuge leaves important model, temperature-control and package questions unresolved.
Is Centrifuge 5702 the same as 5702 R or 5702 RH in Nigeria?
No. The reviewed manufacturer documentation distinguishes non-refrigerated 5702, refrigerated 5702 R and refrigerated/heated 5702 RH. Request the exact model your approved specification requires and have any proposed change assessed before acceptance.
The base 5702 does not gain active refrigeration because the family page also describes refrigerated models. Likewise, a family photograph or shared rotor option does not establish that all temperature-control features are included. If the laboratory needs a controlled-temperature instrument, identify that requirement explicitly rather than selecting the base model and assuming the function can be added later.
Retain the complete suffix on procurement documents, equipment schedules and any technical response. Ask the proposal to identify the actual ordering reference and electrical version. Where a tender uses a family description, have the responsible reviewer clarify the intended model before commercial comparison so a lower instrument amount is not mistaken for an equivalent temperature-control package.
| Family identity | Temperature-control distinction |
|---|---|
| 5702 | Non-refrigerated base model on this page |
| 5702 R | Separate refrigerated model |
| 5702 RH | Separate refrigerated/heated model |
| Accepted quotation | Retain complete model, ordering reference and included accessories |
What speed and capacity does Centrifuge 5702 offer in Nigeria?
The reviewed operating manual lists a rotational-speed range of 100–4,400 rpm and a maximum load arrangement of 4 × 100 mL. Actual vessel capacity and permitted centrifugal force depend on the selected rotor, buckets and adapters.
Rotational speed and relative centrifugal force describe different quantities. The manual's application table and the manufacturer's current family page also present maximum-force values in different contexts. For procurement, ask for the actual selected rotor and vessel arrangement to be documented against the laboratory's approved requirement instead of treating one headline maximum as a universal limit for every configuration.
A maximum volume arrangement does not establish how many of your particular tubes can be accommodated. Supply the vessel manufacturer's reference, dimensions and intended format for compatibility assessment. Have the offer identify the matching accessories and applicable documented limits. This guide does not provide a centrifugation protocol, run setting or clinical processing instruction; those depend on the authorised method and equipment documentation.
Which rotor package should I request for Centrifuge 5702 in Nigeria?
Ask Franance to identify the exact rotor, buckets, adapters and any required lids in the quotation. The manufacturer lists multiple rotor options and different instrument bundles; a bare model name does not define the supplied assembly.
The reviewed family page includes instrument-only and A-4-38 rotor-package references. Even within a rotor family, bucket and adapter arrangements can differ. Keep these components identifiable in the equipment schedule so the intended vessel configuration can be reviewed before approval. Do not assume that a displayed rotor or tube is supplied merely because it appears in the manufacturer's photograph.
If several vessel formats are required, list them separately and ask the laboratory to review each proposed arrangement. A complete response should make clear which components cover which formats and whether additional sets are needed. For existing accessories, provide exact identities and relevant history for assessment rather than treating an Eppendorf logo as proof that they can be transferred to the new instrument.
How should I specify tubes and adapters for Centrifuge 5702 in Nigeria?
Give the actual vessel references, dimensions, purchasing quantities and approved compatibility requirements. Tube volume alone is not enough to define a rotor and adapter package because vessel shape, closure and dimensions can change the required arrangement.
Ask the response to connect each proposed adapter or bucket configuration to the vessel schedule. Distinguish supplied accessories from spare sets and from consumable tubes. A package containing adapters does not automatically include ongoing tube supplies, and an initial tube allocation does not establish a recurring procurement agreement.
Where the institution requires a specific containment or accessory property, request supporting documentation for the actual combination. Do not infer aerosol-tight performance from a lid or from a family-level description. Have the responsible laboratory team assess the requirement using current manufacturer information. A defined component schedule is more useful for acceptance and later replacement enquiries than an incomplete phrase such as centrifuge with all accessories.
What electrical and site details matter for Centrifuge 5702 in Nigeria?
Request the actual electrical version and current site requirements for the offered ordering reference. The reviewed British catalogue includes 230 V, 50–60 Hz versions, but the final package and connection arrangement still need to be identified.
Provide the laboratory location, intended bench and access information. Ask facilities staff to assess the proposed position using the instrument's current documentation, including support, clearance and environmental requirements. The physical footprint alone does not define all space needed for access and safe use, and this guide does not provide installation instructions.
For a replacement, describe changes to the bench or room and identify any supporting equipment the institution intends to retain. For several units, use a separate allocation schedule for each destination. Keep site preparation distinct from equipment supply, and have any requested technical attendance itemised. That gives Franance a clearer basis for reviewing the actual work rather than assuming every room is ready for the same installation.
Is the reviewed 5702 intended-use documentation applicable in Nigeria?
Request the offered instrument's actual current intended-use and regulatory documentation for institutional review. The manufacturer page used for this record identifies EU-IVD catalogue versions; that is a source description, not evidence of Nigerian registration or approval.
The applicable manual describes the equipment role and trained-user context. Have the responsible laboratory and purchasing staff review those documents against the proposed instrument and institution's requirements. Regional commercial references can differ, so retain the ordering identity rather than using a general family brochure as the only acceptance record.
If your procurement process requires particular declarations, registration evidence or validation records, list them in the enquiry and request a response for the actual offered product. No such entitlement or local approval is created by a catalogue listing. Franance can receive the document requirement alongside the equipment schedule so the proposal makes clear what is supplied, available for review or still awaiting confirmation.
What is the Eppendorf Centrifuge 5702 price in Nigeria?
Request a current Centrifuge 5702 quotation from Franance with the complete component schedule. Instrument-only, rotor-bundle and additional-accessory proposals have different scopes and should not be compared as though they contain identical equipment.
State the number of instruments, required accessory sets and destination. Ask for equipment, transport and any requested technical work to remain identifiable, with optional lines separated from mandatory items. If the offer includes an alternative model, retain its actual identity and ask the laboratory to review the difference before commercial approval.
Use the quotation to confirm currency, validity, taxes, delivery responsibilities and applicable payment terms. Do not infer current Nigerian stock or a fixed lead time from a regional manufacturer's ordering page. The product page provides a researched reference for an enquiry; the accepted commercial response determines the proposed supply and responsibilities for your particular purchase.
What handover records should accompany Centrifuge 5702 in Nigeria?
Agree the expected instrument identity, component schedule, documents and any technical-work records before delivery. Receiving the centrifuge and completing the laboratory's acceptance process are related but distinct activities.
Match delivered rotor, bucket and adapter references to the accepted offer. Record any omitted or different components and have substitutions reviewed rather than accepted on visual similarity. The equipment file should make it possible to identify the actual supplied arrangement later, including when another accessory set or replacement component is requested.
If installation, familiarisation or verification support is required, ask for its scope and responsible parties to be specified. Have the laboratory define its professional acceptance requirements and retain current manufacturer instructions. This buying guide does not substitute for equipment training or authorise operation. It helps the commercial and technical teams keep delivery, supporting work and acceptance evidence aligned with the agreed purchasing schedule.
Can Franance arrange a Centrifuge 5702 enquiry for locations across Nigeria?
Send Franance your full address, receiving contact, instrument quantity and required delivery scope. Requests can identify facilities in Abuja, Lagos, Ibadan, Enugu or another Nigerian destination, with actual arrangements confirmed in the quotation.
If technical attendance is needed, distinguish it from transport and explain the expected work. Multi-site projects should identify which unit and accessory sets belong to each location. A shared model specification can coexist with different receiving arrangements, bench readiness and local contacts; keep those details visible instead of assuming one delivery description covers the whole project.
Ask for current availability and proposed responsibilities for the actual address. A national catalogue page does not establish a local office, guaranteed dispatch time or an included service visit. Accurate location information helps the team prepare a practical response and allows your institution to assess the complete delivery and handover scope alongside the equipment itself.
How do I prepare a complete Centrifuge 5702 order enquiry in Nigeria?
Send the full non-refrigerated 5702 identity, approved vessel requirement, rotor and adapter schedule, instrument quantities and laboratory destination to Franance. State the actual electrical version and any documents or technical work your institution requires.
Separate instrument components, consumables, spare accessory sets and services into clear lines. If your institution already has an approved ordering reference, preserve it and request confirmation of the proposed package. Mark any mandatory temperature-control requirement clearly so a base 5702 is not mistaken for the related R or RH versions.
Review the resulting quotation with the laboratory and procurement teams before agreement. Keep the accepted configuration available for delivery checks and later accessory enquiries. Franance can discuss the requested supply and follow-up details while the institution determines technical suitability and acceptance. A complete equipment schedule supports a clearer purchasing decision than a model name and headline price alone.
Common questions
Does Centrifuge 5702 include refrigeration?
No. The base 5702 is non-refrigerated. State a refrigerated or refrigerated/heated requirement explicitly and review the separate R or RH configuration.
Does the image establish which rotor and tubes are supplied?
No. Ask for the offered rotor, buckets, adapters, lids and any tubes to be identified in the actual quotation.
Request your Centrifuge 5702 quotation from Franance.
Request Eppendorf Centrifuge 5702 from Franance with the non-refrigerated identity, actual rotor and vessel arrangement, electrical version, quantities and laboratory destination in Nigeria.
Choose quantity