Buy GCE Medical medical oxygen equipment in Nigeria.
Browse GCE M50 oxygen concentrators and MEDISELECT II cylinder regulators listed by Franance. Specify the oxygen source, regulator reference, outlet standard and accessories required, then request a quotation for your facility.
GCE Medical listings in this department are the M50 Stationary Oxygen Concentrator and MEDISELECT II Oxygen Cylinder Regulator 0720223. Compare the equipment types and specify whether your enquiry concerns concentrator supply or a cylinder regulator.
The GCE Medical products listed here are the M50 Stationary Oxygen Concentrator and MEDISELECT II Oxygen Cylinder Regulator, reference 0720223. Review each model record and match the requested device to the oxygen source and interface specified by your facility.
Name the M50 or MEDISELECT II reference, source and connection standard, electrical requirements or cylinder interface, accessories, quantity and location. Request confirmation of model and included components in Franance’s quotation.
Franance lists the GCE M50 Stationary Oxygen Concentrator in this category. Review the product record and have the responsible clinical team confirm the required flow category and electrical configuration.
Provide the M50 model reference, required flow specification, electrical version, requested accessories, quantity and destination. Ask Franance to confirm the quoted unit and supplied package.
The listed GCE regulator is the MEDISELECT II Oxygen Cylinder Regulator 0720223. Check its product record and specify the cylinder and outlet interface required by the oxygen system.
Send reference 0720223, cylinder valve and outlet connection standards, required flow or gauge configuration from your specification, accessories, quantity and location. Ask Franance to identify the exact regulator configuration in the quotation.
Provide the product reference, oxygen source and outlet connection standard, electrical or cylinder setup, required accessories, quantity and destination. Ask Franance to identify the selected item and configuration in the quotation.
GCE Medical’s catalogue includes hospital gas manifolds such as the Duplex PNP50 two-stage gas manifold and the MC25 gas manifold. Review the listed models and request a quotation for the required medical-gas supply configuration.
GCE Medical lists Duplex PNP50 and MC25 gas manifold models within its medical-gas equipment range. Their exact system role and configuration should be selected against the facility design and current manufacturer documentation.
For a manifold quotation, identify the model, gas service, supply arrangement, connection requirements, quantities and destination. Ask for the current technical documentation and confirm the proposed system components and site scope in writing.
The GCE Duplex PNP50 is identified as a two-stage gas manifold, while the GCE Group MC25 is listed as a gas manifold. Review the models in the filtered catalogue and request a quotation matched to the facility gas-system specification.
Name the PNP50 or MC25 model, gas service, supply layout, required connections, quantity and installation destination. Confirm exact pressure, capacity and included components from current technical documentation; these details are not inferred from the model name.
Provide the gas system design basis, gases, supply arrangement, model references, quantities and facility destination. Confirm the specific manifold configuration, compatible components, technical documentation and installation scope for the project before ordering.
Buy GCE Medical oxygen equipment in Nigeria: M50 concentrator and MEDISELECT II guide
Request a quotation through Franance for the GCE Medical products currently listed in Nigeria: the M50 stationary oxygen concentrator and MEDISELECT II oxygen cylinder regulator article 0720223. Identify which equipment you need, its application, the exact electrical or cylinder connection, quantity and destination. Franance accepts quote orders and follows up by phone or email. The website does not take payment online.
These products solve different equipment requirements. GCE describes the M50 as a stationary oxygen concentrator using PSA technology, with oxygen delivery up to 5 L/min. GCE describes MEDISELECT II as a high-pressure medical-gas cylinder regulator; the assigned 0720223 variant is listed for oxygen with a PIN INDEX inlet and 0–25 L/min flow range. Do not treat the regulator and concentrator as substitutes or assume that either matches a facility’s system without technical review.
Where can I buy GCE Medical oxygen equipment in Nigeria?
Send Franance a quote order naming the product and exact reference: M50 concentrator with the required plug configuration, or MEDISELECT II article 0720223 regulator. Include quantity, facility application, city and state, procurement date and technical contact. Attach a specification or tender schedule if one applies, and identify the mandatory connection, electrical and documentation requirements.
Ask the quotation to confirm the exact product configuration, included accessories, supply documents, commercial terms and delivery scope. For M50, identify the voltage and plug. For MEDISELECT II, identify the cylinder valve, gas, pressure and outlet connection. Confirm current regional availability, documentation, price, delivery, warranty and service in writing; no Nigerian stock or fixed service arrangement is established by the catalogue page.
Franance follows up by phone or email after receiving a request. Clarify whether technical review, setup, training or maintenance is requested and ask for each activity to be separately described. The final offer should identify the supplier, equipment reference and responsibilities before the organisation places an order.
Which GCE Medical products are listed by Franance?
The current GCE brand assignments include two products. The M50 stationary oxygen concentrator appears in the oxygen concentrator 5 LPM category. The MEDISELECT II article 0720223 appears in the oxygen cylinder regulator category. Each category page can be narrowed with its matching model query to show the assigned product. These are the only listed GCE products covered by this guide; they do not represent the whole manufacturer portfolio.
GCE Medical and GCE Group sources describe these product families, but the specific commercial offer, configuration and regional availability still require confirmation. For the concentrator, the assigned record refers to configuration 304053021, which the catalogue identifies with a UK plug. The regulator record identifies an oxygen variant with a PIN INDEX inlet and 9/16 outlet. Confirm those details against the current quotation and exact product documentation.
Use the GCE Medical brand page and the separate filtered category listings to review M50 and MEDISELECT II independently. A query for each model narrows the category page to the intended reference. If your facility needs a different M50 electrical version, a different cylinder connection or another GCE model, state its exact code separately rather than assuming the listed variants can be changed without confirmation.
What does the GCE M50 oxygen concentrator provide?
GCE describes the M50 as a stationary concentrator that uses pressure swing adsorption (PSA) technology to provide oxygen delivery up to 5 litres per minute. Its product page lists continuous flow and an oxygen concentration range of 87–96 percent. GCE also lists integrated oxygen sensing, a no-flow alarm and low-oxygen-purity alarm. Confirm specifications for the exact regional version being offered.
The manufacturer’s page lists dimensions of 600 × 390 × 230 mm, weight of 15.2 kg, operating temperature of 10–37°C and a 230 V / 50 Hz version with average power consumption of 300 W. Its page also lists a 120 V / 60 Hz configuration. The Franance assignment specifically names a UK-plug configuration reference, so the facility should confirm that the proposed plug, voltage, frequency and electrical protections match the installation location and applicable standard.
The concentration figure and flow capacity are manufacturer specifications, not a recommendation for patient use. The clinical team and responsible biomedical personnel must determine whether the equipment is appropriate for the intended service and confirm site readiness. This guide does not provide oxygen therapy directions or assert clinical suitability for any patient.
Which electrical and plug configuration should I specify for the M50?
Provide the facility’s electrical supply characteristics, outlet type, protective earth requirements and intended installation location. The assigned configuration reference 304053021 is identified as a UK-plug version, while GCE publishes power information for 230 V / 50 Hz and 120 V / 60 Hz variants. Do not assume the UK plug or a voltage label alone guarantees compatibility with every Nigerian facility or existing power arrangement.
Ask Franance to have the proposed full model and electrical configuration confirmed in writing, including rated voltage, frequency, power, plug and any required accessories. For installations with generator backup, voltage regulation, UPS or other power conditions, provide the site specifications to the facility engineer and supplier for review. Ask what operating conditions and maintenance checks the current instructions require.
Confirm that the proposed configuration, label and user documents match the equipment delivered. If the facility requires a different plug or supply, state that requirement before quotation acceptance and ask whether the exact alternate version can be supplied. No local adaptation, conversion, stock or Nigerian electrical certification is assumed from this catalogue listing.
What accessories and maintenance items should I quote with the M50?
GCE lists accessories and service parts for the M50, including a humidifier, bacteria filter, air filter and paper filter. It also lists several replacement components such as a vent cover and filter access parts. Ask the quotation to identify which accessories are included in the proposed package, which are optional and which are replacement parts. Do not treat every accessory shown on the manufacturer page as standard supply.
Specify quantities and product codes for initial accessories or spares. Confirm compatibility with the exact M50 version and intended facility process. If the facility expects recurring filter changes or other maintenance, request the current manufacturer schedule, compatible references and any relevant service terms. The equipment owner should assign responsibility for inventory and planned maintenance under the institution’s own procedures.
For humidifier or other patient-circuit accessories, have the clinical and biomedical reviewers establish the appropriate configuration and confirm cleaning, replacement and compatibility requirements from current instructions. The presence of an accessory in the product family does not establish that it is included or suitable for every use case. Keep the proposed package and maintenance material list in the purchasing record.
What is GCE MEDISELECT II article 0720223?
GCE describes MEDISELECT II as a high-pressure regulator for medical gas cylinders equipped with a medical cylinder valve. The product family includes a flow selector, a rotating pressure gauge and a swivelling outlet. GCE describes features such as lateral and frontal flow reading and multiple selectable flow-range variants. The assigned Franance reference is article 0720223, listed for oxygen.
The current product assignment records the 0720223 variant with a 0–25 L/min range, PIN INDEX inlet, 9/16 outlet and 200 bar inlet pressure. GCE’s general family page lists multiple flow scales and outlet connection options. Those family-level alternatives should not be conflated with the exact article. Ask for the current manufacturer variant document and the exact quotation to identify the offered configuration.
Before purchasing, give the supplier details of the cylinder valve and the equipment or tubing that will connect to the regulator. The facility’s biomedical and oxygen-system personnel must confirm the gas, pressure and interfaces. A regulator with a familiar family name can still have an incompatible inlet or outlet, and this guide does not supply clinical flow-setting advice.
How should I check cylinder inlet and outlet compatibility in Nigeria?
Provide the cylinder valve standard and a clear product reference or technical drawing to the reviewer. The assigned 0720223 configuration is listed with a PIN INDEX inlet and 9/16 outlet. GCE states that inlet connections are according to national standards and publishes multiple outlet options across the family. This means the matching interface must be confirmed for the actual cylinder and downstream equipment, not guessed from the brand or intended gas.
Specify the required gas, cylinder pressure, inlet connection, flow range and outlet. Ask the quotation to name the article number and every connection. If a facility uses several cylinder types or oxygen delivery systems, map the intended regulator to each equipment group and state the quantity per connection. Do not request adapters or modifications without approval from the responsible equipment professional and applicable manufacturer instructions.
Have receiving staff compare the delivered item’s label and connections with the approved purchase schedule. Request the product instructions and any applicable conformity or inspection records. No statement about compatibility with all Nigerian cylinders, local standard compliance or approval is made here; technical confirmation is required for the actual interface and current jurisdictional requirements.
How do I choose between an oxygen concentrator and a cylinder regulator?
The M50 concentrator and MEDISELECT II regulator serve different functions. GCE describes the concentrator as equipment that produces oxygen from ambient air through PSA technology, while the regulator controls flow from a medical gas cylinder. Your facility should have its clinical, biomedical and medical-gas system professionals determine which equipment matches the intended setup and the institution’s approved supply plan.
The choice depends on the existing source, operating environment, required interface, maintenance capabilities, power conditions and service plan. A concentrator requires an appropriate electrical configuration and site conditions. A cylinder regulator requires a compatible cylinder valve and downstream connection and depends on the appropriate medical-gas cylinder supply. Do not infer comparative clinical performance, cost or suitability from the category labels alone.
If your project includes both types of equipment, specify each as a separate line with its own model, quantity, accessory schedule and destination. Ask for independent quotations and documentation so the equipment’s purpose and responsibilities are clear. This guide is a purchasing aid, not medical treatment or oxygen-system engineering advice.
What affects GCE equipment price, delivery and warranty in Nigeria?
The quote depends on the exact product, configuration, plug or connection, accessories, quantity, requested documents, delivery location and any technical services. Ask Franance to itemise equipment and accessories and identify currency, taxes, quote validity, payment terms, delivery and warranty. For M50, confirm the regional electrical version. For MEDISELECT II, confirm the article, gas and connection interfaces.
Compare proposals only after verifying they cover the same model reference and configuration. A concentrator without the accessories or replacement material your facility needs is not the same package as one that includes them. A regulator with another inlet or flow variant is not equivalent to article 0720223. Ask the supplier to document any substitution and technical difference for review.
There is no universal Nigerian price, delivery timetable, stock position or warranty term stated here. Franance accepts quote orders and follows up by phone or email; payment is not taken through online checkout. Confirm availability, destination-specific delivery, warranty terms, service provider and exclusions in the written offer before approval.
What documents should I request before ordering GCE oxygen equipment?
For the M50, request the current product datasheet, user instructions, electrical configuration and accessory compatibility list. Confirm the model code and version, including plug and voltage. For MEDISELECT II 0720223, request the variant list or product data confirming gas, inlet pressure, PIN INDEX inlet, outlet thread and flow range. Ask for current documentation relevant to the exact item offered.
If a tender needs regulatory or conformity evidence, list the exact document and jurisdictional requirement. A manufacturer statement about compliance in one region does not automatically establish Nigerian approval, facility acceptance or product registration for a particular transaction. Have procurement and technical reviewers check the exact records supplied.
Ask the quotation to specify installation or service responsibilities, if any. The presence of product manuals and accessory lists does not establish that commissioning, training or maintenance is included. Retain the final quote, model documents, delivered-item records and facility acceptance information together.
How do I request a GCE Medical quote from Franance?
For an M50 request, provide the required oxygen concentrator capacity, exact plug and electrical supply, accessories, quantity, destination and facility contact. For MEDISELECT II, name article 0720223 and state the cylinder valve, inlet, flow range, outlet and intended equipment interface. If requesting both, keep the two item schedules separate.
Use the filtered GCE Medical oxygen-concentrator and cylinder-regulator pages to review the two current product assignments, and query M50 or 0720223 to identify the exact catalogue item. Franance follows up by phone or email after receiving the quote order. Ask the written proposal to confirm exact references, configuration, availability, price, delivery, documentation and requested warranty or service terms.
Before approval, have the responsible biomedical, clinical, facilities and procurement staff review the exact equipment and interfaces. Franance can discuss the request, but only the confirmed offer establishes what is being supplied and under which terms. Keep the exact product codes in the purchase order and receiving checklist.
Common questions
Can I buy GCE oxygen products online in Nigeria?
No. Franance accepts quote orders and follows up by phone or email to clarify the product, configuration and proposed terms.
Is the listed M50 plug suitable for every Nigerian facility?
The assigned reference is identified as UK plug. Confirm the exact voltage, frequency, plug and facility electrical requirements before ordering.
Does MEDISELECT II 0720223 fit every oxygen cylinder?
No such universal fit is claimed. Confirm the cylinder valve standard and downstream connection for the actual equipment.
Are the M50 accessories included?
Confirm which accessories and quantities are included in the written quote; manufacturer family listings show options and replacement items.
Does Franance confirm GCE delivery or service across Nigeria?
Provide the facility city and state and request delivery, service and warranty terms for the specific quotation.
Request a GCE Medical oxygen equipment quotation.
Name the M50 or MEDISELECT II article, configuration, facility interfaces, quantity and destination. Franance will follow up by phone or email to clarify the quote order.
