Buy Human Care Barton convertible patient transfer chairs
in Nigeria.

Where can I buy Human Care Barton chairs in Nigeria?

The current Franance catalogue groups all four models in one Human Care convertible chair listing. Browse that filtered page for the H-250, I-400, I-400X and I-700 product cards, or open all Human Care listings. The Human Care brand page has the overall brand section and buying guidance.

For a quotation, send the exact model or describe the transfer workflow, quantity, facility type, user capacity requirements, accessories and full destination. State whether the chair is for homecare, a ward, rehabilitation, intensive care or another setting. Include doorways, bed heights, storage and turning-space limitations that may affect transfer planning. If your team uses a tender or equipment schedule, attach the relevant non-confidential specification and identify mandatory requirements separately from preferences.

Franance handles enquiries as quote orders, not online checkout. A team member will follow up by phone or email to clarify the equipment and commercial terms. A manufacturer product page does not confirm availability in Nigeria or establish that Franance is an authorised local distributor. Ask the written quotation to state the exact model, supplied configuration, accessories, delivery and any service requested.

Which Human Care Barton convertible chair models are listed?

Franance currently lists four products in the same brand-filtered category listing:

- H-250 (B1002-BL): Human Care describes this as its smallest Barton convertible chair and a model suitable for home use. Its catalogue gives a safe working load of 113 kg / 250 lb.
- I-400 (B1041-TS-GEL): described for institutional care, with a published safe working load of 181 kg / 400 lb.
- I-400X (B1042-TS-GEL): an institutional variant with height adjustment and forward tilt; the published safe working load is 181 kg / 400 lb.
- I-700 (B1071-TS-GEL): the higher-capacity I-series configuration, with Human Care publishing a safe working load of 318 kg / 700 lb.

These figures and product roles are drawn from Human Care’s convertible chair range, I-700 product page and its product catalogue. The catalogue is dated 2021, so verify current specifications and product availability against current manufacturer documentation and the specific quotation. Safe working load is a device rating, not a patient assessment or a recommendation to select a chair by weight alone.

How do I choose between H-250, I-400, I-400X and I-700?

Start with the care pathway and facility needs, not only the model name. Ask clinical staff and biomedical engineering to identify whether the primary need is bed-to-chair transfer, repositioning, seated mobility or a combination. Document patient assessment, staff workflow, frequency of use, intended location and existing handling equipment. A home environment may have different space constraints from an acute-care ward. A higher capacity model must still match the specific user, room and transfer process.

The manufacturer positions H-250 for compact homecare settings and the I-series for institutional care. The I-400X adds height adjustment and forward tilt compared with the basic I-400 product description. Human Care describes I-700 as a higher-capacity option. These distinctions can help structure an enquiry, but the final choice should be validated with the model’s current instructions, dimensions, weight rating, accessories and local use requirements. Do not infer dimensions, seat functions or package contents from a product photograph.

For procurement, identify the exact model code alongside its family name. State whether staff need tilt, height adjustment, a specific transfer orientation, head or foot supports, cushions or belt accessories. Provide doorway, turning-circle, bed and storage dimensions. Ask the supplier to confirm the chair’s overall width and length in each relevant position, floor clearance, caster arrangement and whether the unit can be moved through the facility route. Confirm the relevant safe working load against the offered product and facility protocol.

What accessories and transfer systems are available?

The Human Care product range includes accessories that can be specified with a convertible chair, but do not assume they are included in the base product. Human Care describes a Patient Transfer System designed to support supine transfers between the chair and a bed or stretcher, with model-specific versions. Human Care also describes a Quick Release Belt for positioning, and notes compatibility with Barton H-250, I-400, I-400X and I-700 chairs. The exact article number and chair-specific configuration should be confirmed.

In your request, list any transfer system, belt, cushion, cover, head support, footrest, tray, or other attachment as a separate line. State the model that it must fit and the quantity. If the accessory is needed to meet a tender requirement, quote that requirement directly and ask Human Care or the supplier to confirm compatibility. Accessories for one chair family should not be assumed compatible with every variant without current documentation.

For a Patient Transfer System, explain the bed and stretcher models it will work with, the transfer direction, space available and whether the facility expects a chair-and-transfer-system package. Ask the quotation to identify the exact PTS model and supported combinations. A published statement that the system works with many beds and stretchers does not prove compatibility with a particular bed at your site.

What should a facility check before ordering a Barton chair?

Assess the physical route and clinical process. Measure the room entrance, lift and corridor clearances, turning areas, storage location and the space required to convert the device. Compare relevant chair dimensions with the beds and stretchers used in the facility. Identify the transfer points and how staff will position the chair, access the user and manage cables, supports or other nearby equipment. Have the clinical team determine whether the conversion and positioning functions meet the care protocol.

Review the patient capacity, transfer method, seating support, tilt or recline requirements and any special positioning needs with qualified staff. Verify safe working load and accessory compatibility against the exact model and current manual. Plan staff training and competency according to the manufacturer's instructions and facility policy. Do not treat a product page as training or use it to replace an individual risk assessment.

For an I-series chair in an acute-care environment, include intended departments, frequency, hygiene and cleaning process, electrical or powered options if specified in the current model, maintenance responsibilities and any bed-to-chair transfer equipment. For an H-250 at home, verify that the compact dimensions still work with the home layout and caregiver workflow. If a chair will serve more than one unit, provide the route and storage requirements for each location.

What affects Human Care chair prices in Nigeria?

The quotation depends on model and configuration, required safe working load, accessories, transfer system, quantity, destination and requested delivery, assembly, training or other project scope. A chair-and-transfer-system package is different from a chair alone. The I-400, I-400X and I-700 have different functions or capacity ratings, so compare offers that include the same model and accessory schedule.

Franance does not quote a single brand-wide online price. Ask for a written offer showing the product code, model, accessories, quantity, exclusions, currency, taxes, payment terms, quote validity, delivery charges and lead time. If you request installation, orientation or after-sales support, ask whether it can be provided at your site, who is responsible and what costs apply. Do not assume warranty, technical service, training or shipping is included because the manufacturer describes a global product or service portfolio.

For a procurement comparison, use the same equipment schedule for every supplier. Record substitutions explicitly and ask the clinical and biomedical reviewers to approve any changed function or model. Compare the full delivered scope and written commercial terms rather than a device-only headline amount.

Can Franance deliver Human Care chairs to locations across Nigeria?

Include state, city, complete address, facility name, receiving contact and requested delivery window. For a hospital, note loading access, lift size, floor level, receiving hours and routes from the loading area to the point of use. For a homecare delivery, state access restrictions and the person coordinating receipt. For multiple destinations, assign chair models and quantities to each address.

Franance can review a quote enquiry for a Nigerian destination, but product availability, shipping route, lead time, charges, warranty and technical service are not confirmed simply because an item appears in the catalogue. Request confirmation in writing for the specific model and location. If the project needs training, assembly, maintenance or commissioning, include that request separately and confirm the scope before ordering.

What information should I send with a Human Care quote request?

Provide the Barton model and article number, quantity, facility type, care workflow, required capacity, dimensions or room plan, transfer system and accessory schedule, existing bed or stretcher references, requested delivery date and complete address. Identify the clinical or biomedical contact who can confirm technical questions and the procurement contact who will review the offer. If you are comparing options, state what is fixed and what can change.

Ask Franance to list each model, its full code, configuration, included accessories, separate transfer-system items, exclusions, delivery, requested service and commercial terms. Confirm current manufacturer documentation, safe working load, dimensions and compatibility for the model actually offered. This creates a reviewable quote order and avoids relying on a product-family label.

How do I request a Human Care chair quotation from Franance?

Open the Human Care Barton chair listing to review H-250, I-400, I-400X and I-700. Then use the Human Care enquiry form to send your chosen model, use case, capacity, accessories, quantity and facility destination.

Franance will contact you by phone or email to discuss the requested quote order. Review the final model and configuration with clinical and biomedical staff, and ensure delivery, warranty and service terms are stated in the offer. Human Care’s product materials explain the manufacturer’s range; your written quote confirms what can be supplied and under what conditions for your Nigerian facility.