Buy OPTOMIC colposcopy equipment
in Nigeria.
Browse OPTOMIC OP-C2 and OP-C5 optical colposcopes listed by Franance. Identify the model, optics, illumination, mounting and any requested imaging accessories, then provide your clinic requirements and location to request a quotation.
Buy OPTOMIC Women’s Health Equipment in Nigeria
The OPTOMIC products listed in this broader maternal and neonatal category are OP-C2 and OP-C5 optical colposcopes. OPTOMIC describes its OP-C5 as a colposcope for diagnostic observation and minor procedures in a clinical office. Review both product records and specify the exact optics and mounting setup needed by your gynaecology service.
Buy OPTOMIC Gynaecology Equipment in Nigeria
Franance lists OPTOMIC’s OP-C2 and OP-C5 optical colposcopes under OBGYN equipment. The OP-C5 manufacturer page describes stereoscopic optics, multiple magnification steps and accessory options; configurations vary by selected components. State which model and clinical-room setup you are considering when requesting a quotation.
Specify OP-C2 or OP-C5, preferred magnification and working-distance configuration, illumination source, stand or wall mounting, imaging or documentation accessories, quantity and clinic location. Include room dimensions and any existing monitor or camera system to be considered. Ask Franance to itemise the colposcope and selected accessories.
Buy OPTOMIC Colposcopes in Nigeria
The OPTOMIC colposcope products listed by Franance are the OP-C2 Optical Colposcope and OP-C5 Optical Colposcope. OPTOMIC’s OP-C5 information describes optical and illumination choices, a magnification changer and optional video or photography accessories. Request a quotation with the model and configuration your clinic intends to evaluate.
Identify OP-C2 or OP-C5; specify optics, illumination, stand or mounting style, camera or monitor accessories, quantity and destination. Include the intended room layout and any image-capture or documentation requirement. Ask Franance to state the exact model and selected components in the proposal so your team can compare the quoted setup with its needs.
Name the OP-C2 or OP-C5, required magnification and illumination configuration, floor or wall mount, beam splitter or camera accessories if needed, room layout, quantity and destination. If an imaging or documentation workflow is required, describe the camera and monitor setup separately. Ask Franance to confirm the selected configuration in the written quote.
Where can I buy an OPTOMIC colposcope in Nigeria?
Review the OPTOMIC OP-C2 colposcope listing or the OPTOMIC OP-C5 colposcope listing. Each is filtered by brand, category and model. The catalogue currently includes both models; it does not imply that every OPTOMIC colposcope or accessory is listed or available for immediate supply.
Read moreWhat is an OPTOMIC optical colposcope?
An optical colposcope provides a magnified stereoscopic view for examination and procedures within its intended use. OPTOMIC describes OP-C2 and OP-C5 as colposcopes for diagnostic observation and routine office interventions or small surgical activities, with the exact claims and authorized uses governed by current product labeling and professional practice. These descriptions should not be used to infer that a particular model is appropriate for every gynaecology service or procedure.
Read moreWhat is the OPTOMIC OP-C2?
OPTOMIC describes OP-C2 as a compact colposcope with a stereoscopic binocular head, coaxial illumination through the objective, a three-step Galilei magnification changer and micrometric focusing. The official OP-C2 product page lists a magnification range of approximately 3.5× to 17.5×, depending on the selected objective, binocular and eyepieces. It lists a 250 mm working distance with the standard objective and says a 300 mm objective is optional. Verify the proposed optical combination before comparing quotes.
Read moreBuy OPTOMIC colposcopes in Nigeria
Franance lists two OPTOMIC optical colposcopes for Nigerian facilities to review through a quotation order: OP-C2 and OP-C5. Both are assigned to the colposcope category, but the models have different optical configurations, magnification changers and published working distances. Browse the OP-C2 filtered colposcope listing and the OP-C5 filtered colposcope listing to compare the current catalogue items. OPTOMIC's manufacturer pages describe stereoscopic optics, coaxial illumination, fiber-optic light and mobile support systems. Some specifications depend on the chosen objective, binocular, eyepieces, light source, mounting configuration or optional imaging accessories. Ask for a model-specific technical schedule and an itemized list of everything included. A colposcope model name or image does not establish the exact optical assembly, video features, monitor, mount, installation package or clinical suitability. No Nigerian stock, authorised local distribution, price, regulatory status, warranty, delivery, installation, training or service is promised by this guide. Franance uses a quotation order process: send the requested model, options, quantity, facility location and intended room workflow, and Franance will follow up by phone or email. Confirm the exact model, configuration and local terms in writing before placing an order. This is procurement information, not clinical advice; use and selection should follow current manufacturer instructions and qualified clinical review.
Where can I buy an OPTOMIC colposcope in Nigeria?
Review the OPTOMIC OP-C2 colposcope listing or the OPTOMIC OP-C5 colposcope listing. Each is filtered by brand, category and model. The catalogue currently includes both models; it does not imply that every OPTOMIC colposcope or accessory is listed or available for immediate supply.
Send Franance the exact model, quantity, objective and mounting preferences if known, required illumination, eyepiece requirements, video or photography needs, intended room, city and state, and desired timeline. If you are replacing existing equipment, include the current optical head, stand, light source and imaging accessories so the proposed configuration can be checked. For a new room, provide a floor plan or dimensions and describe where the clinician, patient, assistant and monitor will be positioned.
Franance will follow up by phone or email to clarify the quote request and discuss a quotation order. The listing is not live inventory, a published price or confirmation of a Nigerian distributor relationship. Request written confirmation of availability, exact configuration, price validity, freight, taxes, delivery terms, warranty provider, installation and service before approving an order.
What is an OPTOMIC optical colposcope?
An optical colposcope provides a magnified stereoscopic view for examination and procedures within its intended use. OPTOMIC describes OP-C2 and OP-C5 as colposcopes for diagnostic observation and routine office interventions or small surgical activities, with the exact claims and authorized uses governed by current product labeling and professional practice. These descriptions should not be used to infer that a particular model is appropriate for every gynaecology service or procedure.
The basic optical system includes components such as the binocular head, eyepieces, objective, magnification changer, focus, illumination, support arm and stand. OPTOMIC's published specifications show that the chosen objective and optical combination influence magnification and working distance. Light source and video systems may be optional or configured differently. A procurement schedule should name the references for those components rather than relying on a general model name.
OPTOMIC also describes optional video-colposcopy or digital-photography systems, beam splitters, monitor supports and trays. These additions can change how images are captured, shown or recorded. Confirm the entire path from optical head to camera or splitter to monitor or workstation, including cables, resolution, software and storage. Do not assume that a colposcope automatically contains a camera or recording function.
What is the OPTOMIC OP-C2?
OPTOMIC describes OP-C2 as a compact colposcope with a stereoscopic binocular head, coaxial illumination through the objective, a three-step Galilei magnification changer and micrometric focusing. The official OP-C2 product page lists a magnification range of approximately 3.5× to 17.5×, depending on the selected objective, binocular and eyepieces. It lists a 250 mm working distance with the standard objective and says a 300 mm objective is optional. Verify the proposed optical combination before comparing quotes.
The manufacturer describes halogen, xenon or LED cold-light choices, a fiber-optic light path and a green filter in the broader OP-C2 description. The current product brochure may present a particular LED configuration; therefore, confirm the exact light source offered, its reference, power requirements, included filter and replaceable components. Do not assume a specific light source from the model name alone.
OPTOMIC describes an adjustable arm and a mobile floor stand, with different floor or wall mounting possibilities and optional monitor supports or trays. The exact support arrangement and room fit should be checked before order. If the clinic needs image capture or external display, ask for the specific optional video system, splitter, camera, monitor, software and connection requirements. The baseline optical unit should not be confused with a complete video-colposcopy installation.
What is the OPTOMIC OP-C5?
OPTOMIC positions OP-C5 as a higher-range model in its colposcope portfolio. Its manufacturer product page describes a stereoscopic binocular head that can also be used with a straight binocular tube, a five-step Galilei magnification changer, micrometric focus and selectable light-source configurations. The manufacturer lists a magnification range of about 2.5× to 27× depending on the chosen objective, binocular and eyepieces. It describes a 300 mm working distance with the standard objective and a 250 mm objective as optional on its current page. Confirm the exact optical package on the official OP-C5 product page and its current brochure.
OP-C5's published specifications include a 45-degree inclined stereoscopic binocular head, adjustable eyepieces, a parallelogram arm, braking or movement adjustments and different floor or wall mounting options. A technical brochure also lists possible objective and varifocal combinations and an approximate body weight; specifications can change and may vary by selected options. Use the current revision supplied with the quote, not an older brochure, as the basis for room planning and procurement.
The manufacturer describes optional supports, laptop trays, camera trays, beam splitters and video or digital photography systems. It also lists an adapter for a CO2 laser micromanipulator as an available accessory. These are not assumed to be standard components. If a clinic needs a laser interface, video path, external monitor or documentation system, identify it as a separate requirement and obtain confirmation of all compatible parts and interfaces.
How do OP-C2 and OP-C5 differ?
The published optical distinction includes a three-step magnification changer on OP-C2 versus five steps on OP-C5. OPTOMIC lists a model-dependent approximate range of 3.5×–17.5× for OP-C2 and 2.5×–27× for OP-C5, with actual range depending on the selected objective, binocular and eyepieces. OP-C2 is described with a standard working distance of 250 mm; OP-C5's current English page lists 300 mm with its standard objective. These are manufacturer specifications, not a recommendation that one model is suitable for a particular clinical task.
Compare the exact quoted optical assemblies. Ask the supplier to identify the objective focal length, binocular style, eyepiece magnification and field, magnification steps, focus mechanism, working distance and light source. Confirm whether the quotation includes the same items as the competing proposal. A higher model number or maximum magnification alone does not show whether the field, working distance or ergonomics suit the clinician's requirements.
The responsible gynaecologist and clinical engineering lead should assess magnification needs, posture, focus, room geometry, lighting, patient access and any planned imaging. If multiple users will share the system, assess whether adjustments can be made for different clinicians. If the facility plans video capture or laser-assisted procedures, validate the complete optional configuration and safety requirements before choosing a model.
Which light source and optical options should I request?
Identify the required light source: OPTOMIC's product pages describe halogen, xenon or LED choices, while specific product brochures may show a particular LED source or configuration. Ask for the source model, lamp or LED type, rated power, service-life or replacement information, fiber-optic cable, green filter, illumination controls and included parts. Confirm whether the source is removable and what it can be used with according to the current manual. Do not assume the light source shown in a product photo is included in the quote.
Request the optical configuration in detail: objective focal length and working distance, binocular type and angle, eyepiece magnification and diopter adjustment, magnification changer steps, interpupillary adjustment and focus. Ask which components are standard and which are optional. If you have a preferred clinician position or room layout, include that information so the mounting and arm options can be reviewed.
If optional image systems are required, specify whether the clinic needs live video, still images, display on an external monitor, laptop support, a beam splitter, camera, image capture software or storage connection. Ask for model references, supported video outputs, monitor specifications, computer requirements, included cables and any necessary licenses. A support tray or beam splitter is not itself a camera, monitor or recording system.
How should I plan room layout and mounting?
Before ordering, measure the examination room, clinician working area, patient couch or chair, assistant position, door openings, floor clearances and equipment route. The colposcope's stand, arm and optical head need room to position and move. Confirm the full working envelope for the specific floor or wall configuration, including where the arm can swing and whether it can reach the intended examination position without colliding with other equipment.
Ask the supplier for assembled dimensions, packed size, weight, footprint, required floor clearance, cable length and anchoring or mounting requirements. For a floor stand, confirm caster locks and movement controls. For wall or chair mounting, obtain the exact mount and compatibility requirements and have facilities validate wall structure or chair load. Do not infer mounting compatibility from the fact that OPTOMIC offers different mount options across its product range.
Evaluate viewing height, clinician posture, visibility through the binocular, patient access and placement of optional monitors or trays. If images will be displayed to the patient or a second clinician, plan the monitor location and cables. Facilities, clinical engineering, infection prevention and the clinical service lead should approve the room plan before purchasing. The supplier should state whether assembly, positioning and commissioning are included or separately quoted.
What does an OPTOMIC colposcope package include?
Do not assume that a photograph or model page defines the package. Ask the quotation to itemize optical head, objective, binocular, eyepieces, magnification changer, focus, light source, fiber-optic cable, green filter, arm, stand or wall mount, casters, brakes, power connections and any included accessories. Identify the model references and quantity for each part. Confirm whether the chair, camera, monitor, splitter, trays, computer, software and recording device are included or optional.
For OP-C2, specify whether you require the compact floor stand, wall mount, alternate objective, selected light source or optional monitor and camera support. For OP-C5, specify its objective and optical combination, any straight binocular option, video components, laser-micromanipulator adapter or trays if needed. These options need explicit confirmation and may not be available in every configuration or market.
Ask for the packing list and model-specific instructions for use, installation and maintenance. Confirm electrical input, plug, local power compatibility, service access and any required installation tools. If the proposal includes software or an imaging system, ask for its version, supported operating systems, licensing, data formats, network requirements and privacy considerations. A complete written bill of materials helps the facility compare offers accurately.
What does an OPTOMIC colposcope cost in Nigeria?
Franance does not publish fixed prices for OP-C2 or OP-C5. Request a quote that names the exact model, optical configuration, light source, mount, optional video equipment, monitor, software, quantity and destination. The total can vary with objectives, binoculars, supports and imaging accessories. Ask the quote to separate the base optical instrument from options, freight, insurance, installation, commissioning and any training or service.
The quote should state currency, price validity, payment terms, taxes, import or delivery charges, lead time and exclusions. Do not treat an overseas product price or manufacturer's contact details as the final cost of a Nigerian transaction. For a hospital tender, send the required document list, delivery schedule and quote format with your enquiry so the supplier can confirm what is available for the proposed sale.
Franance will follow up by phone or email after receiving the requirements. This does not mean stock or a delivery date is guaranteed. Confirm availability, price and all local commercial terms in the written quotation and obtain clinical and procurement approval before proceeding.
What documentation, warranty and service should I confirm?
Ask for the current instructions for use, technical specifications, model references, any optical or illumination options, installation notes, cleaning method and maintenance schedule for the exact OP-C2 or OP-C5 configuration. Confirm any regulatory documentation required by the facility or destination with the supplier and your regulatory lead. A manufacturer's page or PDF is not evidence that a specific Nigerian transaction has all required approvals.
Ask who provides the warranty, how long it lasts, when it begins, what it covers, which exclusions apply and how a repair claim is handled. Confirm where service is performed, who pays transport, how replacement parts are sourced and whether a local technician is available for your city. OPTOMIC's public contact details do not establish a Nigerian distribution, warranty or repair arrangement, and no local entitlement should be inferred from this guide.
If installation, optics alignment, user orientation or video-system setup is important, request those as explicit quote line items. Ask what acceptance tests or handover records will be provided and who is responsible for ongoing maintenance. If the written proposal does not confirm the support that your facility requires, resolve that gap before authorizing purchase.
Can Franance deliver OPTOMIC colposcopes across Nigeria?
The catalogue does not promise nationwide inventory or delivery. Provide the facility city and state, full receiving address, contact person, receiving hours, access route, floor level and desired timeline. Ask Franance to confirm whether the exact model and optional configuration can be quoted for that destination, the proposed lead time, transport and insurance terms, unloading requirements and whether assembly or installation is included.
For more than one site, list the model, options, quantity, contact and date for each facility. Confirm whether the equipment will be delivered assembled or packed, who handles final movement and whether there are doorway, lift or stair constraints. The colposcope's optical components and stand may require careful handling; ask the supplier to specify packing and receipt procedures for the actual shipment.
Before delivery, have facilities and clinical engineering confirm room readiness, power, mounting and access. Set up a receiving checklist to record model and serial identifiers, accessories, packaging condition and any visible transit damage. If installation or imaging-system integration is required, coordinate those tasks in advance and identify the responsible provider in writing.
How do I request an OPTOMIC quotation from Franance?
Open the OP-C2 filtered colposcope listing or the OP-C5 filtered colposcope listing. Tell Franance the model, quantity, optical configuration, objective, light source, mount, video or photography requirements, room location, delivery city and state, timeline and required documents. If you are comparing both models, ask for separate line-item proposals using a common accessory and installation scope.
Franance will follow up by phone or email to clarify the request and discuss a quotation order. Review the offer for the full model reference, optical and illumination components, mount, accessories, options, price validity, delivery and insurance, warranty, regulatory documents, installation and service terms. Request written clarification if the quotation says “video-ready,” “complete” or “compatible” without identifying the included parts.
Before approval, have the clinician validate the clinical specification, biomedical engineering confirm the optical and electrical configuration, facilities check room fit, IT assess any imaging software and data handling, and procurement verify commercial terms. This protects the facility from assumptions about package contents, local availability or service while producing a quote that reflects the actual room and workflow.
Common questions
Where can I buy OPTOMIC colposcopes in Nigeria?
Franance lists OP-C2 and OP-C5 colposcopes for quotation. Send the exact model, optics, light source, accessories, quantity and destination. Franance will follow up by phone or email; confirm price, availability, delivery, warranty and service in writing.
What is the difference between OP-C2 and OP-C5?
OPTOMIC lists a three-step magnification changer and about 3.5×–17.5× range for OP-C2, and a five-step changer and about 2.5×–27× range for OP-C5. Actual range depends on the selected optics and should be confirmed for the quoted configuration.
Does an OPTOMIC colposcope include video and a monitor?
Do not assume those are included. OPTOMIC describes optional video, photography, beam splitters, monitor supports and trays; ask the quotation to identify the exact components and software.
Request an OPTOMIC colposcope quotation from Franance.
Name OP-C2 or OP-C5, objective, binocular, light source, mount and imaging options, quantity, location and timeline. Franance will follow up by phone or email. Confirm package contents, delivery, warranty and support in writing.
Request an OPTOMIC quoteNeed an equipment quote?
Add the models you need to a quote order, or send us your equipment list.