Oxygen Concentrators in Sudan
Available Oxygen Concentrators Models

An oxygen concentrator is a medical device that purifies ambient air to deliver supplemental oxygen to patients with respiratory conditions. Unlike oxygen tanks that store compressed oxygen, concentrators draw in room air (which is approximately 21% oxygen, 78% nitrogen, and 1% other gases) and separate the oxygen from the other gases. This process is typically achieved using a sieve material, often zeolite molecular sieves, which adsorbs nitrogen and other trace gases under pressure, allowing a concentrated stream of medical-grade oxygen (typically 85-95% pure) to pass through to the patient. This continuous, on-demand supply of oxygen is crucial for individuals experiencing hypoxemia, a condition characterized by abnormally low levels of oxygen in the blood.

Oxygen concentrators are vital medical devices with broad applications across Sudan's healthcare landscape. Their need spans from large, specialized teaching hospitals to smaller, community-focused rural clinics. The continuous and reliable supply of medical-grade oxygen is critical for patient care in various departments, ensuring timely and effective treatment for a range of respiratory and life-threatening conditions.

Ensuring your oxygen concentrator is installed correctly is paramount for its optimal performance and longevity, especially in the demanding conditions found in Sudan. Our comprehensive installation process is designed to be efficient, reliable, and tailored to your specific requirements. We understand the importance of a seamless setup to guarantee uninterrupted patient care and operational continuity for your healthcare facility.

Site Preparation

Before delivery, proper site preparation is crucial. Our team will provide detailed guidelines to ensure the designated installation area meets the necessary specifications. This typically includes:

• Adequate Ventilation: The area must be well-ventilated to allow for efficient heat dissipation from the concentrator, preventing overheating and ensuring consistent oxygen production. Avoid confined spaces or areas prone to dust accumulation.

• Stable Power Supply: A reliable and stable power source is essential. We will advise on voltage and frequency requirements to prevent damage to the unit and ensure continuous operation. Surge protectors are highly recommended.

• Cleanliness: The installation environment should be clean and free from excessive dust, debris, or chemical fumes, which can impact the purity of the generated oxygen and the lifespan of internal filters.

• Accessibility: The chosen location should allow for easy access for installation, maintenance, and potential servicing without disrupting patient care.

• Proximity to Oxygen Outlet: Consider the proximity of the installation site to the point-of-use for patients to minimize the length of oxygen tubing and maintain optimal pressure.

Delivery And Unpacking

Upon arrival, our trained technicians will carefully transport the oxygen concentrator to the prepared site. The unit will be gently unpacked, and a thorough visual inspection will be conducted to confirm there is no damage incurred during transit. All accessories and user manuals will be accounted for at this stage.

Installation Steps

Our expert technicians will follow a systematic installation procedure:

• Positioning the Unit: The concentrator will be placed in its designated, prepared location, ensuring it is level and stable.

• Connecting Power: The unit will be securely connected to the prepared power source, utilizing appropriate surge protection.

• Attaching Accessories: Humidifier bottles (if applicable), oxygen tubing, and nasal cannulas or masks will be connected according to the manufacturer's instructions and your specific patient needs.

• Initial Power-Up: The concentrator will be powered on for the first time to initiate the system check and allow internal components to stabilize.

Calibration And Testing

Calibration is a critical step to guarantee the concentrator is delivering oxygen at the specified purity and flow rate. Our technicians will perform the following:

• Flow Rate Adjustment: The flow rate will be meticulously set to the prescribed level for the patient or application.

• Oxygen Purity Verification: Using calibrated purity analyzers, the output oxygen concentration will be verified to meet medical-grade standards (typically >90%).

• Pressure Testing: System pressure will be checked to ensure it is within the manufacturer's recommended range.

• Alarm System Check: All safety alarms (low oxygen, power failure, etc.) will be tested to confirm they are functioning correctly.

• Performance Monitoring: The unit will be run for a specified period to ensure consistent performance and stability under operating conditions.

Upon successful completion of the installation and calibration process, our technicians will provide a comprehensive handover, including a demonstration of the unit's operation and basic troubleshooting for your staff. We are committed to ensuring your oxygen concentrator is ready to provide reliable medical oxygen in Sudan.

The cost of oxygen concentrators in Sudan can vary significantly, influenced by factors such as brand, model, capacity, and whether it's a new or used unit. For new, reliable oxygen concentrators suitable for home or small clinic use, you can generally expect prices to range from approximately SDG 250,000 to SDG 800,000. Portable models might fall at the lower end of this spectrum, while more powerful, continuous-flow units for clinical settings could be priced higher.

Used or refurbished oxygen concentrators can offer a more budget-friendly option, potentially starting from around SDG 150,000. However, it's crucial to ensure the condition and functionality of any pre-owned device, ideally with a thorough inspection or warranty. Prices can also fluctuate based on import duties, shipping costs, and the specific retailer or distributor in Sudan.

We understand that budget is a critical consideration for healthcare providers and individuals in Sudan. That's why we offer a range of value-focused oxygen concentrator options designed to deliver essential respiratory support without compromising on quality. Our selection includes meticulously inspected and certified refurbished units, offering significant cost savings while providing reliable performance. We also feature demo models that have seen minimal use and are available at attractive price points. For those seeking the most economical solution, our entry-level systems are designed to meet fundamental oxygen needs efficiently and affordably.

When sourcing critical medical equipment like oxygen concentrators in Sudan, reliability and trust are paramount. Franance Health stands out as a premier choice for businesses seeking genuine, high-quality oxygen concentrators. We understand the unique demands of the Sudanese healthcare landscape and are committed to providing unparalleled support and product integrity.

When you invest in an oxygen concentrator for your facility in Sudan, you can expect a comprehensive package designed for immediate deployment and ongoing use. Our standard configuration ensures you have all the essential components to provide reliable oxygen therapy. While specific models may vary, the typical contents of the box are outlined below, ensuring you are equipped with high-quality, durable, and user-friendly equipment.

We understand that reliability is paramount when investing in medical equipment. Our oxygen concentrators for the Sudanese market come with robust warranty and comprehensive maintenance plans designed to ensure uninterrupted operation and peace of mind. We offer standard warranty terms covering manufacturing defects and performance issues, providing you with essential protection. Beyond the initial warranty period, our tailored Preventive Maintenance (PPM) plans are crucial for extending the lifespan of your concentrators and preventing unexpected breakdowns. These scheduled check-ups are performed by our certified technicians, ensuring optimal performance and adherence to safety standards. Furthermore, we maintain readily available stocks of genuine spare parts within Sudan, ensuring swift replacements and minimizing downtime should any component require servicing or repair. Our commitment is to provide a complete lifecycle support solution for your oxygen therapy needs.