Buy Anaesthesia Breathing Circuit in Nigeria.

Where can I buy anaesthesia breathing circuits in Nigeria?

Request the exact circuit from Franance through the anaesthesia breathing circuit category. Open the matching product listing and include its manufacturer and reference in your enquiry. The listing represents a quotation request, not confirmed stock, a reserved quantity or an offer at a fixed price.

For a single replacement or a hospital tender, tell us whether the circuit is for an anaesthesia workstation, which workstation model it must connect to, the required quantity and delivery location. If you use more than one circuit type, separate them by product code, patient connection, tube arrangement and pack quantity. That gives the facility's clinical and biomedical engineering reviewers a clear basis to check the proposed supply.

Franance can help organise the enquiry and return a written quotation for the listed references. Confirm the proposed pack, availability, price, delivery terms and any requested support in that quotation. Do not rely on a product-family name alone when a model code or a particular connection is required.

Which anaesthesia breathing circuit models does Franance list?

The category has three direct product records. Intersurgical UniFlow Deluxe 2910000 and 2911000 are 30 mm coaxial anaesthesia breathing systems. Intersurgical lists the two references with different minimum system lengths and box quantities: 2910000 is at least 1.6 m with 12 per box, while 2911000 is at least 2.4 m with 10 per box. The manufacturer describes a 2 L reservoir bag, luer connector, integral monitoring line, elbow, APL valve and supplied leak tester for this product family. Confirm the exact contents and current pack configuration against the quote.

The Dräger VentStar Anesth WT 280 is a disposable circuit with a water trap, product reference MP16040. Dräger's accessory information lists a 2 L reservoir bag, OD22 bag connection, tubing lengths of 2.8 m and 1.5 m, a ten-piece package and a statement that it is not made with natural rubber latex. Verify the current catalogue revision and exact configuration before ordering.

Compare the 2910000 product result, 2911000 product result and MP16040 product result. These filtered links identify the current catalogue records; they do not establish that a specific quantity is immediately available in Nigeria.

How do I choose an anaesthesia breathing circuit for a Nigerian facility?

Begin with the anaesthesia workstation's instructions and the facility's approved equipment specification. Record the manufacturer, model, installed configuration, patient connection and any required circuit type or accessory. The clinical team defines the intended use and patient population; biomedical engineering checks the device interfaces and the procurement team confirms the required quantity and pack. Avoid choosing by price or length before confirming the connection and system requirements.

Then compare the exact ordering code and the components supplied. Check the circuit architecture, tube length, monitoring line, bag size and connector, water trap or other accessory, packaging, single-use status and relevant instructions for use. A similar product name can refer to a different code or pack. If the workstation manufacturer lists a specific circuit or approved connector, send that document or reference with the enquiry.

The current catalogue includes only the three references above. It does not show every tubing length, paediatric or neonatal set, filter, bag size, connector or accessory in either manufacturer's wider range. If your specification calls for an unlisted size or configuration, state that as a requirement instead of assuming a listed model can be substituted. Ask Franance to confirm the exact proposed code and any deviation in writing before placing an order.

How do coaxial and other anaesthesia breathing circuits differ?

A coaxial circuit arranges inspiratory and expiratory gas paths concentrically within the circuit. The UniFlow products in this category are identified by Intersurgical as 30 mm deluxe coaxial systems. MP16040 is listed by Dräger as an anaesthesia set with a water trap, but its catalogue description does not identify it as one of the UniFlow coaxial products. Keep their layouts and accessory details distinct when preparing a tender or replacement request.

The manufacturer describes UniFlow as usable for anaesthesia induction, low-flow anaesthesia, and supplemental oxygen during recovery and transport. Those are manufacturer-described applications for its product family, not a recommendation to use a particular circuit for a patient or procedure. The responsible clinicians must select and use equipment under the current instructions, workstation compatibility information and facility protocols.

Do not infer that a circuit is suitable because its connector appears similar or because it can be physically attached. Confirm the intended workstation and patient-end connections, system configuration, dead-space or compliance information required by the clinician, and any monitoring or humidity accessories from the exact manufacturer documentation. The quote should identify any adapter separately; do not assume one is included.

Which connectors, lengths and accessories should I confirm?

Check each connection from the machine to the patient and identify the exact dimensions and standard required by the workstation instructions. MP16040's catalogue record lists an OD22 / Bag Cone 22D bag connector. UniFlow 2910000 and 2911000 use the manufacturer-listed 30 mm coaxial system. These descriptions identify the product references; they do not prove compatibility with every workstation. Include the machine model and the required connection in your enquiry so the proposed configuration can be checked.

The UniFlow references differ in listed minimum length and package quantity. 2910000 is listed at at least 1.6 m and 12 per box; 2911000 at at least 2.4 m and 10 per box. MP16040 is listed with 2.8 m / 1.5 m tubing and a 10-piece package. Confirm whether the quantity on the quotation refers to individual circuits, inner boxes or shipping cartons, and check expiry or shelf-life documentation if required by your purchasing policy.

Ask which components come in the quoted package: reservoir bag, monitoring line, elbow, APL valve, water trap, leak tester, luer connection and any other accessory. A family page may describe multiple variants, and components may change by order code or revision. Use the manufacturer's current instructions and product-specific ordering information rather than relying on a photograph or a broad catalogue description.

Is Dräger MP16040 a single-use water-trap anaesthesia circuit?

The published Dräger accessory material describes disposable anaesthesia circuits and lists VentStar Anesth WT 280 / MP16040 as a water-trap set. It identifies the 2 L bag and OD22 bag connector, along with the listed tubing lengths and package details. The same product information distinguishes this category from Dräger's wider intensive-care, paediatric and neonatal breathing-circuit families. Confirm the exact product and intended use in the current instructions for use supplied with the offer.

The Intersurgical UniFlow references are also disposable product records. Their manufacturer page says each UniFlow system is supplied with a leak tester for independent integrity checks of its inner and outer lumens. The page also describes a 2 L bag and an APL valve. These statements describe the manufacturer-listed product; follow its current instructions for the test procedure and acceptance criteria. This guide does not provide a clinical setup or leak-test procedure.

Disposable status does not remove the need to check storage, packaging condition, product labelling, expiry information, and the facility's receiving and waste procedures. The buyer should request the product-specific documentation and confirm that the proposed items match the facility's validated procurement requirements.

What should Nigerian hospitals check before ordering breathing circuits?

Ask for the exact manufacturer, reference, description, intended workstation interface, pack quantity, included accessories, current instructions for use and any required compatibility statement. For each variant, record the expected quantity per theatre, the number of theatres, planned replenishment quantity and any shelf-life requirement. Have the responsible clinical, biomedical engineering and infection-prevention teams review the selected disposable item under the facility's procedures.

For a project or tender, include the workstation make and model, its installed connector configuration, circuit type, bag or tubing requirements, monitoring connections, required standards or tender clauses, delivery city and state, quantity and expected timeline. If the equipment is part of a new workstation package, identify the workstation and ask the supplier to list the circuit and accessories separately. This makes omissions or assumed substitutions easier to spot.

No listing here establishes NAFDAC registration, Nigerian stock, distributor appointment, local warranty or service entitlement. Ask for any regulatory, quality, batch, conformity or import documents required for your procurement, and confirm the exact status of the proposed item before the order. The manufacturer may revise a product page or catalogue; use current documentation for the quoted code.

How much do anaesthesia breathing circuits cost in Nigeria?

The category does not publish a confirmed selling price for these quote-order items. The price depends on the exact product code, pack quantity, requested volume, availability, destination, delivery terms and any procurement documentation or scope agreed for the order. No fixed price should be inferred from a manufacturer catalogue, prior order or a product-family page.

Send the code and quantity for each circuit separately. Ask the written quotation to state unit or pack basis, currency, quote validity, included items, delivery charges, taxes or other charges, lead time if confirmed, and any exclusions. For the Intersurgical products, ensure that the quotation distinguishes 2910000 from 2911000 and reflects the correct box quantity. For MP16040, verify that the quoted pack corresponds to the current manufacturer documentation.

Franance handles the enquiry as an order for quotation, then follows up by phone or email. There is no online payment or instant checkout. Confirm the commercial terms in writing before issuing a purchase order.

Can Franance deliver anaesthesia circuits across Nigeria?

The catalogue does not confirm current stock, delivery coverage, lead time, or freight terms for an individual reference. Include the destination city, state, facility address, receiving contact, delivery access and requested date. Franance can then confirm the offer for that location in its written quotation. Do not assume that a delivery statement for a different product or a previous order applies to these items.

If your facility is in Lagos, Abuja or another state, provide the destination and any receiving restrictions so the offer can account for them. For a tender, specify whether the delivery must be to a central store, theatre store or named hospital department and whether packing lists, batch documentation or a delivery appointment are required.

For any workstation installation, configuration or clinical training question, name the support explicitly. The product listings do not establish that installation, training or after-sales service is included. Ask Franance to state whether such work is offered, who performs it, and what scope and terms apply to the exact purchase.

How do I request an anaesthesia breathing circuit quotation from Franance?

Use the Franance quotation request for anaesthesia breathing circuits. Include the product name and reference, quantity by pack, workstation make and model, connector requirements, expected use environment, destination city and state, delivery window and any tender or quality-document requirements. If you are replacing an existing circuit, attach its labelled code or the workstation specification rather than relying on a photograph alone.

For an equipment project, attach the approved bill of quantities and identify which items are firm requirements and which are alternatives. Ask for the proposed model, pack basis, included components, availability, price and delivery terms to be written separately. Franance follows up by phone or email to clarify the request and confirm the quotation. Review the exact product code and configuration with the facility's clinical and biomedical engineering teams before placing an order.

To compare related equipment, visit the anaesthesia systems category, the anaesthesia vaporizer category, or the anaesthesia gas scavenging category. These are separate product groups; a breathing circuit listing does not include a vaporizer, workstation or scavenging system unless the written quotation says so.

Frequently asked questions about anaesthesia circuits in Nigeria

### Which anaesthesia breathing circuit products can I request from Franance?

The current category lists Intersurgical UniFlow Deluxe 2910000, Intersurgical UniFlow Deluxe 2911000 and Dräger VentStar Anesth WT 280 MP16040. Ask Franance to confirm the exact quoted reference, pack and current availability.

### Are Intersurgical 2910000 and 2911000 the same length?

No. Intersurgical lists 2910000 at a minimum 1.6 m system length and 2911000 at a minimum 2.4 m. It also lists different quantities per box. Confirm the current catalogue details for the exact product code.

### Does the MP16040 listing prove compatibility with my workstation?

No. The Dräger product record identifies a circuit and connector information, but compatibility must be confirmed against the exact workstation model and current instructions.

### Can I buy these circuits online?

No. Franance receives quote orders and follows up by phone or email. The written quote confirms the product, pack, price and commercial terms; no online payment is taken.

Sources and limitations

Manufacturer information used for the product details includes the Intersurgical UniFlow Deluxe product page and the Dräger disposable breathing circuits product information. The guide was reviewed on 21 October 2026 against these sources and the three current Franance product records. Manufacturer pages can change; verify the currently offered code, package and instructions before purchase.

This is procurement guidance, not advice on patient selection, anaesthesia, circuit assembly, monitoring, testing or reprocessing. The responsible healthcare professionals must use the current manufacturer instructions and facility-approved procedures. The category does not establish Nigerian stock, price, NAFDAC status, delivery date, warranty, installation, training or local service. Confirm any required regulatory and commercial information in the quotation.