Buy Carestream CS 8100 Panoramic Dental X-Ray System
in Nigeria.

Where can I buy a Carestream CS 8100 in Nigeria?

You can request a quotation from Franance using the CS 8100 brand-filtered listing. Include your facility, city and state, quantity, intended examinations, room dimensions, and whether cephalometric imaging is required. Ask for a quotation that identifies the exact system configuration, software, accessories, delivery and installation scope. Franance will contact you by phone or email to clarify the order and provide the commercial offer.

This is not an online purchase. The catalogue page does not confirm an available unit, stock location, price, shipping lead time, warranty or local support. Request written confirmation for your destination and project. If the CS 8100 is being procured as part of a new dental imaging room, send the room plan and details of the associated workstation, image-management software and other equipment so the configuration can be reviewed before a quote is finalized.

The CS 8100 name must be kept distinct from similarly named Carestream systems such as CS 8100 3D, CS 8100SC and newer CS 8200 products. This page is about the original CS 8100 digital panoramic system. If your specification says “3D,” “CBCT,” or a specific cephalometric configuration, include the full designation and ask Franance to confirm the catalogue model and manufacturer reference before proceeding.

What is the Carestream CS 8100?

The CS 8100 is a digital extraoral panoramic X-ray system from Carestream Dental. The manufacturer presents it as a compact system for everyday general practices and orthodontic offices. Its page describes full panoramic and segmented panoramic imaging, maxillary sinus, lateral TMJ options and 2D+; it also says the platform can be upgraded with a cephalometric arm. Those are manufacturer-described exam and configuration capabilities. Clinical selection, image acquisition and interpretation belong to qualified professionals using current manufacturer instructions and local requirements.

Carestream describes face-to-face patient positioning, preset programs, a CMOS panoramic sensor, a high-frequency generator and its Tomosharp image-processing approach. The product page also lists four patient-size choices, three dental-arch morphologies and exposure times of 4–14 seconds. These details can help a clinic evaluate workflow and room planning, but they do not establish a guaranteed diagnostic outcome or replace a site demonstration and technical review.

When requesting a quotation, specify “Carestream Dental CS 8100 panoramic system” and state whether the cephalometric arm is needed. Avoid using “panoramic” alone, since the category contains several systems, or “CS 8100” without clarifying whether the request is for the 2D model or a different derivative. Browse the dental OPG category to compare related equipment and the Carestream CS 8100 listing for the brand-specific record.

Does the CS 8100 include cephalometric imaging?

Carestream’s product page says the CS 8100 can be upgraded with a cephalometric arm and presents technical illustrations both with and without that arm. The manufacturer’s standard technical dimensions, weight and minimum required room space on the page are explicitly associated with the CS 8100 without cephalometric arm. Do not assume cephalometric hardware, software, installation components or room clearances are included in a standard unit quotation.

If your facility requires cephalometric imaging, state that requirement in the initial enquiry and ask for the exact product designation and item references. Request confirmation of what the arm adds to the package, which exams and software are supported, how the configuration affects the footprint and installation, and whether any additional accessories or workstation requirements apply. If the room was designed around the standard unit, have the project team verify whether the cephalometric option changes the intended layout.

If cephalometric imaging is not required, ask Franance to quote the standard CS 8100 without the arm and identify that configuration explicitly. This reduces the risk of comparing a standard panoramic package with a system configured for additional imaging. The product’s appearance in a marketing image should not be treated as evidence of which version is being sold; use the manufacturer reference and written package schedule.

Which examinations and workflow options should I review?

Carestream lists full panoramic, segmented panoramic, maxillary sinus, lateral TMJ ×2, lateral TMJ ×4 and 2D+ modes for the CS 8100. The product page also describes segmented bitewing imaging and optional cephalometric imaging. Ask the clinical team to identify the exams the practice expects to perform and confirm those against the offered configuration and current manufacturer documentation. This guide does not direct users on when to order an exam or how to interpret an image.

Carestream describes face-to-face positioning and preset programs, with four patient-size options and three dental-arch morphology options listed in its specifications. For procurement, request the current training and user resources that accompany the offered system. Confirm the imaging software version, workstation and interface requirements, data-storage approach, image export options and compatibility with existing practice systems. These are important operational choices but are not fully determined by a model name.

The page identifies CS Imaging Software version 8 in its software section. Confirm which software and licence are included in the offered package, whether updates or additional modules are required, and whether the clinic’s existing computers meet current requirements. Ask that software, accessories and installation assumptions be itemised so that the team can review the full deployment cost before placing an order.

What are the CS 8100 dimensions and room requirements?

Carestream’s technical page lists the standard CS 8100 without cephalometric arm at 330 mm long × 894 mm deep × 1596 mm high, with a weight of 72 kg. It gives minimum required space as 1200 mm × 1400 mm × 2400 mm. Those values should be tied to the configuration that the source names. The cephalometric-arm version is shown separately, so ask for the dimensions, weight, packing data and room requirements that apply to the exact model and options being quoted.

Room planning should include more than the equipment footprint. Show the unit position, patient approach, wheelchair access if required, operator position, room entry, nearby cabinetry, workstation, network and power points, service access and the patient path. Confirm the ceiling height, doorway and corridor clearances, route from unloading point to the room and any turns or lifts that may affect delivery. Ask the supplier to review the proposed location against current manufacturer planning drawings.

The manufacturer’s stated minimum space does not certify that any particular room is ready for installation. Have qualified local professionals determine site preparation, radiation protection and any regulatory steps required for your facility. Ask Franance to state whether its quote includes installation, commissioning, training or site survey and which responsibilities remain with the customer. Confirm all site requirements before purchase and before construction or fit-out work is finalized.

What image sensor and technical specifications should I check?

Carestream lists a CMOS panoramic sensor with a 64 × 1312 pixel matrix and a 6.4 × 131.2 mm image field. It specifies a magnification of 1.2 ±10%. The generator specifications on the page include tube voltage of 60–90 kV, tube current of 2–15 mA, 140 kHz frequency, a 0.5 mm focal spot and total filtration greater than 2.5 mm aluminium equivalent. The listed exposure time is 4–14 seconds. Treat these as manufacturer-listed specifications for the page’s CS 8100 system, and verify they still apply to the exact regional configuration quoted.

Use technical values to prepare a specification comparison, not to prescribe clinical parameters. Ask for the current technical documentation, system label and regional product reference with the offer. If your tender sets minimum requirements, ask the supplier to provide a line-by-line compliance response. Any exception, optional feature or software dependency should be clearly noted so the procurement team can evaluate it.

The CS 8100 should not be mistaken for a CBCT/3D scanner. The manufacturer’s page is for a panoramic system and lists 2D panoramic capabilities. If a project requires 3D volume imaging, specify that directly and compare products under the appropriate CBCT/3D category. Likewise, cephalometric capability is tied to a separate arm option and should be named in the quote rather than assumed from the model family.

How should I plan software, installation and facility integration?

Before requesting the final quote, identify the workstation and imaging software in the clinic. Ask Franance and the manufacturer or software provider to confirm the required computer specifications, operating system, licensing, network, image storage, export and backup workflow for the offered system. The product page identifies CS Imaging Software version 8, but does not prove which licence, workstation or integration is included with an individual quote.

If the CS 8100 is replacing an older panoramic unit, list the existing software, image archive, workstation, network and any migration requirements. If it is a first installation, provide the new room plan and identify who is responsible for power, networking, radiation shielding, building work, installation and acceptance checks. A quotation should separate equipment from site preparation and professional services so the customer can see the full project scope.

Ask for the current manufacturer pre-installation and user documentation for the exact version. Confirm delivery packing dimensions and installation access. A 72 kg unit weight does not describe its packed weight or how it must be moved. Franance should confirm its delivery and installation coverage for the actual Nigerian city and state, and state any prerequisites or exclusions in writing. Do not infer nationwide installation from the catalogue listing alone.

How should I compare the CS 8100 with other panoramic systems?

Compare modality and configuration first. Confirm whether the clinic needs 2D panoramic images only, segmented exams, TMJ or sinus workflows, 2D+ or cephalometric capability. Then compare the detector, examination options, software, patient positioning, room envelope, weight, power, installation scope, workstation, accessories and support terms. Verify which options are standard and which require an arm or other paid configuration.

For projects considering both panoramic and CBCT, keep the clinical requirement explicit. A panoramic system and a 3D CBCT system are different equipment classes, even where product families have similar names. A product description or image cannot replace review of the current technical datasheet and exact system reference. The dental OPG X-ray category helps compare panoramic products, while the broader Carestream Dental filtered listing provides the brand context.

If a tender names CS 8100, ask the supplier to identify whether the quote includes the standard system or cephalometric configuration, software, workstation, installation and training. If alternatives are allowed, request a separate option schedule with the differences called out. This makes technical and commercial review more reliable than comparing a single headline price.

What should I include in a quotation request to Franance?

Include the full name “Carestream Dental CS 8100,” the requested 2D panoramic configuration, quantity and facility location. State whether the cephalometric arm is required, list the intended examination options and describe your existing software and workstation. Attach the floor plan and note the room dimensions, route to the room, door or lift limitations and target installation period. If the request is part of a larger clinic project, identify the responsible project contact and any tender schedule.

Ask Franance to confirm the offered manufacturer reference, configuration, software and licences, accessories, dimensions, weight, packing and installation prerequisites. Have the quote state price, availability, delivery, warranty, installation, commissioning, training and exclusions for the Nigerian destination. Confirm who is responsible for site preparation, permits and radiation protection. Ask for the current manufacturer documents and any compliance response needed for the procurement file.

Start with the Carestream CS 8100 filtered catalogue listing or contact Franance about a CS 8100 quotation. Franance will follow up by phone or email. The enquiry is a quote order; no online payment is processed through this page.

Frequently asked questions about the Carestream CS 8100

### Is the CS 8100 a 3D CBCT scanner?

This product record covers the CS 8100 digital panoramic system. Do not confuse it with CS 8100 3D or other related models; confirm the exact designation on the quotation.

### Does the standard CS 8100 include a cephalometric arm?

Carestream describes the arm as an upgrade option and shows specifications with and without it. Ask the quotation to identify the configuration and included arm explicitly.

### What room space does the CS 8100 need?

Carestream lists minimum space of 1200 × 1400 × 2400 mm for the standard CS 8100 without the cephalometric arm. Confirm requirements for your exact configuration and room plan.

### What exams are listed for the system?

The manufacturer lists full and segmented panoramic, maxillary sinus, lateral TMJ ×2 and ×4, and 2D+ options. Confirm the exact offered configuration and current documentation.

### Can the CS 8100 be installed anywhere in Nigeria?

The product page does not establish Franance’s installation or service coverage. Provide your city and state and ask Franance to confirm delivery, installation and support scope for that order.

### Can I buy it online?

No. Submit a quotation request; Franance follows up by phone or email with pricing and terms.

### What should I send for a quote?

Send the configuration, cephalometric requirement, quantity, facility location, room dimensions, software details and requested installation or training scope.

Request a Carestream CS 8100 quotation from Franance

Tell Franance whether you need the standard panoramic system or the cephalometric arm option, which exams matter to your clinic, and what software, room and installation needs must be checked. Provide the number of units, delivery address in Nigeria and project timing. Use the CS 8100 listing or contact Franance for this model. Ask for a written quotation that identifies the exact configuration, price, availability, delivery and service terms.