Buy Eppendorf BioBLU 3f Single-Use Bioreactor
in Nigeria.

Where can I buy Eppendorf BioBLU 3f in Nigeria?

Send a quote request to Franance for Eppendorf BioBLU 3f with the exact manufacturer catalogue reference 1386000900. Include your institution, fermentation laboratory or process-development group, quantity, procurement contact, delivery city and state, and any required purchase-document details. Identify the intended microbial process at a suitable level, such as bacteria, yeast or fungi, and tell the supplier whether the lab already has a compatible controller and autoclave.

Ask for a written quotation that separates the vessel from the controller, drive, modules, probes, adapters, pumps, gas equipment, cooling, exhaust treatment, software, installation and training. For this exact 3f reference, require written confirmation that it is supplied non-sterile and autoclavable, not presterilized. Ask the supplier to state any lot-specific documents or packaging information available and the current Eppendorf instructions relevant to the actual vessel. The facility must decide whether its autoclave and validated preparation procedure can accommodate the vessel materials and package; this product guide does not provide a sterilization protocol.

Franance processes quotation orders and follows up by phone or email. The product listing does not take online payment, reserve inventory, guarantee supply or confirm a delivery date. Ask the offer to state price, validity, taxes, shipping, delivery responsibilities, warranty and service scope for the Nigerian destination. A product page or regional distributor page does not establish those terms locally.

What is BioBLU 3f catalogue number 1386000900?

BioBLU 3f is Eppendorf's 3 L-class BioBLU f single-use fermentor for microbial research and development applications. Eppendorf describes the f-line for bacteria, yeasts and fungi and presents it as a rigid-wall stirred-tank format. The manufacturer lists the 3f working volume as 1.25–3.75 L, with 5 L total vessel volume in its family technical data. Working capacity and total vessel volume are distinct measurements; process staff should specify the operating volume and confirm the operating limits in the current product documentation.

The catalogue reference is essential because the BioBLU f family includes several sizes and package formats. Eppendorf lists 1386000900 as BioBLU 3f, macrosparger, three Rushton-type impellers, no pH, non-sterile, one piece. It is autoclavable and not supplied presterilized. Smaller 0.3f and 1f product references have different volumes and may be supplied sterile after irradiation; those descriptions do not apply to 3f catalogue 1386000900.

BioBLU 3f is a process vessel, not a finished process or an all-in-one control system. It needs an appropriate magnetic drive and controller, and the complete setup may require sensor hardware, gas supply, cooling, exhaust handling, pumps and accessories. Eppendorf's brochure cautions that the BioBLU single-use vessel has not been developed for medical diagnostics or therapy. Do not interpret a life-science instrument listing as authorization for clinical or therapeutic use.

Is BioBLU 3f supplied sterile?

No. Eppendorf identifies catalogue 1386000900 as non-sterile and states that BioBLU 3f is not presterilized. The manufacturer describes the vessel as autoclavable. This is a critical purchase and facility-planning difference from smaller BioBLU f products that Eppendorf lists as irradiated and delivered sterile. Do not infer supply sterility from the words “single-use” or “bioreactor,” and do not apply a smaller vessel's irradiation status to 3f.

Before ordering, ask Eppendorf for the current instructions for the 3f reference, permissible autoclave conditions, load or packaging requirements, material limits and handling steps. Have the facility's process, biosafety, quality and engineering teams confirm that their validated procedure applies to the exact supplied vessel. This guide does not prescribe a cycle, loading configuration, sterilization assurance level or aseptic handling method. The equipment offer should state non-sterile supply status plainly so purchasing and laboratory staff can plan preparation before use.

At receipt, request exact catalogue and lot identification and check the package against the quotation and current manufacturer documents. If a seller proposes a presterilized alternative, require its exact reference and evidence; that would be a different product or processing status and should not be described as 1386000900 without verification. Any substitution must be reviewed before purchase and before process planning.

What do the macrosparger and three Rushton-type impellers specify?

The reviewed BioBLU 3f configuration uses a macrosparger and three Rushton-type impellers. Eppendorf describes the f-line as stirred-tank vessels for microbial applications and identifies high-cell-density fermentation as a product-family use case. Those design descriptions are not a guarantee of a specific oxygen-transfer rate, mixing time, heat removal, cell density, productivity, yield, or culture outcome. Performance depends on the exact vessel, controller, operating range, process and facility configuration.

Ask the process engineer and Eppendorf to review the required gas flow, agitation range, heat-removal strategy, exhaust treatment, liquid additions, sampling and harvest requirements. Request the current vessel drawing, sparger and impeller information, recommended operating limits and controller compatibility statement. If process needs call for another impeller configuration, vessel size or sensor port, ask for a separate catalogue reference and document the difference. Do not accept an unsupported promise that a similar fermentor will meet a target process performance.

The 3f's three Rushton-type impellers distinguish it from the BioBLU 3c entry, which has a pitched-blade impeller and is configured for cell culture. The 3c is not a substitute for a 3f microbial vessel solely because the two share a working-volume range. Keep the product's culture role, impeller setup, pH configuration and preparation status tied to the exact catalogue reference.

What does “no pH” mean for the 3f configuration?

Eppendorf lists no pH for catalogue 1386000900. That describes the supplied 3f vessel option; it does not establish whether the wider process can or should run without pH measurement. If the process requires pH, ask the manufacturer whether the exact vessel has a compatible sensor port or configuration, what probe and adapter are supported, and what controller module and calibration equipment are required. Do not assume a third-party probe will fit or that a measurement feature is included.

List every process parameter that needs monitoring or control: dissolved oxygen, pH, temperature, agitation, gas flow, foam or weight, as appropriate to the approved process. Ask for a configuration matrix mapping each requested measurement to the vessel port, sensor, adapter, module, controller, software and consumables. The word “no pH” in the catalogue does not mean “pH control included elsewhere,” and an available Pg 13.5 port does not by itself verify compatibility.

If the facility owns a controller, give the supplier the manufacturer, model, modules, software and firmware, drive, probe types and available adapters. Obtain confirmation in writing that the full 3f setup is supported. If the supplier proposes a different vessel or an added pH option, require the exact part number and current compatibility evidence before revising the purchase request.

What should the quotation include beyond the vessel?

Eppendorf states that BioBLU vessels work with small and bench-scale Eppendorf controllers and selected third-party controllers. This is not a guarantee that every control station supports the 3f, or that an existing lab controller has the required motor, agitation range, software, modules or adapter. Request confirmation for the exact controller configuration and catalogue 1386000900.

For a full process setup, ask for a line-item proposal covering the drive and controller; control software and licenses; temperature, dissolved-oxygen and other sensors; gas-mixing and mass-flow components; feed and sample pumps; tubing and connectors; exhaust condenser or treatment; cooling components; calibration tools; and installation or training if required. Confirm whether those items are accessories sold separately. Ask whether the quote includes only a disposable vessel or a reusable system as well.

Eppendorf family documentation discusses sensor ports, additions, sampling, harvest, gas inlet, exhaust and compatible controllers. It does not mean every possible process accessory or control system comes with the 3f item. Request the part numbers and compatibility list for every optional component, and ask the supplier to mark included, optional, separate, excluded or pending technical confirmation. Do not accept an undefined “complete bioreactor system” where the equipment list is unclear.

What site requirements should a Nigerian laboratory assess?

The complete setup may require controlled electrical supply for the controller, drive and ancillary equipment; gas sources and regulators; cooling; exhaust handling; sufficient bench and service space; and data or network interfaces. Request the exact power, frequency, current, grounding, heat output, environmental operating range and footprint for each proposed system component. The vessel's product page alone cannot define a lab's electrical or installation requirements.

For fermentation, involve laboratory engineering and process-safety staff in reviewing gas supply, line routing, exhaust, ventilation, condensate management, cooling and any required containment or waste-treatment systems. State the gases, purity, pressure and flow expectations in the technical brief. The exact needs depend on the organism, process and system configuration; this guide does not establish biosafety level, exhaust treatment design or process controls.

Measure the bench and transfer route, including doors, lifts and receiving areas. Confirm that the autoclave capacity and loading approach are suitable for the vessel and whatever packaging or components the instructions require. Include electrical backup or conditioning requests for the controller system, but have a qualified engineer calculate load and runtime from the full equipment schedule. Do not estimate from the vessel's catalogue page.

When requesting Nigerian delivery, provide destination city and state, receiving contact, site access constraints and any institutional procurement documentation. Ask the quotation to state packaging, shipping, delivery, unloading, customs or tax responsibilities, delivery estimate and any installation requirements. No local stock, shipping timeline, service network, warranty or installation commitment is implied by the Eppendorf source page or Franance listing.

How should a lab compare BioBLU 3f with BioBLU 3c?

The two currently assigned Eppendorf products share a 1.25–3.75 L working-volume range, but they serve different roles and have different exact configurations. BioBLU 3f catalogue 1386000900 is the microbial fermentor: macrosparger, three Rushton-type impellers, no pH, non-sterile and autoclavable. BioBLU 3c catalogue 1386125000 is the cell-culture vessel: macrosparger, one pitched-blade impeller, optical pH and X-ray-irradiated. The working-volume overlap is not a reason to treat them as interchangeable.

Start from the biological system and process objective, then compare headplate, gas handling, impellers, sensor ports, sterilization status, vessel materials, working volume, controller and accessories. Ask whether the facility's process was developed on a specific family or relies on a particular impeller, gas transfer or preparation workflow. Any transition between designs should be reviewed by the process owner and supported by technical evidence; do not imply equivalent growth or productivity.

Use the BioBLU 3f filtered listing for this product and the BioBLU 3c filtered listing for its cell-culture counterpart. The category page shows the current Franance assignments, not every Eppendorf product or vessel configuration sold worldwide.

What documents should procurement request?

Request the current 3f product specification, vessel drawing, instructions for use, autoclave guidance, sterilization status, material and temperature limits, compatible controller and accessory list. Ask the supplier for the exact lot and reference details, shipment/storage requirements, and any traceability documents required by the institution. Verify that the documentation clearly refers to catalogue 1386000900, not a sterile 0.3f or 1f listing.

If the quotation includes a controller, drive, probes or software, request the system manuals, installation requirements, compatibility matrix, service terms and commissioning scope for those exact items. Ask who is responsible for installation, calibration and training, whether each service is available at the Nigerian destination and whether it is included in the commercial offer. Make each commitment explicit; no warranty duration or service entitlement is assumed here.

For a new process or scale-up, request technical support and application information as a separate scope. Vendor application discussion does not replace process validation, facility quality approval or an internal risk assessment. The laboratory decides what evidence is needed before research or production use.

What should I include in a BioBLU 3f quotation request?

Give Franance a concise but sufficiently detailed request:

- Eppendorf BioBLU 3f Single-Use Bioreactor, catalogue number 1386000900, quantity one or specified pack quantity.
- Institution, laboratory contact, delivery city/state in Nigeria and procurement or import requirements.
- Microbial application, target working volume, process mode and any process conditions to review.
- Confirmation that the required supply status is non-sterile and autoclavable, with applicable current instructions requested.
- Existing controller, drive, modules, firmware/software and probes, or a request to quote a compatible system.
- Required sensor, pH, DO, temperature, gas, feed, sample, harvest, cooling and exhaust scope.
- Autoclave capacity, site electrical/gas/cooling requirements, installation route and commissioning or training request.
- Current product docs, compatibility evidence, lot/traceability information and delivery details.
- Requested warranty, service, lead-time, payment and quotation validity terms, each for written confirmation.

Ask the supplier to return a configuration schedule distinguishing the disposable vessel from reusable equipment and marking all requested items included, optional, separately quoted, unavailable or pending review. Your process owner should confirm application suitability; engineering and procurement should review site and commercial terms. Start with the BioBLU 3f exact listing and request a Franance quotation for catalogue 1386000900. Franance will follow up by phone or email; there is no online checkout.

Manufacturer sources and limitations

- Eppendorf BioBLU f Single-Use Bioreactors — exact 1386000900 configuration, microbial application, 3f volume range, controller-family description and non-presterilized/autoclavable status. Accessed 20 October 2026. - Eppendorf BioBLU family brochure — f-line technical data, dimensions of product family, ports, materials and exact order configuration; verify current revision. - Eppendorf BioBLU c Single-Use Bioreactors — used only to distinguish the separate 3c catalogue configuration. - Eppendorf BioBLU single-use vessel use limitation — the brochure states the vessels are not developed for medical diagnostic or therapeutic applications.

Manufacturer descriptions identify the vessel, configuration and family options. They do not independently establish process performance, suitability for a particular organism or product, validated sterilization, GMP status, regulatory authorization, price, supply, Nigerian delivery, warranty, service or installation. Confirm all details for the exact item and process with current Eppendorf documentation and the written quotation.