Buy Mindray HS50 Insufflator in Nigeria
Buy the Mindray HS50 insufflator in Nigeria through Franance. Request the unit, compatible accessories and supporting requirements your facility has approved, with quantities and delivery location included. The HS50 is separately identified in Mindray's HD3 equipment overview; it is not the camera system, light source or monitor. This guide helps your purchasing and engineering teams define a component enquiry or a wider laparoscopy equipment package without assuming that the device alone includes every connection, consumable or service needed at the site.
Where can I buy a Mindray HS50 insufflator in Nigeria?
Request an HS50 quotation from Franance with your approved equipment specification, quantity and destination. Include whether you need a new insufflator, a replacement for an existing installation or the insufflation component of a wider theatre-equipment purchase.
Franance can discuss the requested device alongside accessories, delivery and any proposed technical work. Identify the team responsible for reviewing the equipment and provide relevant existing-system references. A clear component schedule helps distinguish the main-unit requirement from the connections and additional items your facility expects to receive.
If your enquiry follows a tender, send the numbered schedule and documentation requirements at the start. Ask the proposal to identify the actual model and configuration being offered. The manufacturer range page provides a useful product reference, but the accepted quotation must describe your specific supply. An enquiry through this catalogue starts a discussion; it does not reserve stock or take an online payment.
Which HS50 specifications should a Nigerian buyer review?
Review the actual offered HS50 version against the technical requirement your institution has approved. Ask Franance for the applicable product information and an itemised response where the purchase follows a compliance schedule.
Mindray's published HS50 description gives a maximum flow reference of 50 litres per minute and a seven-inch touchscreen. These are equipment characteristics for procurement comparison, not operating recommendations. Your team should review the required functions, supported accessories and applicable instructions for the exact proposed device rather than use a headline maximum as a clinical setting.
Keep essential requirements separate from preferences when preparing the schedule. If heating, smoke-management functions or particular interfaces are required, identify them explicitly and ask how the proposed configuration addresses them. Request supporting information for the actual equipment offered. This lets reviewers compare the device and accessory scope between proposals without treating every feature associated with a wider manufacturer series as a guaranteed function of every supplied version.
| Equipment question | Identify for review |
|---|---|
| Equipment role | Laparoscopy insufflator; separate from the camera system |
| Published flow reference | Manufacturer maximum 50 L/min; not an operating recommendation |
| User interface | Manufacturer-described seven-inch touchscreen |
| Function review | Required heating and smoke-management arrangement and accessories to specify |
What gas-supply and connection information should I send?
Give Franance the facility's approved gas-supply arrangement and ask for the HS50 inlet requirements and compatible connection equipment to be identified. Your engineering team should review the actual site and device documentation before supply is agreed.
Do not assume that an existing hose, regulator or connector is suitable because another insufflator was previously used in the room. Provide the relevant manufacturer references and photographs of equipment identification where useful. The proposed connection schedule should make clear what is retained, what is newly supplied and what requires further review.
If your purchase forms part of a new theatre installation, include the planned equipment position and the team responsible for the gas infrastructure. The insufflator quotation should distinguish device supply from site work and any separately required connection equipment. Franance can discuss those commercial and technical requirements together, while the responsible facility reviewers determine the approved installation arrangement. This guide does not prescribe gas pressures, delivery settings or procedures for connecting or operating the device.
Which tubing and consumables should accompany an HS50 order?
Ask for the compatible tubing, filters and other required accessory references to be listed with quantities. Tell Franance whether the enquiry covers an initial equipment package, replacement supplies or a recurring requirement for an installed HS50.
A main-unit quotation should not leave essential accessory identification unresolved. Request the format, pack size and quantity for each proposed consumable, together with the applicable manufacturer information. If you already use the equipment, provide the references from existing accessory packaging rather than relying only on a generic description.
Your facility should review whether each item is single use or reusable and follow its own applicable instructions and approved handling process. Do not assume that a tube or filter suitable for another device belongs in the HS50 configuration. Include anticipated quantities for the purchasing period your institution is considering, but keep that commercial estimate distinct from clinical operating decisions. Franance can prepare the accessory requirement alongside the equipment so the receiving team has a defined schedule to check.
How should HS50 heating and smoke-management requirements be quoted?
State the required heating and smoke-management functions in the enquiry, and ask Franance to identify the proposed configuration and supporting accessories. The manufacturer description discusses both functions, but the equipment and consumable schedule still needs review for your actual purchase.
Ask which accessories and connections are required for the requested arrangement and whether they are included in the proposal. If your theatre already uses separate smoke-management equipment, describe that installation so the responsible team can assess the intended role of each device. Do not assume that naming a function establishes compatibility with every existing accessory or replaces another device in the room.
Where a demonstration or technical review is requested, agree its scope before the purchase. Your reviewers can assess the equipment functions against the approved schedule and applicable instructions. Franance can include the requested review or familiarisation work in the proposal. The product description should not become a promise of a particular clinical outcome, exposure reduction or procedure-specific performance.
Does the HS50 include a laparoscopy camera system or instruments?
No complete camera or instrument package should be assumed from an HS50 enquiry. Request the insufflator as an identified device, then list any camera system, optics, display, illumination, instruments and equipment support your facility also needs.
Mindray presents HS50 alongside HD3 on a system overview page. That association helps identify its equipment role, but it does not make all illustrated components a single included kit. If you need a complete tower, ask Franance to organise the equipment schedule with separate references and quantities for each part.
For an existing installation, explain what equipment remains and what is being replaced. The proposed insufflation arrangement and the proposed imaging arrangement should each be reviewed by the responsible team. A shared manufacturer name is not a substitute for checking the actual components and intended installation. Itemisation makes the quotation easier to compare and avoids paying for an unexplained package that may include less or more equipment than your facility needs.
What mounting and power requirements should I review for HS50?
Identify the planned equipment position, support hardware and power arrangement for the HS50. Ask Franance to provide the relevant requirements for the offered unit so your facility engineer can assess the proposed setup.
If the device will share a cart with imaging equipment, include the other components in the arrangement review. Ask about the actual shelf or mount, equipment load, connection access and routing of cables and tubing. A tower photograph does not establish the suitability of a different cart already owned by the facility.
For a replacement, provide information about the existing support and connections, including any constraints that affect the installation. For a new room, identify who will prepare the space and arrange any additional infrastructure. The quotation should separate equipment, mounting accessories and technical work. Agree these responsibilities before a delivery or installation visit is scheduled so the receiving team knows what must be ready and which items it is expected to provide.
What is the Mindray HS50 price in Nigeria?
Request a current HS50 price from Franance for the exact unit, accessory schedule and quantity you need. Include the destination and any installation, familiarisation or support requirement so the quotation addresses the full proposed supply.
Compare the main unit and accessories separately when assessing different offers. Check the proposed version, included tubing and filters, connection equipment and any mounting hardware. A lower total can reflect a different accessory quantity or a scope that leaves site work and delivery to the buyer. Ask each proposal to respond to the same approved requirement.
Request quotation validity, proposed availability, delivery arrangements, warranty and payment terms in writing. Manufacturer information establishes the product reference; it does not establish current Nigerian stock or a fixed local price. Franance will contact you about the actual enquiry and proposed commercial terms. Your institution should approve the equipment schedule and resolve remaining technical questions before proceeding with the purchase.
What documents and handover should I request with an HS50?
Ask for the applicable product information, instructions and component schedule needed by your institution. Tell Franance which tender or purchasing documents are required, and include any proposed installation checks or operator familiarisation in the enquiry.
The receiving team should be able to match the supplied model and accessory references against the accepted quotation. Agree who will review the site connections and which equipment checks will be completed before handover. The work should follow the relevant instructions and your facility's approved procedures rather than a generic online setup description.
Retain the equipment identification, accepted configuration, service contacts and supplied documents with the asset record. Ask the proposal to state the responsibilities for maintenance enquiries and any agreed support work. Clear records are particularly useful where the insufflator sits beside equipment with different care instructions and commercial terms. Do not assume that the camera system, tubing and insufflator all carry the same maintenance requirements or warranty scope simply because they were purchased together.
Can Franance discuss HS50 delivery outside Abuja?
Yes. Send the facility name, full address, city and state with your HS50 requirement. Franance can discuss delivery and any requested technical visit for Lagos, Port Harcourt, Ibadan, Enugu, Kano and other Nigerian destinations.
Explain whether you need the device supplied independently or delivered with a larger equipment schedule. Give the receiving contact and any building-access restrictions, and identify whether the site is ready for the agreed installation work. Separate packed accessories should be included in the receiving plan so quantities can be checked against the quotation.
If your project has an intended opening date or a planned equipment changeover, discuss that timetable at the enquiry stage. Ask for the proposed delivery timing, charges and responsibilities to be confirmed for the actual destination. A national catalogue route does not imply stock in every state or a guaranteed arrival date. The practical arrangement depends on the equipment and services agreed for your facility.
How do I prepare an HS50 quote order in Nigeria?
Add the Mindray HS50 to your quote order and specify the quantity, approved equipment requirement, accessory schedule and delivery location. Include your contact details and any existing installation information Franance needs to discuss the proposed supply.
State whether you want a new unit, a replacement arrangement or a device supplied as part of an endoscopy tower package. Identify the site-connection review, documentation, installation or familiarisation you want considered. If you need replacement tubing or other supplies, give their exact references and quantities as separate requirements.
Franance will follow up by phone or email about the equipment and quotation. Review the final model and accessory list, applicable documents, price and commercial terms with the responsible teams. Confirm the site responsibilities before an order is agreed and keep the accepted schedule for receiving and support. This creates a clear purchasing record without treating a quote request as an online payment or an approval of a clinical operating configuration.
Common questions
Does a 50 L/min specification give a setting for a clinical procedure?
No. It is a manufacturer maximum-flow equipment reference. Clinical selection and operation require the applicable instructions and the responsible trained team.
Does HS50 include the imaging tower?
The insufflator is a separate device. Request the camera system, display, optics, illumination and support equipment as individual quotation lines where required.
Request your HS50 quotation from Franance.
Request your Mindray HS50 quotation from Franance with the actual unit, compatible accessories, quantity, destination in Nigeria and any installation or support work to be considered.
Choose quantity