Buy KaVo dental equipment and instruments
in Nigeria.

Where can I buy KaVo dental equipment in Nigeria?

Start with the KaVo product listing at Franance. For a treatment unit, browse the KaVo dental chair category. For instruments, use the KaVo dental instrument category or the filtered high-speed dental handpiece listings.

The current entries span two equipment groups. The ESTETICA E30 is a configurable treatment unit. The handpiece records cover EXPERTtorque E680 L, EXPERTtorque Mini E677 L, MASTERtorque M9000 L and MASTERtorque Mini M8700 L turbines, plus MASTERmatic M05 L and M25 L contra-angle handpieces. A model's presence in the category does not establish stock or fit for a particular chair. Verify connection, light, speed ratio and other technical requirements against the exact equipment already installed at your clinic.

Franance handles enquiries through a quote order rather than online payment. Add the required product or products, enter quantity and the full Nigerian destination, then describe the configuration. Franance can follow up by email or phone. Ask the offer to identify the exact KaVo reference, accessories, commercial terms, delivery scope and any requested setup or service separately.

What KaVo models are in the Franance listing?

The ESTETICA E30 treatment unit is a configurable chair and equipment platform. The instrument listings are separate portable items: a dental turbine or contra-angle handpiece does not include a dental treatment chair. In the high-speed category, EXPERTtorque E680 L and Mini E677 L are both listed, as are MASTERtorque M9000 L and Mini M8700 L. The broader instrument category contains MASTERmatic M05 L and M25 L.

KaVo's product pages distinguish these names by design and material number. The material numbers help procurement teams avoid confusing a lighted model with a non-lighted reference, a standard turbine with its Mini variant, or a 1:5 contra-angle with a turbine. Keep the full written model and number in purchase records. If the quotation proposes a different suffix or reference, compare the substitute against the approved instrument specification before accepting it.

For clinic-wide procurement, make a schedule with one row per unit, handpiece and accessory. Name the department or chair assignment, required model, quantity, connection, light or no-light requirement and any included coupling or related part. That simple schedule makes it easier to see if a quote covers the intended equipment mix rather than only the most recognizable KaVo family name.

How do EXPERTtorque E680 L and Mini E677 L differ?

Both entries are high-speed turbine handpieces, but they are not the same model. KaVo's EXPERTtorque family comparison lists E680 L with maximum power up to 29 W at 3.5 bar, a 13.6 mm head height and 12.5 mm head diameter. The Mini E677 L is listed at approximately 27 W at 3.5 bar, with a smaller 12.2 mm head height and 10.8 mm head diameter. The manufacturer also distinguishes their spray configurations: four-port on E680 L and three-port on E677 L.

KaVo identifies material number 1.006.8700 for E680 L and 1.007.3600 for E677 L. Its family table lists the MULTIflex LUX coupling system and states 25,000 lux light for E680 L; check current model documentation for the exact E677 L light details rather than inferring from the E680 L specification. The quoted reference should match the handpiece your clinic requested.

When replacing an existing turbine, give Franance the nameplate reference, connection type and any compatibility information from the chair or delivery unit. Ask whether the offer includes a coupling or any separately quoted component. Do not assume a smaller head, spray setup, light or performance figure is interchangeable between E680 L and Mini E677 L just because both belong to EXPERTtorque. The official KaVo EXPERTtorque comparison provides the family specifications for review.

How should I compare MASTERtorque M9000 L and Mini M8700 L?

The MASTERtorque pair are also distinct turbine references. KaVo's official comparison lists M9000 L at up to 31 W and M8700 L at up to approximately 30 W, both at 3.5 bar under the stated manufacturer conditions. M9000 L has a listed 13.1 mm head height and 12.5 mm diameter; the Mini M8700 L has a 12.1 mm head height and 10.8 mm diameter. The comparison lists different spray-port counts and separate model numbers: 1.008.7900 for M9000 L and 3.001.0000 for M8700 L.

Both models appear with KaVo MULTIflex couplers in the manufacturer table. It also describes a 100°/19° head-and-knee angle combination, Direct Stop Technology, ceramic bearings and up to 32 N retention force. Confirm which of those specifications applies to the quoted version and any regional suffix. Similar design features do not erase the difference in size, model code or configuration.

For procurement, compare the exact material number, head dimensions, light specification, spray configuration, coupling and required accessories. If the request is for the M8700 L Mini, keep “Mini” and the full number in the order line. If the clinic requires the M9000 L, do not accept a Mini substitution without a technical review by the clinic's responsible team. See KaVo's MASTERtorque product comparison before finalizing the preferred reference.

What is the difference between MASTERmatic M05 L and M25 L?

KaVo lists both MASTERmatic M05 L and M25 L as 1:5 speed-increasing contra-angle handpieces, but their head formats and material numbers differ. M25 L is reference 1.009.3630; M05 L Mini is 1.009.3640. KaVo describes M05 L as a Mini version and gives a small-bur shaft-length distinction in its product information. Both listings include light and filtration features in the family comparison, while spray details differ: M25 L uses a three-port spray and M05 L a one-port spray according to KaVo's product page.

The relevant check is not only “1:5.” Confirm the exact handpiece body, head size, bur requirements, light supply, connection and compatibility with the drive motor or dental unit. Ask Franance to quote M05 L Mini or M25 L by its full material number and to identify any coupling or other component included. A 1:5 ratio alone does not prove that two different references fit the same motor or match the clinic's required dimensions.

KaVo's MASTERmatic specifications list both references and their ratios. Use the product page and the current instructions for use to verify the offered instrument. This buying guide does not provide operating or reprocessing instructions.

What should I specify for the ESTETICA E30 treatment unit?

KaVo describes ESTETICA E30 as an individually configurable dental treatment unit. Its product page lists chair positions from 350 mm at the lowest position to 830 mm at the highest, maximum patient weight up to 180 kg and an optional ambidextrous arrangement. Those are manufacturer-stated points for the unit; the exact offered equipment list depends on the configuration selected.

Ask for a configuration schedule rather than a chair-only title. Identify the handedness or conversion requirement, chair upholstery, dentist and assistant elements, instruments or motor connections, treatment light, foot control, tray holders and any other options the clinic requires. KaVo's official page shows selectable equipment options and distinguishes standard from optional components. Franance's quotation should mark each requested item as included, optional or excluded and state the exact configuration reference.

Before approving a purchase, check room dimensions, delivery access, placement and utility requirements against current KaVo documents and the clinic plan. Provide doorway, corridor, lift and final-room constraints in the enquiry. Request confirmation of what is covered by delivery, installation, connection, commissioning, training and warranty; these terms are commercial offer details, not implied by the model page. Review the KaVo ESTETICA E30 product information with your project specification.

How do connection, light and material numbers affect a handpiece quote?

KaVo material numbers provide a precise way to distinguish similar names. The current references in Franance's range include 1.006.8700 for EXPERTtorque E680 L, 1.007.3600 for EXPERTtorque Mini E677 L, 1.008.7900 for MASTERtorque M9000 L, 3.001.0000 for MASTERtorque Mini M8700 L, 1.009.3640 for MASTERmatic M05 L and 1.009.3630 for MASTERmatic M25 L. Copy the material number from the instrument label or approved specification into the quote request.

For a turbine, state whether you need a lighted model, the existing coupling family, spray configuration and any required coupling or hose part. For a contra-angle, specify the ratio, full model, head format and drive connection. KaVo's family pages list MULTIflex for the turbine models and separate INTRA LUX handpiece/contra-angle features; the correct interface must be confirmed against the installed motor or delivery unit. A familiar connector name is not a substitute for checking the exact connection and supply configuration.

If replacing multiple instruments, list each chair and the current instrument reference separately. Ask the written offer to identify the quoted model and material number, manufacturer documentation, included accessories and any alternatives. This avoids mixing up E680 L with E680 C, or the standard M9000 L with Mini M8700 L. Request clarification if the proposed number does not match your specification.

What determines KaVo pricing, delivery and project scope?

The quote depends on the model, configuration, quantity, accessories and delivery destination. An ESTETICA E30 configured treatment unit is not directly comparable with a stand-alone turbine or contra-angle. Even within one instrument family, a Mini head, light configuration, coupling or material number can change the requested package. Ask for line items so the clinic can compare equivalent specifications.

For a chair project, include site access and the requested setup scope. For handpieces, identify any coupling, replacement part or compatible connection required. Ask Franance to state price and currency, validity period, payment terms, freight or other charges, delivery destination, estimated lead-time basis, included equipment, warranty conditions and exclusions in writing. Availability, delivery timing, regional configuration and any installation or service arrangement need confirmation on the individual proposal.

If the offered item is a substitution, require its full KaVo model and material number. Compare its features and fit with the original request before purchase approval. This is especially important where names differ only by a Mini designation, LUX/light suffix or ratio. The purchasing team should retain the reviewed quote and product documentation alongside its equipment schedule.

How do I request a KaVo quotation from Franance?

Browse the KaVo product listing, select the E30 unit or exact instrument, and add the requested item to the Franance quote order. Include the quantity, full reference, material number, relevant connection or unit requirement and complete Nigerian destination. For a chair, add the required configuration and site access details; for handpieces, add the current motor or delivery-unit information and any light or coupling needs.

Franance can review the quote order and follow up by email or phone. Ask the written proposal to show each model and number, included and optional components, price and validity, delivery terms, warranty and any requested project scope. Use the official KaVo product pages linked above to check model distinctions and share the exact specification with the procurement, dental engineering and practice teams before accepting the offer.