Buy IKA laboratory dispersers and inline systems
in Nigeria.

Where can I buy IKA dispersers in Nigeria?

Franance’s listings cover T 10, T 18, T 25 and T 50 dispersers, the UTL 25 inline system, and the T 25 easy clean digital Solution. Start with the exact model and identification number, then provide your laboratory’s required volume range, tooling, electrical supply, quantity and complete delivery address in Nigeria. For formal procurement, attach the technical schedule and identify the person who will review the proposed configuration.

Ask the quotation to identify the exact IKA model, voltage variant, included dispersing element, shaft, stand, clamp, charger or other accessories, documents and any requested support. Confirm availability, price, delivery, warranty and service terms in writing for your destination. Do not infer Nigerian supply or delivery terms from the manufacturer’s international product pages.

Franance follows up by phone or email after receiving the quote order. Compare the proposed scope with the model number and accessory schedule you submitted. If the selected element is a separate accessory, require it as its own identified line. The final offer should make clear whether the quote covers a motor unit alone or a configured solution with element and support hardware.

Which IKA products are listed by Franance?

Franance’s IKA range covers laboratory dispersers and homogenizers. Laboratory dispersers include T 10 basic (0003737001), T 10 battery (0020103418), T 18 brushless digital (0020103241), T 18 digital (0003720001), T 25 digital (0003725001), T 25 easy clean control (0025002501), T 50 digital (0003787001) and UTL 25 digital Inline (0010006857). The homogenizers and sonicators category contains T 25 easy clean digital Solution, 0010015162. These references span small-batch handheld models, benchtop units, a larger-volume disperser and an inline system.

The T 25 products have related names but distinct specifications and supplied scopes. T 25 digital, T 25 easy clean control and T 25 easy clean digital Solution are separate catalogue entries; compare their item numbers, controls, monitoring features and included accessories before choosing. IKA’s product information also describes different dispersing elements, so identify both the motor unit and required tool in the quote.

Browse IKA laboratory dispersers, homogenizers and sonicators, or all IKA products. A written quotation should repeat the model name and item number so your buyer can match it to the requested configuration.

How do I compare the IKA T 10 basic and T 10 battery?

Both T 10 records are small-volume dispersers with manufacturer-stated capacity up to 100 mL of water, but they differ in power arrangement and features. IKA lists T 10 basic 0003737001 with an 8,000–30,000 rpm speed range and a 0.5–100 mL H₂O working-volume range. Its dispersing tool is not included. T 10 battery 0020103418 is rechargeable and has an LCD, timer and counter; IKA lists USB-C or charging-clamp charging, and its dispersing tool is also separate.

For the basic model, include the required tool by item number and confirm the electrical version. For the battery model, specify the charging arrangement, expected accessory set and any additional tool. Do not treat the two as interchangeable simply because both carry the T 10 name. Ask Franance to list the instrument, element and charging accessories separately and identify any omitted components in the written offer.

Compare IKA T 18 digital and brushless digital dispersers

The T 18 digital 0003720001 and T 18 brushless digital 0020103241 share a listed 3,000–25,000 rpm range and water-based working volumes up to 1,500 mL. The T 18 digital page describes electronic speed control and electronic overload protection. The brushless digital version adds a brushless motor, digital speed setting, timer, quick coupling for tool changes and a USB interface according to IKA’s model information.

These differences matter when your equipment schedule specifies drive type, interface or documentation needs. Name the full model and item number, then identify the tool, vessel arrangement and any USB or monitoring requirements. Ask the quote to confirm whether a dispersing element is included and which one; do not assume both T 18 versions ship with the same accessories. Compare the current manufacturer data for the actual model before substituting between versions.

How should I compare the IKA T 25 models?

Franance lists three distinct T 25 entries. T 25 digital 0003725001 has a stated 1–2,000 mL water working volume, 3,000–25,000 rpm speed range and 800 W input. T 25 easy clean control 0025002501 has a similar stated volume and speed range, with temperature measurement and operation-time detection when used with the specified RFID tool, plus USB control/documentation features. T 25 easy clean digital Solution 0010015162 is listed with a 500 W input and includes an S 25 EC-C-25 G dispersing tool, R 1826 plate stand and R 182 clamp in the Franance product record.

The easy clean models and the standard digital model should not be substituted by series name alone. Identify whether temperature monitoring, RFID detection, USB documentation, the specified tool, stand and clamp are required. Ask the quotation to itemize the exact element and support package for the selected model. The manufacturer’s applicable technical data and offer should resolve differences in motor ratings, tools and regional scope.

What are the IKA T 50 digital and UTL 25 inline systems?

T 50 digital 0003787001 is the larger-volume laboratory disperser in Franance’s IKA range. IKA’s catalogue lists a maximum water working volume of 30 L and maximum speed of 10,000 rpm, with electronic speed control and compatibility with a range of dispersing elements. The UTL 25 digital Inline 0010006857 is a different system for inline circulation or flow-through processing. Its manufacturer-listed open-outlet delivery capacity is 4.4–11.6 L/min, and its modular unit is described as disassemblable and autoclave-compatible.

The UTL 25 page also states that the inline system is not self-priming and is not intended for continuous or cyclical continuous operation. Treat those as equipment-selection constraints to review with the manufacturer and your technical owner, not as a process recommendation. For either model, specify the installation arrangement, element or inline components, connection requirements, quantity and requested scope. Ask Franance to confirm the exact bill of materials and compatibility in writing.

What is the T 25 easy clean digital Solution?

IKA describes the instrument as a rotor-stator disperser for laboratory homogenisation. A rotor turns within a stationary stator, drawing the medium into the dispersing head and forcing it through openings at high speed. IKA describes its range as suitable for processes such as homogenising, emulsifying, dissolving or powder wetting, but application suitability depends on the sample, tool, vessel and operating conditions.

For item 0010015162, IKA lists a brushless DC motor, 500 W input and 400 W output, stepless speed setting from 3,000 to 25,000 rpm, digital LED display, timer and continuous-duty rating. The listed volume range is 1 mL to 2 L for water, and maximum viscosity is 5,000 mPa·s. These are manufacturer specifications under stated conditions; confirm suitability for the actual vessel and sample with IKA.

IKA lists dimensions of 89 × 270 × 161 mm for the instrument and a weight of 3 kg. It also lists a 160 mm extension arm, IP30 protection and Micro-USB interface. Check the product data and user manual for the exact offered version and its limits before use. The laboratory should select a dispersing element that matches its actual sample and process.

Which dispersing element should I quote with the T 25?

The element determines the rotor-stator geometry and is selected according to the medium, sample quantity, desired processing and cleaning requirements. IKA lists a range of T 25 and easy clean elements, including different diameters and configurations. The T 25 easy clean digital product family’s solution description may include a dispersing tool, stand and clamp in some regional product listings, while the technical page presents the model and accessory family. Confirm the exact package for identification number 0010015162 rather than inferring its contents from a regional page or product photograph.

Provide the sample type, approximate viscosity, working volume, vessel dimensions and any sterile, disposable, chemical-resistance or cleaning requirement to the laboratory equipment reviewer. Ask IKA or the supplier to confirm the element code and compatibility with the exact T 25 version. A broad label such as homogenizer tool is not sufficient to define the required accessory.

If you already have IKA tools, provide their product numbers and ask whether they are compatible with the easy clean model. For a new instrument, state whether the quote should include a dispersing element, shaft, stand, boss head clamp, cleaning tool or spare. Request each relevant item as a separate line with its own code.

What voltage does the listed IKA T 25 require?

The technical data page for the listed identification number 0010015162 shows a 100–120 V, 50/60 Hz version and says other voltage variants are available, including 220–240 V / 100–120 V. Confirm the exact input range and plug for the unit offered to your Nigerian facility. Do not assume the product number alone guarantees that the correct electrical variant will be supplied.

Provide the laboratory’s site voltage, frequency, outlet and protective-earth requirements. Ask the quotation to state the complete model identifier, nameplate characteristics, supplied plug and whether any additional electrical accessories are required. Have facilities or biomedical engineering staff confirm compatibility with the installation and any power-conditioning requirements.

If another voltage variant is proposed, ask for its product number and documentation to be named separately. Verify that the delivered unit label, quotation and instructions agree. Ask Franance to confirm current availability and electrical version for your destination in writing.

How should I compare T 25 performance specifications?

Compare the intended process with IKA’s stated speed, working volume, viscosity and duty specifications. The listed 3,000–25,000 rpm range and maximum 2 L H2O volume do not mean that every sample can be processed at the upper volume or speed. Viscosity, vessel size, element type and method affect performance. Ask your method owner to specify what must be achieved and whether the available element supports it.

Review motor input and output ratings, speed adjustment, interface, timer, ambient conditions and protection class alongside the working volume. If your process requires vacuum or pressure, IKA describes dispersing tasks in combination with a laboratory reactor; the standalone T 25 listing does not mean such a reactor or pressure accessory is included. Identify any reactor, vessel or service configuration separately and verify its compatibility.

Treat the manufacturer’s working ranges as equipment specifications, not as a recommendation for a particular material or process. Have the technical owner confirm the selected tool, vessel and model against the laboratory’s requirements and current IKA documentation.

What does easy clean mean for laboratory maintenance?

IKA’s product family uses a quick coupling intended to let the dispersing element be exchanged for cleaning and maintenance. The exact element design and cleaning procedure vary. Consult the current IKA manual and technical information for the particular element, including any limits on immersion, cleaning agents, sterilisation or wear inspection.

For shared laboratories, identify how tools are labelled, cleaned, stored and inspected between uses under the institution’s procedures. If a method requires disposable or sterile components, ask IKA or the supplier to confirm the compatible options, packaging and item numbers. The availability of a disposable or cleanable tool in a product family does not establish that it is included with the motor unit.

Ask the quotation to identify spare seals, cleaning tools or service parts if needed. Confirm maintenance and warranty conditions for the exact device and accessory. Do not infer that “easy clean” means maintenance-free or that any cleaning method is permitted. Retain the user manual and the institution’s own cleaning procedures with the instrument record.

What should I plan for T 25 bench setup and safety?

Check the stated instrument footprint, extension arm and required workspace against the laboratory bench and vessel arrangement. Identify the stand and clamp, their size and the stable support surface required for the intended use. Confirm whether the quote includes a plate stand, boss head clamp or other mounting item. A motor unit without its required support is not necessarily a complete working setup for your laboratory.

Have facilities staff review electrical supply, access, ventilation, noise, spill control and chemical compatibility against the planned equipment location. Use the current manufacturer instructions and institutional requirements when planning the setup.

If installation, training or application advice is requested, state the exact scope and ask which provider can deliver it, where and on what terms. The catalogue page does not establish local installation or application support in Nigeria. Confirm availability and responsibilities in the written quote before planning the project schedule.

What affects IKA equipment price and delivery in Nigeria?

The quote depends on the exact instrument identification number, voltage version, element, stand, clamp, other accessories, quantity, destination and requested services. Ask for the motor unit and each tool or accessory to be itemised. Confirm taxes, currency, quote validity, payment terms, delivery charges and any warranty or service conditions in the written proposal.

Compare quotations with the same configuration. A price for the motor alone is different from a configured solution with element and stand. Different T 18 or T 25 variants have distinct technical features and item numbers; the T 50 and UTL 25 also use different equipment formats. Ask for any substitution to be identified by its exact model and item number and reviewed against the approved requirement.

Franance accepts quote orders and follows up by phone or email; online checkout is not available. Confirm current availability, delivery, warranty and service terms for your specific destination in the written offer.

What documents should I request before ordering?

Request current IKA technical data, the operating manual and scope-of-delivery list for each selected model and dispersing element. Ask the quotation to state the complete model, item number and electrical version. If your quality system requires IQ/OQ documentation, calibration or another certificate, list it explicitly and confirm availability and scope; do not assume it is included in the base instrument offer.

For a method-sensitive or regulated laboratory, have the quality and technical reviewers determine what evidence they need for acceptance. Confirm user access, installation or training responsibilities and any software or USB interface requirements. Keep manuals, quote, item numbers and receiving records together so the instrument and accessories can be tracked accurately.

IKA provides regional product pages and downloads, but the applicable documents and supply terms should be checked for the actual offered configuration. No Nigerian regulatory approval, local registration or warranty arrangement is established by this catalogue guide.

How do I request an IKA quotation from Franance?

Send the exact IKA product name and identification number, electrical version, required working range, dispersing element or inline system components, other accessories, quantity, laboratory location and requested timing. Attach the technical schedule and identify the technical reviewer and procurement contact. Ask the written offer to state the model, electrical version, complete scope, documentation, availability, price, delivery, warranty and any requested support.

Use the IKA laboratory disperser listings, homogenizers and sonicators category, or all IKA products to identify the relevant listing. Franance will follow up by phone or email to clarify the quote order. If the project requires tools or accessories, specify their item numbers or request a compatibility review separately.

Before approval, have laboratory and facilities staff confirm that the selected dispersing element, voltage and accessories match the institution’s requirements. The quotation should describe exactly what is being supplied. Request an IKA quote order from Franance when the model schedule is ready.