Buy Radiology Consumables in Nigeria.

Which radiology consumables are listed by Franance?

There are seven film listings. Fujifilm's dry-imaging range includes DI-ML mammography film, DI-HL dry imaging film, and DI-HT dry imaging film. Carestream's dry laser film listings are DRYVIEW DVM+ mammography film, DRYVIEW DVB+ general-purpose laser imaging film, and DRYVIEW DVE laser imaging film. The other film listing is Carestream MXB 8609810 blue medical X-ray film, 14 × 17 in.

The other three records are Parker Laboratories ultrasound gels: Sterile Aquasonic 100 reference 01-01, non-sterile Aquasonic 100 reference 01-20 in 20 g single-use packettes, and non-sterile Aquasonic 100 reference 01-08 in a 0.25 L dispenser. These references describe different products and packages. Verify the item, box/case quantity, labels and current manufacturer documents; the catalogue does not establish Nigerian stock, current packaging revision, shelf life remaining or clinical suitability for an individual examination.

Which imaging films can I request a quote for?

Start with the output device and printing workflow. Dry laser film is made for compatible dry laser imagers and their specific trays, cartridges, formats and processing method. Conventional screen-radiography film is used with an appropriate screen/cassette and its film-processing workflow. A similar sheet dimension does not make two film types compatible. Check the imager or X-ray system manual, supported media list, film type and size, output tray or cartridge, and any image-quality acceptance requirements before specifying a consumable.

For Fujifilm, DI-ML is manufacturer-described as premium dry-imaging laser film dedicated to mammography. FUJIFILM's product information lists DI-ML formats including 26 × 36 cm, 25 × 30 cm and 20 × 25 cm, while compatible sizes depend on the DRYPIX imager and region. DI-HL is general medical dry-imaging film; the manufacturer describes its neutral tone and lists it for specified DRYPIX systems. DI-HT is another dry-film reference. Current regional FUJIFILM information lists DI-HT for DRYPIX Lite, while older documentation refers to DRYPIX 2000. Confirm the exact printer generation, format and current regional product availability instead of relying on an older compatibility chart. See FUJIFILM's current film information and its DRYPIX Smart supported-film specification.

Carestream DRYVIEW DVM+ is the mammography-specific dry laser film in this range. Carestream identifies it for its compatible DRYVIEW mammography laser imagers, including the 5950 and 6950 models on its product information. DRYVIEW DVB+ is general-purpose diagnostic laser film for listed modalities, with exact printer compatibility and format to be checked against the current technical sheet. DRYVIEW DVE is also dry laser-imager film for compatible DRYVIEW systems. Use Carestream's technical-information index to locate the latest DVM+, DVB+ and DVE sheets; cited manufacturer sheets may be older revisions, so verify current part, size, pack and compatible printer before ordering.

The Carestream MXB 8609810 listing is different: MXB is blue medical X-ray film for screen radiography, listed as 35 × 43 cm (14 × 17 in), 100 sheets per package, with five packages per case in the referenced catalogue schedule. Confirm the screen/cassette system and the appropriate processing conditions, and make clear whether the quote quantity means sheets, packages or cases. The manufacturer’s MXB and film technical information and product references should be checked for the exact order configuration.

How do I match film to a laser imager or screen system?

Record the equipment manufacturer, exact imager model and generation, media tray or cartridge type, firmware or configuration where relevant, supported film technology, supported size and local processing settings. Match the film's product reference and format to the manufacturer's compatibility list. If the imager is a mammography printer, confirm the specific mammography film and supported imager. Don't substitute a general-purpose diagnostic film for mammography film based only on dimensions, brand or the fact that both are dry laser products.

For wet-processed screen film, document the X-ray screen/cassette type, film dimensions, film-screen spectral compatibility, processor make/model and chemistry workflow. For dry laser film, confirm cartridge/daylight loading, tray configuration, film dimensions, compatible DRYVIEW or DRYPIX generation and output settings. These items affect procurement compatibility; they do not replace the department's image-quality control, acceptance testing or clinical interpretation standards.

Film is light- and environment-sensitive. Follow the specific film's storage, handling, loading and expiry instructions. Ask for lot number, manufacturing/expiry dates, package integrity, storage history where available and expected delivery conditions. If film arrives damaged, outside its stated shelf life or with packaging affected by moisture or heat, have the facility's imaging lead assess and quarantine it under local procedure before use.

For repeat orders, save the imager model, tray or cartridge, film reference, size, package count and last accepted configuration in the facility's approved purchasing record. Compare the item on the quotation with the original order and check the outer carton and inner pack at receipt. A change in emulsion, film generation, cartridge design, pack count or equipment software may require the imaging team to review compatibility and perform its own image-quality checks before routine use. Do not treat a different film size as an acceptable substitute simply because it fits a tray; the printer's supported media list and diagnostic workflow take precedence.

Which ultrasound gel format should I specify?

Specify sterility first, then dispensing format. Parker Laboratories' Sterile Aquasonic 100, 01-01 is supplied in single-use sterile 20 g foil pouches; the manufacturer lists 48 pouches per box. Its non-sterile 01-20 packette is a 20 g single-use packet, with 100 packettes per dispenser box. The non-sterile 01-08 dispenser contains 0.25 L, with 12 dispensers per box. These package quantities come from manufacturer information and should be confirmed for the current offered pack.

The AIUM 2025 ultrasound transducer and coupling-gel guidance says sterile single-use gel should be used where infection is a concern, including procedures that breach skin, ultrasound on nonintact skin, and near fresh surgical sites; it also describes sterile gel considerations for endocavitary examinations. The exact sterile requirement follows the procedure, device instructions, facility policy and applicable clinical guidance. CDC has also documented contamination associated with nonsterile gel use before percutaneous procedures; see its 2025 report. A packet's single-use packaging does not make non-sterile gel sterile. Don't substitute reference 01-20 or 01-08 for sterile product where sterile gel is required.

For a quote, state sterile or non-sterile, exact Parker reference, unit size, box/case quantity, requested total and intended procedure category. Check product label, lot, expiry, package integrity, storage instructions and any transducer compatibility restriction. Keep gel procurement distinct from probe covers, disinfectants and reprocessing; gel does not replace transducer cleaning or disinfection.

What should a Nigeria radiology-consumables quote include?

For film, provide the exact imager or screen/cassette model, film brand and reference, required dimensions, pack type, cartridge/tray configuration, quantity in packs or cases, department and destination state/city. If ordering for mammography, identify the mammography imager and specify DVM+ or DI-ML only after checking that the exact film is listed for that equipment. For conventional X-ray, state whether MXB screen film is needed and identify the screen/cassette and processing workflow. For general dry laser printing, identify the DRYVIEW or DRYPIX printer and the exact film format supported by that configuration.

For gel, specify Parker reference 01-01, 01-20 or 01-08; sterile status; unit and case quantities; procedure-driven requirements; and receiving, lot/expiry and storage requirements. Include facility, state and city, delivery address, procurement timeline, required product documentation and technical contact. Ask the written quote to state exact manufacturer references, pack count, expiry expectations if agreed, price and currency, taxes, freight, current availability, delivery lead time, substitutions if any, warranty or handling terms and exclusions. Require approval before any alternative film, gel sterility class, packaging size or brand is substituted.

For all products, ask Franance to confirm the exact manufacturer part number, current regional catalogue status and supporting compatibility documentation. Price, stock, import status, delivery, temperature-controlled transport, warranty and local support must be confirmed for the actual order; this guide does not imply they are available.

Agree on the commercial unit before comparing quotes. A film order may be priced per pack, carton or case, and the number of sheets in a pack can vary by format. Gel can be quoted by pouch, dispenser bottle, box or case. Specify a total number of actual units as well as the requested pack count so the supplier and receiving team interpret quantity consistently. If a substitute is proposed, ask the supplier to state its manufacturer and reference, sterile status where applicable, package size and compatibility evidence; accept it only after the responsible department approves the change.

How should a Nigeria facility verify radiology consumables on delivery?

Before dispatch, ask the supplier to confirm the manufacturer, exact reference, film size or gel pack format, number of units per box/case and total units ordered. For film, compare the received label with the accepted imager or screen-system compatibility record. Confirm that the order is for the intended mammography-specific or general-purpose film and that cartridge or tray configuration has not changed. For gel, verify the sterile or non-sterile label against the approved procedure and item reference; do not accept a single-use non-sterile packet as a sterile substitute.

At receipt, reconcile the packing list and delivered quantities, inspect outer cartons and inner packs for damage, and record lot/batch and expiry information required by facility procedure. Follow manufacturer storage and handling instructions during transport and storage, including any temperature or light-protection conditions specified for the product. Keep an item with a damaged package, unclear identity, incorrect reference, unsuitable remaining shelf life or unapproved substitution on hold while the responsible imaging, procurement or infection-prevention lead resolves the discrepancy. This receiving check verifies order identity and condition; it does not replace printer acceptance testing, image-quality controls, gel-use policy or clinical procedures.

Where can I browse radiology consumables?

Browse the Radiology Consumables category, then narrow to X-ray and imaging film or ultrasound gel. The exact model-filtered and brand-filtered listings are linked in the product sections above. See the X-ray film buying guide for the seven current film models.

Request a radiology consumables quotation in Nigeria

Send Franance the exact product reference, compatible printer/imager or ultrasound procedure requirement, film size or gel sterility and pack format, quantities, facility and delivery city/state, documentation needs and preferred delivery timeline. Ask the written quote to confirm current stock and regional configuration and to identify any substitution or exclusion. Request a radiology consumables quotation.