Browse Varex Imaging X-ray tube and detector products listed by Franance and request a quotation. Confirm the equipment reference, housing, focal spots and installation requirements for the intended imaging system.
Buy Varex Imaging Diagnostic imaging in Nigeria through Franance. The current catalogue lists Varex Imaging RAD-14 Rotating-Anode X-Ray Tube. For a quotation order, provide the RAD-14 reference, compatible X-ray system and generator details, and the required replacement or project scope. Include quantities and delivery destination; Franance will follow up by phone or email.
Buy Varex Imaging X-Ray & Digital Radiography (DR) in Nigeria through Franance. The current catalogue lists Varex Imaging RAD-14 Rotating-Anode X-Ray Tube. For a quotation order, provide the RAD-14 reference, compatible X-ray system and generator details, and the required replacement or project scope. Include quantities and delivery destination; Franance will follow up by phone or email.
Send exact model references, quantities by location and the intended facility requirements. Ask Franance to confirm the offered configuration, accessories, delivery and any separately requested technical services in the written quotation.
Buy Varex Imaging X-Ray Tube in Nigeria through Franance. The current catalogue lists Varex Imaging RAD-14 Rotating-Anode X-Ray Tube. For a quotation order, provide the RAD-14 reference, compatible X-ray system and generator details, and the required replacement or project scope. Include quantities and delivery destination; Franance will follow up by phone or email.
Send exact model references, quantities by location and the intended facility requirements. Ask Franance to confirm the offered configuration, accessories, delivery and any separately requested technical services in the written quotation.
Send exact model references, quantities by location and the intended facility requirements. Ask Franance to confirm the offered configuration, accessories, delivery and any separately requested technical services in the written quotation.
Buy Varex Imaging RAD-14 X-ray tubes in Nigeria: replacement and quotation guide
Request a Franance quotation for the Varex Imaging RAD-14 rotating-anode X-ray tube insert in Nigeria. The RAD-14 is a component used within diagnostic imaging equipment, not a complete X-ray system or necessarily a complete tube housing assembly. Provide the installed system, existing tube and housing references, focal-spot requirement, generator and connection details so the exact replacement can be reviewed before an order is quoted.
Varex’s product information and data sheet describe RAD-14 variants with several focal-spot combinations and specifications including a 150 kV maximum and 212 kJ (300 kHU) anode heat content. A model-family match alone does not confirm compatibility with a particular radiographic system. Franance accepts quote orders and follows up by phone or email; local stock, delivery, warranty, installation and service must be confirmed in the written offer.
Where can I buy a Varex RAD-14 X-ray tube in Nigeria?
Send Franance a quote request naming Varex RAD-14 and the exact equipment in which the tube will be installed. Include the X-ray system manufacturer, model, serial number, existing tube and housing labels, required focal spots, target angle, generator details, high-voltage connections and the destination facility. Attach clear photos of rating plates and existing parts where institutional policy permits, along with the approved procurement specification.
Ask the quotation to identify whether it covers an insert, housing assembly or another replacement scope. Confirm the exact Varex part reference and variant, what is included, required compatibility evidence, commercial terms, delivery arrangements and any requested technical work. No Nigerian stock, price, delivery date, installation, warranty, regulatory approval, Varex authorization or local support is implied by the listing.
Franance follows up by phone or email after receiving a quote order. If the hospital is replacing a failed tube, provide the service engineer’s factual diagnosis and the system documentation. The equipment owner should have a qualified imaging engineer and the relevant equipment manufacturer review the replacement match before procurement and installation.
What Varex products are currently listed by Franance?
The current Varex Imaging assignment is the RAD-14 rotating-anode diagnostic X-ray tube insert, listed in the X-ray tube category under diagnostic imaging and digital radiography. The filtered brand listing shows the assigned product; searching the category for RAD-14 narrows the page to that model. This is a single catalogue assignment, not a complete Varex Imaging portfolio or an assertion that no other tube variants exist.
Varex’s broader materials include tube inserts, housings, detectors and other components. The existence of an item in the manufacturer catalogue does not mean it is currently listed by Franance. If your system needs a different Varex reference or a complete assembly, provide its exact part identifier for separate review rather than assuming RAD-14 includes the required housing or accessories.
Use the brand-filtered X-ray tube page to identify the current RAD-14 listing, then use the exact model query when referencing it in your enquiry. The listing supports product identification; the written quotation must confirm the actual part, configuration and any compatibility review.
What is the Varex RAD-14?
Varex identifies RAD-14 as a rotating-anode X-ray tube insert for diagnostic imaging. Its product materials describe use in general radiography and fluoroscopy or spot-film procedures. The Varex product data sheet describes a 3-inch (80 mm) insert with a 150 kV maximum, a 12-degree target and anode heat content of 212 kJ (300 kHU). These manufacturer specifications identify the tube family; they do not by themselves establish system fit.
The RAD-14 product data sheet lists focal-spot combinations including 0.3/1.2, 0.6/1.2 and 0.6/1.5. Varex replacement-tube information also shows RAD-14 cross-references for different original tube and housing combinations. These examples reinforce the need to identify the exact existing tube and housing. Do not select a replacement solely because a catalogue table contains a similar manufacturer code.
Ask the quotation to state the exact focal-spot combination, target, insert dimensions, high-voltage receptacle configuration and tube-part reference. Confirm the current data sheet revision and any application-specific notes with the supplier. The actual equipment’s service documentation and qualified technical review govern whether a particular variant can be used.
Is RAD-14 a complete X-ray tube housing assembly?
The Franance assignment describes RAD-14 as a tube insert. The product record specifically cautions that the listing is not a complete housing assembly. Some replacement applications require a tube insert matched to a separately identified housing or an entire housing assembly with associated parts. Confirm what is included before comparing prices or approving a replacement.
Provide the installed housing maker and model, housing serial number, present tube identification, interface drawings and the imaging system model. Ask whether the quoted part is insert-only or includes a housing, cables, connectors, cooling or other components. Request the supplier’s technical response to identify the exact replacement scope and any re-use conditions.
Do not assume that any RAD-14 tube will fit any RAD-14-compatible housing. Varex’s cross-reference examples include specific original tube and housing references and are not a blanket compatibility warranty. Have the equipment manufacturer or qualified imaging engineer verify the complete assembly and the applicable service instructions before procurement.
How do I verify focal spots, target angle and generator compatibility?
Check the existing tube label, equipment service manual, generator requirements and system configuration. Varex lists several RAD-14 focal-spot pairs, and the listed Varex product page may focus on one configuration. The exact option required depends on the installed system and its approved application. Request a quote using the complete focal-spot pair and ask for it to appear in the proposed part reference.
The Varex product data sheet states a 12-degree target and gives tube ratings. Confirm that the offered tube’s target angle, operating characteristics, focal spots, receptacles and cooling requirements match the installed system. Do not infer compatibility from maximum voltage or heat capacity alone. The generator and tube must be assessed together against system documentation and manufacturer requirements.
Record any discrepancy between the existing part and proposed replacement for review. Ask the technical supplier to state whether an alternative requires changes, validation or additional components. This guide does not provide installation or calibration instructions. Those tasks belong to qualified imaging service professionals under the applicable manufacturer documentation.
What details should a hospital include in a RAD-14 replacement request?
At minimum, provide the exact system manufacturer and model, serial number, existing tube and housing identification, failure or replacement context, focal-spot configuration and site destination. Include images of the tube label and connections if they can be shared safely and the service documentation allows it. State the requested part scope: insert only, housing or complete replacement package.
Add the procurement quantity, desired timing, tender requirements, acceptance documents and contact for the imaging engineer. If the equipment belongs to a fleet or multiple facilities, map each system and part reference separately. Similar room names do not guarantee identical equipment or tube compatibility. Ask for a model-specific match per system.
Do not send patient information as part of a component enquiry. The technical review usually needs equipment identifiers and fault details rather than patient records. If the quote provider needs additional system information, obtain it from the biomedical team and share only what is necessary under the institution’s procedures.
How should a Nigerian facility plan receiving and installation?
Provide the full destination, city, state, site contact and access or delivery conditions. Ask the quotation to state packaging, transport responsibilities, insurance, timing and receiving requirements for the specific tube or assembly. A tube component can have handling and storage conditions that differ from general spare parts; request current manufacturer packaging and handling instructions for the exact item.
Installation and recommissioning require appropriately qualified service personnel and system-specific instructions. Ask whether the quoted scope includes any inspection, installation or support, who provides that work, where it will occur and what acceptance evidence will be supplied. Do not assume a component listing includes local engineering labour, calibration or return-to-service verification.
Before the equipment is returned to clinical operation, the facility should follow its approved acceptance and quality procedures and the equipment manufacturer’s service requirements. The responsible technical team determines the necessary checks. No specific Nigerian technician, installation date, travel coverage or post-installation support is established by the current catalogue assignment.
What affects a Varex RAD-14 quotation in Nigeria?
The quote depends on the exact tube variant, focal-spot pair, insert or housing scope, system compatibility, quantity, requested documentation, delivery destination and any technical work. Ask for the Varex part reference, included items, packaging, transport, currency, taxes, quote validity and payment terms to be stated clearly. If a housing or another variant is proposed, request a separate line and technical explanation.
Compare offers using matching technical scopes. An insert-only quote is different from a complete housing assembly, and a model with different focal spots is not automatically a suitable substitute. Ask how the supplier arrived at the match and which equipment references were reviewed. Have the hospital’s technical reviewers approve any variation before the order is placed.
No universal Nigerian price, stock position, delivery timeline, warranty or service term is published here. Franance accepts quote orders and follows up by phone or email; it does not take online payment. Confirm availability, warranty, delivery and all responsibilities in the actual written proposal.
What technical documents should I request before ordering?
Request the current Varex RAD-14 data sheet and the documentation for the exact part number being offered. Ask for the available focal-spot option, target angle, voltage and heat-content data, high-voltage connection details, dimensions and any housing compatibility information. Confirm the document revision and ensure it applies to the quoted variant.
Provide the equipment manufacturer’s service documentation to the qualified reviewer and request written confirmation of the proposed replacement match. If the proposal cites a cross-reference, verify that it covers the complete tube and housing arrangement for your installed system. A cross-reference table does not necessarily certify every individual retrofit or guarantee the condition of associated equipment.
If the tender requires conformity documents or traceability, list the precise requirement and ask the supplier what is available for the quoted unit. Confirm warranty terms, handling, return process and service responsibilities separately. This guide does not claim Nigerian registration, approval or a manufacturer-backed warranty for a particular order.
How do I request a Varex Imaging RAD-14 quotation from Franance?
Send Franance the RAD-14 model, installed system and tube/housing identities, focal-spot pair, required insert or assembly scope, quantity, facility destination and procurement schedule. Include the relevant technical schedule and the imaging engineer’s contact. Ask that the proposed Varex part number, compatibility basis, documents, availability, delivery, warranty and any service work be stated in the quote.
Use the Varex Imaging brand-filtered X-ray tube category and search RAD-14 to identify the catalogue assignment. Franance will follow up by phone or email to clarify the quote order. The listing does not by itself confirm that a specific tube fits your scanner or radiography system; technical confirmation is essential before approval.
Have the qualified equipment reviewer and procurement team assess the exact quotation together. Confirm the final part scope, documents, terms, receiving plan and installation responsibilities before placing an order. A complete system and component description gives Franance a clearer basis to discuss the request and reduces the risk of quoting the wrong tube configuration.
Common questions
Can I buy a Varex RAD-14 online in Nigeria?
No. Franance accepts quote orders and follows up by phone or email to clarify the part and proposed terms.
Does RAD-14 include a tube housing?
The current listing describes a tube insert. Confirm whether the quote is insert-only or includes another assembly.
Will RAD-14 fit my X-ray system?
Compatibility depends on the installed tube, housing, generator, focal spots and interfaces. Obtain a technical match for the specific equipment.
Can Franance install the replacement in Nigeria?
This guide does not establish installation coverage. Request a written scope naming the provider, location and responsibilities.
Does the catalogue confirm Varex stock or warranty?
No. Availability, delivery, warranty and service terms must be confirmed in the actual quotation.
Request a Varex RAD-14 replacement quotation.
Send the system and tube references, housing details, focal spots, requested part scope, quantity and facility destination. Franance will follow up by phone or email.
